Filter regulator MULTIFIX 24.66 - 1 pc

Riegler

Condition: new, Spiral hose set, ID 8mm, OD 12mm, L. 6m, connector DN 7.2, G 3/8 inch, Rl. RIEGLER · Polyurethane Lhodpfx Amj Ab Rqwszon · with rotatable connector and kink protection spring · extremely flexible and kink-resistant · operating temperature from -40 to +74 °C · max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar retraction force to the conventional nylon spiral hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. This reduces the risk of scratching painted or sensitive surfaces. · Further technical characteristics: Temperature range: -20 to +60°C · Physical state: Gaseous Outer coil diameter: 80 mm Hose diameter: 12.0 x 8.0 mm Operating pressure: 9 bar Operating temperature: -40 to +74 °C Connection thread, inch: G 3/8 ? Connection thread, mm: 9.5 mm Working length: 6.0 m

Condition: new, Spiral hose set, ID 6.5 mm, OD 10 mm, L 7.5 m, connector DN 7.2, G 1/4 inch, Rl. RIEGLER · Polyurethane · with rotatable coupling and kink protection spring · extremely flexible and kink-resistant · operating temperature from -40 to +74 °C · max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar restoring force as the conventional nylon spiral hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. This reduces the risk of scratching painted or sensitive surfaces. · Further technical properties: temperature range: -20 to +60°C · physical state: gaseous outer coil diameter: 60 mm operating pressure: 10 bar connector thread, inch: G 1/4 ? Ljdpfx Ao Ab Rqqomzehn connector thread, mm: 6.4 mm working length: 7.5 m operating temperature: -40 to +74 °C hose diameter: 9.5 x 6.3 mm

Condition: new, MULTIFIX maintenance unit, Gew.G 1/2 inch, HA BG III, 2-part, 3500 l/min, B.134.8 mm, RIEGLER Lodpfxo Ab Rqko Amzohn · Two-part maintenance unit consisting of a pre-pressure-independent, back-pressure-controlled membrane pressure regulator with secondary venting, in combination with a centrifugal separator and a proportional oiler. · With polycarbonate container. · Internal thread. · Sealing material: NBR. · Also available with protective basket or metal container upon request. · Suitable pneumatic special oil, item no. 4588 881 014. · Other technical characteristics: A: 134.8 mm · C: 99 mm · D: 147.3 mm · Drain valve: semi-automatic. · B: 246.3 mm Housing: Zinc die-cast (aluminum in the G 25 mm/1 inch version) Drip attachment: PA (plastic container), zinc-glass-NBR (metal container) Sealing material: NBR Flow rate: 3550 l/min Filter fineness: 5 (BG 1 / BG 2), 40 (BG 3) µm Medium temperature: max. +60 °C DN: 15 Oil dosage at qv 1000: 1-2 drops/min (approximate value) l/min Control range: 0.5 - 10 bar Ambient temperature: max. +60 °C Inlet pressure (metal container): max. 20 bar Drain valve: semi-automatic (HA) Flow rate measurement: at P1 = 8, P2 = 6 and pressure drop Δp = 1 bar Thread G (inch): 1/2 inch Inlet pressure (plastic container): max. 16 bar Thread G mm: 13 mm Model: BG II Spring cap: POM brass

