Universal milling machine

REIDEN FU 100 A

Condition: used, Description Kpx2Z Digital display (3 axis) Technical data: Clamping surface 1100 x 300 mm Longitudinal travel 700 mm cross travel 250 mm Vertical travel 470 mm Spindle speeds 45 - 2000 rpm. ISO 40 mounting 12 milling feeds Longitudinal and transverse 18 - 800 mm/min. vertical 7,2 - 320 mm/min. Drive motor of the milling spindle 7 PS Drive motor of the table 1,5 PS Machine weight approx. 2050 Kg

Year of construction: 1980, Condition: good (used), - Table size: 1250x350 mm - Travels X / Y / Z: 850 x 250 x 470 mm - Spindle mount: ISO40 - Spindle speeds: 45-2000 rpm. / à 24 steps - Horizontal and vertical spindle in the same milling head - Swiveling in the head: +/- 90 ° - Gear bar displaceable (Y axis) Bbsamlpd7F - digital display Heidenhain (3 axes) - Coolant pump - div. on accessories - Weight: about 2150 kg - Space required: approx. 1900 x 2000 x 1700 mm

Condition: excellent (used), Digital readout Heidenhain 3 - axes. Various fixtures Table 1250 x 350 mm longitudinal travel 850 mm Cross travel 250 mm Vertical travel 470 mm Bivsia9Zxq Spindle speeds 45 - 2000 rpm. Mounting ISO 40

Condition: good (used), Table size 1250x350 mm Working travels 850x250x470 mm Spindle taper 40 Spindle speeds 45-2000 rpm Yd0Zjlx2 With digital read-out Misc. accessories MARCELS MASCHINEN AG

Condition: refurbished (used), Centrifugal Pump Manufacturer: CALPEDA (Italy) Type:NM 100/200 D/A Cna88Cp9Dm Power: 22 kW /2900rpm Q min/max 108/270 m3h H max/min 36/19 m Available:2 pcs Condition: Used ( Both pumps are refurbished -changed bearings on pump and motor (NSK) ) Price is per pcs. (if bought together there will be discount in price) If you need more information , pictures or measurments do not hesitate to contact us!

Condition: good (used), Speed adjustable with a frequency converter, cast steel housing and impeller. In new condition, little used. Manufacturer: GRUNDFOS Type: TPE 100-390/2 A-F-A-BAQE-QX1 Article number: 96110285 Nominal volume flow: 171 m³/h Nominal pressure: 16 bar Nominal transport height: 34 m 2Wstyi Installation length: 550 mm Engine power: 22 kW

Year of construction: 2024, Condition: new, Fuel type: electric, Workshop loader for stationary and traction batteries Use - Adjustable unit for electroplating and electrochemistry - Service use in stationary applications (in case of defect of the charger) - Formation of new batteries - Possibility of charging batteries with IU or IUa Characteristics - Regeneration (desulphation, equalization charge) of batteries of any type Adjustability, operation - Manual setting of parameters on the front panel - Wide range of settings: 0 - Imax, 0 - Umax (depending on the type) - Possibility to switch off the device automatically after the Engewpz the set time - Possibility of automatic switch-off of the device after delivery of the set Ah - Possibility of operation without time limit - possibility of external operation (switching on and off) - possibility of external signaling (optical, potential-free) The assortment of device types is very wide. If you send us your requirement profile you will receive your special offer. For further information we are of course at your disposal

Condition: good (used), Year of construction: 2018, Functionality: fully functional, Machine/vehicle number: 2018000607, Digatron BNT-ME Flexible test system for battery modules up to 60 volts C0Hgsft0Ze The Digatron BNT-ME was developed to test battery modules in the voltage range from 0 to 60 volts and up to 250 amps. The device is particularly impressive when testing traction batteries, components for the 48-volt vehicle electrical system, batteries for small BEVs or traction batteries. Ideal for laboratories that want to rely on a functional solution with "Made in Germany" quality.

Year of construction: 2001, Condition: excellent (used), Conveyor U. Dosing unitsBrand: A. TschritterType: WC 100BJ 2001 Stho7C

Year of construction: 2009, Condition: reconditioned (used), 100t turning roll, rollerbed workpiece diameter 500mm-7.500mm speed 130-1.250mm/min 8T8Zlvlgap availible for renting

