MIG-MAG gas-shielded arc welder

REHM SYNERGIC-PRO 2/450-4

Condition: excellent (used), Manufacturer: REHM Type: Synergic. PRO 2 450-4 Machine condition: very good used ///// Price given for 1 pc ///// Welding current setting range 45A/16V - 450A/36.5V Weight ca.130kg SMC technology - Smart Machine Control A unique regulation concept for step-adjustable devices developed by Rehm: The welding arc length is regulated not only by measuring the welding voltage and current intensity but also by digitally determining the wire feed speed. This allows for achieving excellent welding effects and makes operation easy and safe. - SDI - Stepless Dynamic Induction The smoothly adjustable coil automatically takes care of the exceptional arc ignition properties and its high stability during welding. Adjustment can be done manually using the SDI knob. This allows for the regulation of the heat input, which can have a positive effect on the amount of necessary post-welding processing. - RSC – Realtime Speed Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. By using RSC, changes in the arc length are compensated faster and more effectively. - CCM – Characteristic Curie Memory Podsv Nrfxjpfx Agqjgw A database of welding parameters integrated in the device with expert knowledge. By selecting a set of wire type and diameter and welding current voltage level, the previously set welding parameters are synergistically selected. During welding, the current parameter values are compared with the set parameters and, if necessary, immediately corrected. - RMI – Rehm Machine Interface The control panel of the device is extremely simple and guarantees the avoidance of erroneous selection. Simple selection of parameters facilitates the welder's work and allows for minimizing errors and minimizing the time of setting the device.

Condition: excellent (used), Year of construction: 2018, functionality: unexamined, Technical data: Machine type F135/F155 Measuring range Distance between C- and Z-axis 270 mm Maximum measurable diameter 320 mm Maximum measurable height 350/550 mm Maximum table load 25 kg Rotation axis (C-axis) Turntable diameter 150 mm Manual alignment of the workpiece Roundness deviation in the rotation plane. Table 0.03 µm + 0.0005 µm/mm Measured height *Roundness deviation in the plane of the rotary table 0.015 µm + 0.00025 µm/mm Measured height axial run-out error 0.04 µm + 0.0005 µm/mm Radius *axial run-out 0.02 µm + 0.00025 µm/mm Radius centering range +/- 2mm Inclination range +/- 0.6˚ Rotation speed 1-10 rpm Rotary bearing air Vertical axis (Z-axis) Effective height 350/550 mm Straightness deviation 0.15 µm/100 mm (0.3 µm/350 mm/0.4 µm/550 mm) Parallelism of the C and Z axis 0.8 µm/350 mm/1.3 µm/550 mm Anti-collision protection yes Horizontal axis (R-axis) Effective length 170 mm Pedpouh Ufaefx Agqjgw Dimensions Length 700 mm Width 410 mm Height 950 mm Weight approx. 185 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195311, Offer 24601 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m Podpjvt Trzofx Agqegw - Ground cable - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 195312, Offer 24596 Technical data: - Welding current max. 450 A 60% ED - 320 A 100% ED - Welding current adjustable in 3 coarse steps + 12 fine steps - 50 to 450 A - separate wire feed case with intermediate package 1 m - 4 roller wire feed continuously adjustable - 2 cycle + 4 cycle – regulation - Digital volt + amp display - Spot welding - Interval welding - Water-cooled hose package 4 m - Ground cable Pgjdpjvt Tvmofx Agqow - Pressure reducer - Connection 400 V / 50 Hz / 63 A - Space requirement approx. W 750 x D 1100 x H 1600 mm - Weight approx. 180 kg

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Podjxddamspfx Agqsgw

Condition: used, Year of construction: 2015, 1 used automatic band saw Manufacturer: Mebapro 260 AP Year of manufacture: 2015 Technical data: Type: Straight cutting saw 90° Pjdpfx Agexfiu Seqegw Max. cutting width (mm): 300 Max. cutting height (mm): 260 Max. cutting diameter Ø (mm): 260 Cutting speed: 15 - 150 m/min Minimum remaining workpiece length: 20 mm Saw band drive power: 1.5 kW Saw band tension: Mechanical Saw band dimensions: 3700x27x0.9 mm Working height: 750 mm Weight: 1050 kg Dimensions: 1500x1800x1850 mm NC-controlled, automatic material feed with hydraulic total-stroke clamping Easy operation via NC control with plain text display Material pre-positioning function without reclamping for short lengths Stable, linear-guided feed vice with servo positioning for maximum accuracy Automatic band guide adjustment to material width Powered chip brush, synchronized with band speed

Condition: new, Year of construction: 2024, functionality: fully functional, Machine type: Automatic Mitre Band Saw Band dimensions: 3510 x 27 x 0.9 mm Cutting capacity (square): 250 x 300 mm Cutting capacity (round): 250 mm Bundle cutting: 150 - 250 x 100 - 130 mm Cutting speed: 20 - 80 m/min Main drive motor power: 2.2 kW Psdpfx Asxk Ti Rogqogw Hydraulic pump motor power: 0.75 kW Coolant pump motor power: 0.125 kW Table height: 750 mm Weight: 1430 kg Dimensions (W x D x H): 2210 x 2290 x 1890 mm

Condition: good (used), Year of construction: 2007, total height: 700 mm, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Working height 700 mm Max. stroke 9999 mm Control panel  Memory 99 program with  Bundel clamp device  Pgodpfow R Squox Agqew New price 45.000 Capacity 90°:260° Length: 1800mm Width: 2475mm Height: 1600mm Weight: 1700kg