Spiral hose set ID 9 mm - 25.8 m / 1 pc - 25.8 m

Riegler

Condition: new, Spiral hose set, ID 8mm, OD 12mm, L. 6m, connector DN 7.2, G 3/8 inch, Rl. RIEGLER · Polyurethane · with rotatable connector and kink protection spring · extremely flexible and kink-resistant · operating temperature from -40 to +74 °C · max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar retraction force to the conventional nylon spiral hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. This reduces the risk of scratching painted or sensitive surfaces. · Further technical characteristics: Temperature range: -20 to +60°C · Physical state: Gaseous Outer coil diameter: 80 mm Hose diameter: 12.0 x 8.0 mm Operating pressure: 9 bar Operating temperature: -40 to +74 °C Lrjdpfo Ab Rqwjx Amzou Connection thread, inch: G 3/8 ? Connection thread, mm: 9.5 mm Working length: 6.0 m

Condition: new, Spiral hose set, ID 6.5 mm, OD 10 mm, L 7.5 m, connector DN 7.2, G 1/4 inch, Rl. RIEGLER · Polyurethane · with rotatable coupling and kink protection spring · extremely flexible and kink-resistant · operating temperature from -40 to +74 °C · max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar restoring force as the conventional nylon spiral hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. This reduces the risk of scratching painted or sensitive surfaces. · Further technical properties: temperature range: -20 to +60°C · physical state: gaseous outer coil diameter: 60 mm Lrjdpfxe Ab Rqqe Amzju operating pressure: 10 bar connector thread, inch: G 1/4 ? connector thread, mm: 6.4 mm working length: 7.5 m operating temperature: -40 to +74 °C hose diameter: 9.5 x 6.3 mm

Condition: new, MULTIFIX maintenance unit, Gew.G 1/2 inch, HA BG III, 2-part, 3500 l/min, B.134.8 mm, RIEGLER · Two-part maintenance unit consisting of a pre-pressure-independent, back-pressure-controlled membrane pressure regulator with secondary venting, in combination with a centrifugal separator and a proportional oiler. · With polycarbonate container. · Internal thread. · Sealing material: NBR. · Also available with protective basket or metal container upon request. · Suitable pneumatic special oil, item no. 4588 881 014. · Other technical characteristics: A: 134.8 mm · C: 99 mm · D: 147.3 mm · Drain valve: semi-automatic. · B: 246.3 mm Housing: Zinc die-cast (aluminum in the G 25 mm/1 inch version) Drip attachment: PA (plastic container), zinc-glass-NBR (metal container) Sealing material: NBR Flow rate: 3550 l/min Lrjdpfx Aj Ab Rqksmzsu Filter fineness: 5 (BG 1 / BG 2), 40 (BG 3) µm Medium temperature: max. +60 °C DN: 15 Oil dosage at qv 1000: 1-2 drops/min (approximate value) l/min Control range: 0.5 - 10 bar Ambient temperature: max. +60 °C Inlet pressure (metal container): max. 20 bar Drain valve: semi-automatic (HA) Flow rate measurement: at P1 = 8, P2 = 6 and pressure drop Δp = 1 bar Thread G (inch): 1/2 inch Inlet pressure (plastic container): max. 16 bar Thread G mm: 13 mm Model: BG II Spring cap: POM brass

Condition: new, Maintenance unit MULTIFIX, G 3/8 inch, HA BG I, 2-piece, 1100 l/min, B 92.8 mm, RIEGLER Lrjdpo Ab Rqdefx Amzeu * Two-piece maintenance unit consisting of a pressure regulator with secondary venting, independent of inlet pressure and with reverse flow control, in combination with a centrifugal separator and a proportional oiler. * With polycarbonate container. * Internal thread. * Sealing material: NBR. * Available on request with protective basket or metal container. * Suitable pneumatic special oil, article no. 4588 881 014. * Further technical characteristics: A: 92.8 mm * C: 67 mm * D: 125.1 mm * Drain valve: semi-automatic * B: 192.1 mm DN: 10 Housing: Zinc die-cast (aluminum for G 25 mm / 1 inch version) Thread G mm: 10 mm Flow rate: 1150 l/min Filter fineness: 5 (BG 1 / BG 2), 40 (BG 3) µm Thread G (inch): 3/8 inch Medium temperature: max. +60 °C Inlet pressure (metal container): max. 20 bar Control range: 0.5 - 10 bar Inlet pressure (plastic container): max. 16 bar Model: BG I Oil dosage at qv 1000: 1-2 drops/min (approximate value) l/min Flow rate measurement: at P1 = 8, P2 = 6 and pressure drop Δp = 1 bar Sealing material: NBR Drip nozzle: PA (plastic container), zinc-glass-NBR (metal container) Spring cap: POM-brass Ambient temperature: max. +60 °C Drain valve: semi-automatic (HA)