Condition: used, Grundfos CR10-04 A-FJ-A-E-HQQE Vertical centrifugal pump 3x 230V Pipe diameter: 42mm Flanch Ø: 150mm 1,5 kW For further technical data see type plate. You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Fbkzt7Zkl Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: refurbished (used), Year of construction: 2023, Diameter of working spindle 100 mm C0Httnb77Q Travel X-axis 1600 mm Travel Y-axis 1120 mm Spindle speed 7 - 1120 /min. Spindle travel - W axis 900 mm Travel Z-axis 1250 mm Spindle taper ISO 50 . Max. load of table 3000 kg Machine dimensions l x w x h 6710 x 3450 x 3000 mm Machine weight 14000 kg Main motor power 11 kW Total input 17 kVA Clamping area of table 1250 x 1250 mm Face plate diameter 600 mm Max. diameter of face turning 900 mm Machine is overhauled. Hand-controlling horizontal borer machine with fixed stand and cross-adjustable table. The machine is in the following version: X, Z, Y ground, traverse milled and undercut, more precisely glued with special material with sliding properties (Turcite, GS-super fluid, etc.), wedges ground and scraped. The worktable surface is grinded and scraped (reinovation of grooves as required). The X and Y axes are equipped with trapezoidal screws with nuts - placed in bearing housings. Headstock - Gearwheel bearings from reputable manufacturers, main place as well as main spindle manufacturing by Fermat, hydraulic tool clamping. Automatic lubrication is controlled centrally through the dispensers - the manufacturer Hytos. The machine has a telescopic covering of X- and Z axes. Machine surface adjustment - varnish according to RAL 5010 (blue – depending on customer´s wish). Electrical switchboard with programmable controller, control panel on headstock. CE cable lines are installed throughout the machine and between the machine and the electrical cabinets. The machine is equipped with digital measuring with linear rulers with accuracy of positioning indication 0.01mm for axes (X, Y, Z, W) including measuring of the round table by rotary sensor (in the center of the table). Optical reading of the angle after complete overhaul. Contact me for price and more information.

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 941.92 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer Dpr29T users manual incl. pressure switch OPTIONS: time of delivery with options 2 - 3 months from order 4-fold round guidings € 1.900,- Light barrier € 7.300,- Siemens control for programming of stroke and press time € 4.000,- Siemens touchscreen-control, 50 programsstoreable, for programming: • Upstroke and downstroke quota • Break time in the bottom • time of Decompression • setting pressure of work • Pieces counter • prestop in upstroke and downstroke • setting for movement in manual and in automatic • management of alarms and anomalies € 9.000,- Working hour counter € 400,- Stroke counter € 400,- Deompression valve € 700,- Oil cooler with decompreission valve € 3.700,- Pressure switch € incl.

Condition: used, Year of construction: 2001, Baler Bollegraaf HBC 100 A, year of construction 2001 Technical data: Manufacturer: Bollegraaf Type: HBC 100 A Year of construction: 2001 Pressing force: 100 t Drive power: 75 kW Filling opening: 1100 x 1600 mm Capacity at 30 kg/m³: 16.2 t/h 50 kg/m³: 25 t/h 100 kg/m³: 47 t/h Bale size: 1100 x 720 mm (WxH), variable length Bale weight: 550-880 kg Tying: 5-fold vertical Dimensions: approx. 11750 x 2500 x 3470 mm (LxWxH) Weight: approx. 34000 kg Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or for any errors. The offer is subject to change, subject to prior sale and revocable at any time. Dpqau2 Viewings are possible by arrangement. The sale against prepayment is ex works, without warranty and guarantee.

Condition: used, TECHNICAL DETAILS Cyxs7Snqz3 Floor space - Dimensions (length-depth-height) : 550 x 500 x 600 [mm] - Weight : 48 [Kg] Power supply - Voltage : 230 [V] - Power supply : 50/60 [Hz]

Year of construction: 1984, Condition: used, Universal console milling machine, milling machine IMATEC type FU 100 R make no. 100178 R year of construction 1984 travel X: 700 mm, Y: 200 mm, Z: 300 mm table clamping surface 1000 x 230 mm Bmc2Luixu8 tool holder ISO 40 distance spindle nose - table max. 350 mm (vertical) Speed range 35 - 1500 rpm. 12 steps feed rate 10 to 362 mm/min. 9 steps Rapid traverse 2 m/min. Main spindle motor power 3 kW Feed motor power 1 kW Mains connection 400 Volt, 50 Hz - 3-axis digital display ELESTA, type Visulesta II - universal milling head tiltable in 2 axes - working table with 3 pcs. T-slots 14 mm, distance 65 mm - coolant device in the machine base - mechanical tool clamping via threaded spindle M16 space requirement L x W x H 1800 x 1650 x 1900 mm weight 1460 kg

Condition: used, Machine/vehicle number: BT1517112303, Retractable spiral mixer Kemper ST 100 A & 2x bowls Fzie7Fg Product description Manufacturer: Emil Kemper GmbH Type: ST 100 A Material: bowl, spiral and guide rod made of stainless steel Condition: used, functional, baker's condition Spiral is welded extendable spiral mixer Kemper incl. 2 extendable stainless steel bowls bowl with manual lock with 2 automatic timers with flour dust cover Kettle right left running for max. 100 kg flour, max. 160 kg dough Voltage: 380 Volt Power supply: 25 AMP / 50 Hz / 3 PH For details see pictures.

Condition: like new (used), Year of construction: 2022, Operating hours: 2 h, Functionality: fully functional, A Laser Source in extremely good condition! Only used for short test and stored in perfect enviromental. Dpovjb Orgnial shipping mold keept and can be used for shipping. Fibercable 5m Incase of buying more items (GalvoScanner/Electric Cards) The price will be lowered

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 36800 € 747.04 € 100 to fix Dpr2Gt 835 mm 500 mm 780 mm 1050 mm 25 mm/s 10 mm/s 4 mm/s 800 x 600 mm 700 x 350 mm 1800 mm 1000 mm 2400 mm 2050 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 27.600,00

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Travel distance X-axis: 420 mm, Travel distance Y-axis: 950 mm, Travel distance Z-axis: 650 mm, For sale is a Remak RX43 A handling system, which was installed on a Ferromatik injection molding machine The handling unit has been dismantled and stored in working order. Technical data Year of construction: 2008 Travel: 420*950*650 mm Power: 3 KW Max load: 100 kg Included: Teach Panel Switch cabinet B2F7Owrs90 Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, TECHNICAL DETAILS Floor space - Dimensions (length-depth-height) : 550 x 500 x 600 [mm] - Weight : 44 [Kg] Power supply Dpr0Bx - Voltage : 230 [V] - Supply : 50/60 [Hz]

Condition: used, Year of construction: 1974, max. wheel diameter 400 mm gear width NA mm max. module 1 min. module 10 total power requirement 12 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m K L I N G E L N B E R G (Germany) Automatic Bevel Gear Lapping Machine Model LKR 400 A 100 Year 1974/1998 Serial No. 1890 Partially reconditioned and electrically modernized in 1998 by Welter Company _____ Max. Ø of crown gear 400 mm Adjustment of pinion spindle 160 / 250 mm Adjustment of crown gear spindle 115 / 265 mm Additional movements: Axial / distance / vertical, approx. + / - 2 mm Automatic tooth clearance 0 - 0.6 mm Btr0Ot9Js3 Module 1 - 10 Axial offset, up / down, each 50 mm (= axial offset travel from middle position) Bore hole of driving spindle 100 taper Bore hole of driven spindle 60 taper 6 spindle speeds 900 - 1,800 rpm Total electrical load 12 kW - 380 V - 50 Hz Weight 4,200 kg Accessories / Special Features * Hydraulic workpiece clamping for both spindles. * Automatic lapping process. Following function can be preset: Clockwise / anticlockwise movement, lapping torque, pulling and pushing movement, 4 lapping programs, etc. * Protective hood for crown gears with a diameter up to 400 mm, with automatic closing mechanism. * Separate switch cabinet. * Separate hydraulic unit, etc. Price, ex stock EUR 29,500.-- The lapping process employed by this machine greatly improves the running performance of bevel gear pairs. Pinions and gears are meshed by up to three additional movements (axial, radial and vertical) which are controlled by cams. Tooth flanks are smoothed with the help of lapping medium, and contact patterns are corrected as necessary.

Condition: new, Functionality: fully functional, - Offer number: 113/116 - Standard cylinder - Manufacturer: Festo Bupwqyvgm0 - Type:DNC-100-160-PPV-A (163471) - weight : 5,8 KG - optical condition according to photos - New without OVP with traces of storage - functional - Shipping Germany-wide 8 € Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. If an item is opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.

Condition: good (used), 2 Spiral mixer 160 kg. of dough with 4 extraible bowls Blgpyri3Dm3

Condition: new, Functionality: fully functional, The following item is for sale: - Our offer number: 118/116 - Standard cylinder - Manufacturer: Festo - Type: Festo DNC-100-125-PPV-A (163470) - weight : 5,4 KG - optical condition according to photos - New with traces of storage - functional - Shipping Germany-wide 8€ Notes: The goods offered here usually come from company liquidations and bankruptcies. Due to missing type plates, it is not always possible to provide exact item data. The item pictures are original photos that show the actual condition of the item. If several identical items are offered, only one of the items will be photographed. There may be slight variations in the condition of the individual items. Bjx2Ux8Tcxm Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively to identify and describe the goods.