Folder

RAS 62.25 TurboBend Plus

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. Redpfx Agohzbipsrobt - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 1997, condition: excellent (used), machine/vehicle number: GO 832 833, Demag ELKE crane canopy crane track bridge crane hall crane 2x available!!! Payload / lifting capacity 1.6 to 1600 kg Track 11785 mm, external dimensions approx. 12000 mm Year of manufacture 1997 with floor control Lifting height 3 m Height from top edge of crane girder to bottom edge of hook approx. 900 mm Head girder length approx. 200 cm Crane is dismantled and immediately available Matching busbars can also be supplied. Please enquire Very good condition, inspection book is available Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Rbedpfeum I Akjx Agrjt Shipping by freight forwarder possible, please enquire by postcode Pickup preferred

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Rjdpfji Dx Sbsx Agrebt

Condition: as good as new (ex-display), For sale Demag wheelblocks Rjdoh Uqibspfx Agrjbt New and uses NB! we have more than 15,000 Demag parts in stock see our website or other ads

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg Rbjdpfxsuhf Tzo Agrjt The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Rbedpfxelffdys Agrot Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Condition: ready for operation (used), machine/vehicle number: 03890317, Machine number: 03890317 // See pictures for condition and details Redet A A Aqspfx Agrobt

Condition: good (used), Year of construction: 1998, machine/vehicle number: 0518018, Offer 24600 Technical data: - suitable for welding steel, aluminum, special metals, Cr Ni, etc. - welding current 450 A 60% ED - 360 A 100% ED - welding current adjustable from 3 A - 450 A - Synergic setting control FRONIUS - water cooling device FRONIUS - separate wire feed case - intermediate package device - wire feed case 14 linear meters - 4 rollers wire feed continuously adjustable Rbodpfx Aevncfmjgrjt - MIG - MAG hose package water-cooled approx. 4 linear meters - ground cable - pressure reducer - mobile base frame - connection 400 V / 6.6 A / 8.7 kVA - space requirement approx. W 650 x H 900 + 450 x D 1100 mm - weight approx. 200 kg

Condition: good (used), Year of construction: 1991, Sheet width 2500 mm Sheet thickness 4 mm Rodjtq S T Njpfx Agrebt Cutting angle 1.49 ° Strokes per minute 40-80 Stand projection 200 mm Number of hold-down devices 13 pieces Backgauge - adjustable 5-1000 mm Table height 750 mm Oil capacity 85 l Air pressure - required 5 bar Machine weight approx. 3600 kg

Year of construction: 1989, condition: ready for operation (used), A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible. Rsdpjvf Ixyjfx Agrjbt