Condition: new, Filter regulator MULTIFIX 24.66 BG III G 3/4 inch 0.5-10 bar 3500 l/min RIEGLER · Pressure regulator with a membrane, independent of inlet pressure and with secondary venting, in combination with a centrifugal separator. · The pressure setting can be locked by pressing the handwheel. · With a polycarbonate container and a pressure gauge. · Internal thread. · Also available on request with a different control range, with a protective basket or a metal container, and with a locking mechanism. · Other technical specifications: · A: 68.8 mm · C: 99 mm · D: 147.3 mm · Spring cap: POM brass · B: 246.3 mm · Sealing material: NBR Flow rate: 5000 l/min DN: 20 Filter fineness: 5 (40 C 55) µm Thread G mm: 19 mm Control range: 0.5 - 10 bar Nominal size: DN 20 mm Drain valve: semi-automatic (HA) Thread G (inch): 3/4 ? Inlet pressure (metal container): max. 20 bar Sealing material: NBR Spring cap: POM brass Flow rate measurement: at P1 = 8, P2 = 6 and pressure drop Δp = 1 bar Ambient temperature: max. +60 °C Housing: zinc die-cast (aluminum for 25 mm (G 1")) Inlet pressure (plastic container): max. 16 bar Lrodj Ab Rp Tjpfx Amzsu Medium temperature: max. +60 °C

Condition: new, Filter regulator MULTIFIX 19.17 BG III G 1/2 inch 0.5-10 bar 3500 l/min RIEGLER · Pressure regulator with a diaphragm, independent of inlet pressure and with secondary venting, in combination with a centrifugal separator. · The pressure setting can be locked by pressing the handwheel. · With polycarbonate container and pressure gauge. · Internal thread. · Also available on request with a different control range, with a protective basket or metal container, and lockable. · Further technical characteristics: A: 68.8 mm · C: 99 mm · D: 147.3 mm · Spring cap: POM brass · B: 246.3 mm · Sealing material: NBR Filter fineness: 5 (40 C 55) µm Medium temperature: max. +60 °C Housing: Zinc die-cast (aluminum for 25 mm (G 1")) Thread G mm: 13 mm Ledpfe Ab Rp Hox Amzjru Drain valve: semi-automatic (HA) Nominal size: DN 15 mm Ambient temperature: max. +60 °C Inlet pressure (metal container): max. 20 bar Sealing material: NBR Spring cap: POM brass Flow rate: 5000 l/min DN: 15 Inlet pressure (plastic container): max. 16 bar Control range: 0.5 - 10 bar Thread G (inch): 1/2 ? Flow rate measurement: at P1 = 8, P2 = 6 and pressure drop Δp = 1 bar

Condition: new, Handheld tire inflation gauge, standard model, with gas station connector, calibrated, DN 7.2, RIEGLER · Standard model · Robust standard handheld tire inflation gauge with fully rubberized protective cover · Pressure gauge with bar and psi display · Hose length: 50 cm Lodpfo Ab Rpyox Amzeru · Hose connection G 1/4, rotatable The calibration period begins on the day the product is placed on the market or calibrated. It ends (if the calibration period is one year or longer) at the end of the year in which the period mathematically ends. Model: with gas station connector, calibrated Measuring range bar: 0 to 12 Connector nozzle DN: NW 7.2

Condition: new, Hand tire inflation gauge, standard model with lever connector, calibrated, DN 7.2, RIEGLER · Standard model · Robust standard hand tire inflation gauge with fully rubberized protective housing · Pressure gauge with bar and psi display · Hose length: 50 cm · Hose connection G 1/4, rotatable The calibration period begins on the day the product is placed on the market or calibrated. It ends (if the calibration period is one year or longer) at the end of the year in which the period mathematically ends. Measuring range bar: 0 to 12 Connector nipple DN: NW 7.2 Lredpfx As Ab Rptomzeu Model: with lever connector, calibrated

Condition: new, Hand tire pressure gauge, standard version with quick-connect coupling, calibrated, DN 7.2, RIEGLER Ledpo Ab Rpmjfx Amzeru · Standard version · Robust standard hand tire pressure gauge with a fully rubberized protective cover · Pressure gauge with bar and psi display · Hose length: 50 cm · Hose connection G 1/4, rotatable The calibration period begins on the date of placing the product on the market or the date of calibration. It ends (if the calibration period is greater than or equal to 1 year) at the end of the year in which the period mathematically ends. Version: with quick-connect coupling, calibrated Measuring range bar: 0 to 12 Connection nipple DN: NW 7.2

Condition: new, Coiled hose set, ID 8mm, OD 12mm, L.10m, PU, 7.4, Rl.RIEGLER · Polyurethane · With rotatable connector and kink protection spring · Extremely flexible and kink-resistant · Operating temperature from -40 to +74 °C Ljdpfxj Ab Rpgs Amzsru · Max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar retraction force to the conventional nylon coiled hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. The risk of scratching painted or sensitive surfaces is therefore reduced. · Further technical properties: Physical state: Gaseous Working length: 10.0 m Hose diameter: 12.0 x 8.0 mm Outer coil diameter: 80 mm Operating pressure: 9 bar