Reckermann FW universal milling machine

Reckermann Typ Kombi 900

Condition: excellent (used), Deckel FP1 AKTIV (3-Axis Active) Machine no.: 2102-3240 Year of manufacture: approx. 1988 Travel paths: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2,000 rpm Motor power: 1.6 and 2 kW Power supply: 380 V, 50 Hz Equipment/Accessories: Nedpfx Aajyll A Te Islc - Active digital readout, 3 axes, HEIDENHAIN type TNC 113 - Infinitely variable feed in X, Y, and Z axes - Vertical milling head quill travel: 60 mm - Vertical milling head swivels and extends 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Central lubrication system - Machine vice - Various toolholders/collets/tools Space required (L x W x H): 1,350 x 1,100 x 1,700 mm Weight: 850 kg The machine has been visually reconditioned and technically inspected. Geometry inspection videos can be provided upon request. Backlash Y axis: 0.1 mm Backlash X axis: 0.2 mm Backlash Z axis: 0.15 mm Runout horizontal spindle: 0.001 mm Runout vertical spindle: 0.001 mm Parallelism deviation Y axis: 0.002 mm (measurement path: 150 mm) Parallelism deviation X axis: 0.01 mm (measurement path: 300 mm) Geometry inspection videos can be provided upon request. The following parts have been renewed: - Gears in horizontal head replaced and gear shaft newly mounted - New guide cover for Z axis + various attached parts - Machine refurbished - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse Nsdpfeyi Amwox Aa Ijlc 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: used, Technical details: x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg Nedpju U E T Isfx Aa Ielc dimension machine xH: 1,8 x 1,35 x 1,95 m Milling machine with shaping head joint length 32-80mm with 10 x double strokes, 24-285 strokes/min Heidenhain 3-axis displays *

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: Nlodsu Tuk Hepfx Aa Iec - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Nljdjx A Eddopfx Aa Iec Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: used, Year of construction: 1976, x-travel 350 mm Njdpfx Aaewwwr Es Iolc y-travel 150 mm z-travel 340 mm table surface area 600 x 210 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min rapid traverse 1,2 m/min total power requirement 1,9 kW weight of the machine ca. 0,7 t - machine out of teaching shop - Accessories: solid table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, various tool fixtures, various collets, original DECKEL tool cabinet

Condition: used, 1 used column-type drilling machine Brand: Alzmetall Model: AB 3 ESV Drilling capacity: Ø 32 mm 3 automatic feed rates Spindle taper: MK 3 Nlodeyqr Dhjpfx Aa Iec Distance spindle nose - table: 545 mm Throat: 290 mm Quill travel: 160 mm Column diameter: Ø 220 mm Dimensions: 1150 x 650 x 2000 mm Weight: 850 kg

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Nsdpfx Aajy Awz Ro Ielc Rapid traverse 1.3 m/min Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad Nlodeyz Dg Depfx Aa Isc spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm Nlodpfoy En I Hsx Aa Ioc - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg