Vertical turret lathe
REM SC 35 CNC 1S

Year of construction

2018

Condition

Used

Location

Bacău

Show map

Machine data

Machine type:: Vertical turret lathe

Manufacturer:: REM

Model:: SC 35 CNC 1S

Year of construction:: 2018

Condition:: excellent (used)

Functionality:: fully functional

Operating hours:: 2,000 h

Price & Location

Location:: Calea Republicii 199, 600304 Bacau, România

Call

Technical details

Turning height:: 3,000 mm

Workpiece weight (max.):: 30,000 kg

Turning diameter:: 3,500 mm

Power:: 100 kW (135.96 HP)

Details about the offer

Listing ID:: A161-33426

Update:: 28.01.2025

Description

TECHNICAL CHARACTERISTICS

1. Max. machining diameter mm 3.500
2. Min. machining diameter mm 0
3. Max. height of the part mm 3.000
4. Max. load on the table to 30
5. Table diameter mm 3.000
6. Table speed range rpm 2 ÷ 130
7. Main AC motor - turning kW 100
8. The maximum torque of the faceplate in
turning mode Nm 105.000
9. Ram vertical stroke (Z axe) mm 1.750
10. Turning ram cross section mm x mm 300x300
11. Horizontal stroke –X axe mm 2.000
12. Feed range (X and Z axe) mm/min 1 ÷ 6000
13. Rapid traverse (X and Z axe) mm/min 8.000
14. Feed motor torque (X and Z axe) Nm 22
18. Vertical stroke of the cross rail mm 2.700

Ppsdpfx Ajtpnlwjfpsp
CNC Equipment
1. Equipment type Fanuc

Overall Dimensions
1. Floor space m 8.5 x 6
2. Max. height of the machine m 8.2
3. Max. height over floor level m 7.4
3. Machine weight to 89

Tool Magazine
1. Number of tool magazines - 1
2. Number of tools/magazine - 16
3. Feed motor torque with encoder Nm 12
4. Tool change time sec. 25
5. Maximum weight of the tool holder
- for turning daN 100
6. Maximum length of the tool holder
- for turning mm 600

Documents

16133426-01.pdf

Seller

Registered since: 2016

10 listings online

Call

Send inquiry

Telephone & Fax

+40 334 4... show

+40 234 5... show

Fax:

These listings may also fit your interest.

Listing

Vertical Turret Lathe - Single Column DÖRRIES VCE 100 S

Germany

7,640 km

Vertical Turret Lathe - Single Column
DÖRRIESVCE 100 S

Call

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine Ppjdjvb Dcaspfx Afpop - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

See details

Listing

Machining center Dörries Pegard Euromill 200

Overath

7,698 km

Machining center
Dörries PegardEuromill 200

Call

Condition: used, Year of construction: 1981, machine/vehicle number: 78.977, Equipment: documentation/manual, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Control: Siemens 840 C Siemens control for X/Y/Z/W/U/B/V axes Spindle diameter: 200 mm Main motor Siemens: 68 kW Spindle speeds: I gear: 3 - 202 rpm II gear: 180 - 808 rpm X travel: 12,000 mm Y travel: 4,500 mm Z travel: 2,400 mm (supporting sleeve □ 520 mm/travel 1200 mm + W axis 1200 mm) Mount: SK60 (SK50) Facing slide: yes Milling head: 2 units Prepared for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Net weight: approx. 140 tons Psdpoqc Umgsfx Afpjpp Video available!

See details

Listing

Cnc lathe Broadbent Heavy Duty Centre Lathe

Rowley Regis

7,060 km

Cnc lathe
BroadbentHeavy Duty Centre Lathe

Call

Condition: ready for operation (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Ppsdpov I T Ewjfx Afpjp Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

See details

Listing

Forging hammers Progresul Braila CM 2500, CM 1250

București

9,243 km

Forging hammers
Progresul BrailaCM 2500, CM 1250

Call

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm Podpfx Aew Sdxasfpjpp - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

See details

Listing

Tönisvorst

7,631 km

Turning steels
Sandvik Coromant

Call

Year of construction: 2015, condition: excellent (used), 10 turning steels Make Sandvik Coromant : 1 : 340 SC5 DCLHR 291311 285 2226 2 : 340 SC5 DCLHR 291311 285 2226 Psdofr T D Tspfx Afpepp 3 : 340 SC5 DCLHR 291311 285 2226 4 :C5-PCLNB-35060-12 Sumitomo 5: PSC50-DDHNL-35060-15 6: C5-PCLNB-35060-12 Sumitomo 7: C5-PCLNB-35060-12 Sumitomo 8: SECO S5-DCLNR-35060-12 9: MPDES26073-105R03C 10 :MPDES 26073-105RO03C Tools are sold individually or as a lot Unit price 80 Euro plus VAT.

See details

Listing

CNC turning and milling center Mori Seiki NL2500

Eschborn

7,828 km

CNC turning and milling center
Mori SeikiNL2500

Call

Listing

Roller lathe WaldrichSiegen 650/10 x 4000

Ahmedabad

13,234 km

Roller lathe
WaldrichSiegen650/10 x 4000

Call

Listing

Vertical Turret Lathe - Single Column DOERRIES CTE 100

Trittau

7,709 km

Vertical Turret Lathe - Single Column
DOERRIESCTE 100

Call

Condition: used, Year of construction: 2013, Year 1978 Retrofit 2013 max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Ppodpfx Afsxmk E Uopjp Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

See details

Listing

Vertical turning lathe Kolomna KU 518 F1 (1532T)

Manlleu

7,933 km

Vertical turning lathe
KolomnaKU 518 F1 (1532T)

Call

Condition: used, Year of construction: 2007, functionality: fully functional, feed length Z-axis: 1,250 mm, turning diameter: 3,200 mm, turning height: 2,000 mm, faceplate diameter: 3,200 mm, DOUBLE RAM VERTICAL CNC LATHE KOLOMNA 1532 T KOLOMNA VERTICAL LATHE Psdpfox Nhm Rex Afpepp • Table Ø 3,200 mm • Maximum turning diameter 3,200 mm • Maximum workpiece height 2,000 mm • Two CNC-controlled rams • Ram travel 1,250 mm • FAGOR 8070 CNC • Motor power 115 kW • Mechanical, hydraulic, electrical, and electronic retrofit new in 2007 • Chip conveyor • Complete enclosure • Cooling system • Work light • Air-conditioned electrical cabinet

See details

Listing

Ahi Evran

9,963 km

Plate rolling machine
DAVIMCO 130

Call

Condition: good (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: MC0 35100, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, roller diameter: 1,000 mm, sheet thickness (max.): 130 mm, sheet thickness steel (max.): 130 mm, total length: 3,500 mm, power: 240 kW (326.31 HP), Technical details Max. bending width: 3,500 mm Max. sheet thickness: 200 mm Total power requirement: 160 kW Smallest roll-in diameter: 770 mm Maximum cylinder pressure: 2 x 2 t Top roll Ø1000 mm Psdpfoyn Agbjx Afpepp Bottom rolls Ø900 mm

See details