REMA circular saw DMLK-30

REMA dmlk 30

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: Blomrmqleg main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: used, Year of construction: 1983, wheel diameter 300 mm total power requirement 2,2 kW weight of the machine ca. 250 t dimensions of the machine ca. 1,2 x 0,6 x 1,5 m Polishing Machine Bn8N2Eup2M2 Drive: 2.2

Year of construction: 1998, Condition: used, Univ. console milling machine REMA type X 6230 serial no. 98307 year of construction 1998 Travel X: 700 mm, Y: 250 mm, Z: 380 mm Table size 1100 x 300 mm Spindle holder ISO 40 Distance spindle nose - table max. 470 mm Pinol movement 55 mm Spindle speed Vertical 45-2000 rpm 12 steps Spindle speed horizontal 32-1600 rpm. 18 steps Feed speed X and Y axis 15 - 1200 mm/min. 18 steps Feed speed Z-axis 5 - 400 mm/min. 18 steps Rapid traverse X and Y-axis 2500 mm/min. Rapid traverse Z-axis 800 mm/min Vertical spindle drive 2.2 kW Horizontal spindle drive 4 kW Feed drive 1.1 kW Mains connection 400 Volt, 50 Hz - 3-axis digital readout SINO, type SDS 6-3V - Vertical milling head can be swiveled manually in two planes with drilling quill - Vertical milling head can be moved manually W-axis = 400 mm (4th axis) - Work table can be rotated +/- 45°, with 4 T-slots 14 mm, spacing 80 mm - Mechanical tool clamping via threaded spindle M16 - Manual central lubrication via hand pump - Coolant device in the machine base - recirculating ball screws - Horizontal milling shaft with counter bearing D7Vy7G0 - Halogen machine light - Switch cabinet fixed to the machine Space requirement L x W x H 2000 x 1700 x 1800 mm Weight 2500 kg Very good condition

Condition: used, 300 mm wheel diameter Bn2Sqr9C9Qg with suction unit from school operation used, top condition make Rema type DS 5/300 max wheel diameter approx. 300 mm x 40 mm x 76 mm base frame machine stand incl. suction unit motor 1.1 kW / 380 V speed 1450 weight approx. 200 kg storage location 97447 Gerolzhofen, free loaded, unpacked handover as seen, without guarantee and warranty

Year of construction: 1988, Condition: good (used), Machine/vehicle number: D 05103, Lg.No. 13439 Technical data: - Polishing wheel- grinding wheel dimension approx. 300 x 40 x 76 mm Ctmclas3Wf - grinding belt dimension approx. 3500 x 50 mm - contact wheel dimension 400 x 50 mm - drive speed 1450 rpm - drive 400 V / 1,8 kW - space requirement approx. W 1100 x H 2450 x D 800 mm - Weight approx. 300 kg

Condition: excellent (used), Rema double grinding head / school machine wheel mass (in mm) 300/40/76 power (in KW): 1,8 Speed (rpm): 1450 Voltage: 380 Volt Bzip9I2Rxd Lamp Shields Location: Ex stock 54634 Bitburg - immediately available -

Year of construction: 1985, Condition: good (used), Machine/vehicle number: D 085014, Offer 22431 Technical data: - Grinding wheel diameter approx. 300 mm - grinding wheel width approx. 40 mm - grinding wheel bore approx. 76 mm - wheel speed 2900 rpm - working height 1100 mm - Original machine stand - drive 400 V / 1,8 kW - space requirement approx. W 800 x H 1150 x D 450 mm - Weight approx. 150 kg Cjw82Qa9H2

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt KZ2050) CNC Mod. Vektor XK 40-13 Ecugyebao KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: excellent (used), Colour: Unknown Field of application: Agriculture Technical condition: very good Visual appearance: very good Rental currency: EUR Please contact Sales Department for more information rotary harrow with closed roller, with scrapers and leveling sheet. = More information = Technical condition: good Visual appearance: good = Dealer information = Our website: You can view this machine on our website for more photos and all technical specifications. Delivery within and outside Europe: Van Gurp can help you with importing and exporting machines. We will happily arrange transport to your location. View machines: Of course it is possible to view the machines on location. We are open 6 days a week, but we advise you to make an appointment in advance. The price shown is subject to change. Also ask about our leasing options. Cccqo0C Trade-in is possible. Van Gurp has a long history since 1903.

Condition: new, Year of construction: 2020, Working width: 3,000 mm, Colour: Unknown Field of application: Agriculture General condition: very good Technical condition: very good Visual appearance: very good Rental currency: EUR Please contact Sales Department for more information Power harrow with multip knife teeth, extra set of change gears and continuous PTO shaft with shear bolts. = More information = Year of manufacture: 2020 CE mark: yes Technical condition: good Visual appearance: good = Dealer information = Our website: You can view this machine on our website for more photos and all technical specifications. Delivery within and outside Europe: Van Gurp can help you with importing and exporting machines. We will happily arrange transport to your location. View machines: Of course it is possible to view the machines on location. We are open 6 days a week, but we advise you to make an appointment in advance. The price shown is subject to change. Also ask about our leasing options. Urpoeom2Rj Trade-in is possible. Van Gurp has a long history since 1903.

Condition: new, Rexroth CSHXMP5/.../ 50/...355A11/B1HXUXD6316 Hydraulic cylinder MNR: R901130316 ,unused with signs of storage, 100% functional, scope of delivery as per photos Gxcx9Hi

Condition: excellent (used), Year of construction: 2022, REMA FX-500 Digital Panel Saw Electromotive setting of the cutting width fence electronic scanner for crosscut fence Electrical blade angle adjustment electrical blade height adjustment 6kw motor undercutter 0.75kw table 3000mm side table 1400mm Price is negotiable Gperc0 Possible shipping at the expense of the buyer

Condition: not inspected (used), Equipment: Type Plate Available, Used condition Uo82J0Gf99

Condition: excellent (used), PART NUMBER 7465 Technical data: - max blade diameter 350mm - blade bore diameter 30mm - max cutting height 100mm - main disc adjustable up/down and at an angle - shield for the disc - with side carriage - cutting length on the carriage 900mm - cutting width at the guide 580mm - 2 types of rotation speed - main motor 4kW - table top dimensions 900x1020mm - diameter of the suction nozzle 110mm - dimensions L/W/H 2200x1400x1000mm - weight 532kg ATTRIBUTES - polish made - with side carriage - used saw, very good condition Net price: 7500 PLN Net price: 1700EUR depending on the price 4,4 EUR (Prices may change with higher fluctuations) Uj9V37Jyc7

Condition: used, Machine/vehicle number: 107147, This REMA double grinder DS07/200, will be auctioned in our insolvency auction - Wolfrum Formenbau GmbH & Co. KG - Machines - Workshop & Office Equipment, online auction. You can find this and many other items on our platform. Gxc2J2Y

Year of construction: 2024, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V Cr3D0Gnrrk - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Year of construction: 2016, Functionality: fully functional, A flexible induction bending machine (Liming Electrical & Machinery Factory) for bending and curving tubes (pipes), box sections, wide flange beams, and channels. This 30” capacity induction bending machine was installed in 2017 at our works in Oldbury in the UK. THE MACHINE CAPACITY: Tube / Pipes From Ø165 up to Ø762 6" up to 30" (USA) Beams (easy way & hard way) IPE 600 & HEB 600 W27 x 178 (USA) Umzut3Uvy2 Box Sections 100 x 100 up to 500 x 500 4" x 4" up to 20" x 20" (USA) Channels UPN 50 up to UPN 400 C6 x 8.2 up to C15 x 50 (USA)

Condition: excellent (used), Year of construction: 2001, Machine is sold due to lack of space, therefore the price of 7500€ net, incl. free loading on truck. Machine is fully functional. Also for sale is a Hurco VMX 50 (price 10.000.-€) Also for sale is a Hurco VSX 24 (price 6.500.-€) Just give us a call if you are interested. Hurco VMX 30 Year of construction 2001 Tool measurement Control system: - Ultimax 4 - Electronic handwheel Travels: - X- 760 , Y- 510 , Z-610mm Main spindle: - Spindle speed max. 10000rpm. - Tool holder SK40 Gxcy0Cu Tool changer: - 24 magazine positions

Condition: as good as new (ex-display), Functionality: fully functional, Year of construction: 2024, Forklift battery with 1-year warranty 80V 4PZS 500AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Year of delivery 2024 Dimensions: 1025 x 708 x 627 mm Weight: approx. 1,215 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Suitable for the following models and more: Behdlxy Linde E 16 P - 386-02 - lateral change Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLACH - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - lateral change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - lateral change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical changeover Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - lateral change Linde P 250 SWB - 5007-10 - vertical changeover Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical change Linde W 20 - 127-06 - change from above Linde W 20 - 5007-10 - lateral change Linde V 20 - 5007-10 - vertical changeover Linde W 30 - 5007-10 - lateral changeover Linde W 30 - 5007-10 - vertical change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 All common battery sizes available

Condition: excellent (used), CATALOG NO. 7026 TECHNICAL DATA - inlet width 740mm - inlet height 300mm - roller width 780mm - shaft diameter 1000mm - knife length 780mm - number of knives 2 pcs - sieve dimensions 55x55mm - 4 toothed pulling rollers from the bottom - lower shaft motor 5.5 kW - 3 toothed pulling shafts from above - upper shaft motor 5.5 kW - belt feeder - length of the conveyor belt 4300mm - width of the conveyor belt 600mm - 2.2 kW tape feed motor - main engine 90kW - reverse gear, - auto reverse - overall dimensions of the machine length/width/height 4600x2350x1700mm - total dimensions of the feeder length/width/height 4550x980x970mm - total weight about 11000 kg – German production, – used chipper, very good condition Bor37Vgpjx Net price: PLN 295900 Net price: EUR 67250 Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2013, TETRA PAK APPLICATOR CAP 30, HELICAP 27, 1000 PRISMA YOM 2013 Hwrw2Qbzl VERSION 300 14,000 RUNNING HOURS EXCELLENT CONDITION CAN BE CONVERTED TO HeliCap 23 Pro or HeliCap26 Pro

Year of construction: 2024, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Fzf7Cbk Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: as good as new (ex-display), Functionality: fully functional, Year of construction: 2024, Forklift battery with 1-year warranty 80V 5PZS 775AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Year of delivery 2024 Dimensions: 1,025 x 852 x 784 mm Weight: approx. 1,871 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 High-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30 /600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30 /600 S-336-00 Linde E30 H -387 -00/ High Linde E30P - 325-00 Linde E30 SH -1276-00 Linde E35/600H - 388-00 Linde E35 H-/HL - 387-00 Linde E35 P - 337-00 Linde E35 RHL - 387-00 Linde E35 SH-1276-00 Linde E40 - 337-00 Linde E40 C - 388-00 Linde E40 P - 337-00 Linde E45 /C/ 600H - 388-00 Linde K 5231-00 /side Linde P250 - 127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Crown TSP 6000-C/-D Crown TSP 7000 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB 35N Dptht2 Nissan QX30 Capricorn Boss PE30D TCM FHB25-E1L Yale ERP 30VL and others. All common battery sizes available, please enquire.

Year of construction: 2024, Operating hours: 10 h, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Ujzugbbob7 Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: autofocus system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: as good as new (ex-display), Functionality: fully functional, Year of construction: 2024, Forklift battery with 1-year warranty 80V 5PZS 700AH REMA 320 A plug installed - alternative plugs can be converted by arrangement incl. Aquamatik for automatic filling of the cells with distilled water Year of delivery 2024 Dimensions: 1,028 x 855 x 784 mm Weight: approx. 1,860 kg Capacity: min. 90-100% (C5 protocol is enclosed with delivery) Linde E25-325-00 Linde E25/600-336-00 Caporbsgm Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 High-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30 /600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30 /600 S-336-00 Linde E30 H -387 -00/ High Linde E30P - 325-00 Linde E30 SH -1276-00 Linde E35/600H - 388-00 Linde E35 H-/HL - 387-00 Linde E35 P - 337-00 Linde E35 RHL - 387-00 Linde E35 SH-1276-00 Linde E40 - 337-00 Linde E40 C - 388-00 Linde E40 P - 337-00 Linde E45 / 600H - 388-00 Linde K 12/15-148-00 Linde P250 - 127-00 Linde P250L -127-05 Jungheinrich EFG 430 Toyota 7FBMF30/35 Toyota 8FBMT25 Crown TSP 6000-C Crown TSP 7000 Caterpillar EP30K/FB35KPAC Daewoo B30-35X Daewoo B35X-7 Hyundai 50B-9 Mitsubishi FB25N UniCarriers QX 2-30 and others. All common battery sizes available, please enquire.