Plate Shear - Mechanical

RAS 52.31

Condition: good (used), functionality: fully functional, Sheet width: 3100 mm Kdsdjy Tntxspfx Anwjn Sheet thickness: 2.00 mm Sheet thickness for stainless steel: 1.25 mm Stroke rate: max. 36 strokes/min Cutting angle: 0.9 degrees Table height: 800 mm Table width: 430 mm Frame width: 3200 mm Rear gauge – adjustable: 5.0 - 750 mm Motor power: 3.0 kW Machine weight approx.: 1950 kg Dimensions L-W-H: 3730 x 2070 x 1400 mm Equipment: - robust / motorized oscillating shear - machine with manual material/rear gauge * Travel distance 5.0 – 750 mm gauge depth * analog position display * manual adjustment from the front - shatter-resistant, torsion-resistant steel welded construction - compact and clearly designed machine construction - 1x clamping beam * Clamping beam opens before the blade beam moves upwards * prevents buckling of very thin sheets - manual adjustment of the cutting clearance - integrated sheet support system for thin sheet cutting - sheet/cut piece removal from the front (operator side) - 1x side gauge with mm scale - 3x table extensions - 1x freely movable foot switch

Condition: used, Year of construction: 1993, Technical details: Kdsdou Rni Hepfx Anwsn sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 3,64 x B: 2,55 x H: 1,58 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. Kdjdpsxabc Rsfx Anwjn With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams Kdodpfx Aowd Emkjnwsn The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: used, sheet width 2540 mm plate thickness 2.00 mm thickness at "Niro-steel" 1.25 mm no. of strokes max. 63 Hub/min cutting angle 1.13 Grad table height 750 mm table width 320 mm distance between columns 2620 mm back stop - adjustable 5.0 - 550 mm Control konv. engine output 3.0 kW weight of the machine ca. 1600 kg range L-W-H 3100 x 1980 x 1400 mm Equipment: - robust / motorized swing cut guillotine shears - break-proof, torsion-free steel welded construction - compact and clear machine design - manual back stop, with analogue display * adjustable from the front * stepless adjustment over the entire travel range - recessed grips in the support table Kdodpoxacftjfx Anwen - 1x hold-down bar - 1x side stop - 3x support arms - 1x freely movable foot switch - operating instructions (PDF) Special accessories included: - sheet metal holding device for thin sheet metal cuts

Condition: good (used), Year of construction: 1999, sheet width 3050 mm plate thickness 2.5 mm thickness at "Niro-steel" 1.5 mm no. of strokes max. 35 Hub/min cutting angle 2°10 table height 905 mm table width 390 mm back stop - adjustable ca. 750 mm Control konv. engine output 3.0 kW weight of the machine ca. 1750 kg range L-W-H 3730 x 2070 x 1400 mm New price approx. 45.000 euros (!!) Special price on request Equipment: - robust / motorized swing cut guillotine shears - Machine with electric material / backgauge * Traverse path approx. 750 mm (infinitely variable adjustment range) * analog position indicator * Manual adjustment from the front - unbreakable and torsion-free welded steel construction - Compact and clear machine construction - 1x hold-down beam - Integrated sheet holding system for thin sheet blanks - sheet/cut material removal at the front (operator side) - 1x side stop with mm scale Kedpsy U N H Aefx Anwedn - Extendable table extension (approx. 350 mm) - 1x freely movable foot switch - operating instructions