Condition: new, Maintenance unit MULTIFIX, G 3/8 inch, HA BG I, 2-piece, 1100 l/min, B 92.8 mm, RIEGLER * Two-piece maintenance unit consisting of a pressure regulator with secondary venting, independent of inlet pressure and with reverse flow control, in combination with a centrifugal separator and a proportional oiler. * With polycarbonate container. * Internal thread. * Sealing material: NBR. * Available on request with protective basket or metal container. * Suitable pneumatic special oil, article no. 4588 881 014. * Further technical characteristics: A: 92.8 mm * C: 67 mm * D: 125.1 mm * Drain valve: semi-automatic * B: 192.1 mm DN: 10 Housing: Zinc die-cast (aluminum for G 25 mm / 1 inch version) Thread G mm: 10 mm Flow rate: 1150 l/min Filter fineness: 5 (BG 1 / BG 2), 40 (BG 3) µm Thread G (inch): 3/8 inch Medium temperature: max. +60 °C Inlet pressure (metal container): max. 20 bar Control range: 0.5 - 10 bar Inlet pressure (plastic container): max. 16 bar Lhsdpfxs Ab Rqds Amzsn Model: BG I Oil dosage at qv 1000: 1-2 drops/min (approximate value) l/min Flow rate measurement: at P1 = 8, P2 = 6 and pressure drop Δp = 1 bar Sealing material: NBR Drip nozzle: PA (plastic container), zinc-glass-NBR (metal container) Spring cap: POM-brass Ambient temperature: max. +60 °C Drain valve: semi-automatic (HA)

Condition: new, Filter regulator MULTIFIX 19.17 BG III G 1/2 inch 0.5-10 bar 3500 l/min RIEGLER · Pressure regulator with a diaphragm, independent of inlet pressure and with secondary venting, in combination with a centrifugal separator. · The pressure setting can be locked by pressing the handwheel. · With polycarbonate container and pressure gauge. · Internal thread. · Also available on request with a different control range, with a protective basket or metal container, and lockable. · Further technical characteristics: A: 68.8 mm · C: 99 mm · D: 147.3 mm · Spring cap: POM brass · B: 246.3 mm Lhede Ab Rp Hspfx Amzen · Sealing material: NBR Filter fineness: 5 (40 C 55) µm Medium temperature: max. +60 °C Housing: Zinc die-cast (aluminum for 25 mm (G 1")) Thread G mm: 13 mm Drain valve: semi-automatic (HA) Nominal size: DN 15 mm Ambient temperature: max. +60 °C Inlet pressure (metal container): max. 20 bar Sealing material: NBR Spring cap: POM brass Flow rate: 5000 l/min DN: 15 Inlet pressure (plastic container): max. 16 bar Control range: 0.5 - 10 bar Thread G (inch): 1/2 ? Flow rate measurement: at P1 = 8, P2 = 6 and pressure drop Δp = 1 bar

Condition: new, Handheld tire inflation gauge, standard model, with gas station connector, calibrated, DN 7.2, RIEGLER Lsdpfxe Ab Rpyj Amzjhn · Standard model · Robust standard handheld tire inflation gauge with fully rubberized protective cover · Pressure gauge with bar and psi display · Hose length: 50 cm · Hose connection G 1/4, rotatable The calibration period begins on the day the product is placed on the market or calibrated. It ends (if the calibration period is one year or longer) at the end of the year in which the period mathematically ends. Model: with gas station connector, calibrated Measuring range bar: 0 to 12 Connector nozzle DN: NW 7.2

Condition: new, Hand tire inflation gauge, standard model with lever connector, calibrated, DN 7.2, RIEGLER · Standard model · Robust standard hand tire inflation gauge with fully rubberized protective housing · Pressure gauge with bar and psi display · Hose length: 50 cm · Hose connection G 1/4, rotatable The calibration period begins on the day the product is placed on the market or calibrated. It ends (if the calibration period is one year or longer) at the end of the year in which the period mathematically ends. Lhedpfs Ab Rptex Amzon Measuring range bar: 0 to 12 Connector nipple DN: NW 7.2 Model: with lever connector, calibrated

Condition: new, Hand tire pressure gauge, standard version with quick-connect coupling, calibrated, DN 7.2, RIEGLER · Standard version · Robust standard hand tire pressure gauge with a fully rubberized protective cover · Pressure gauge with bar and psi display · Hose length: 50 cm · Hose connection G 1/4, rotatable The calibration period begins on the date of placing the product on the market or the date of calibration. It ends (if the calibration period is greater than or equal to 1 year) at the end of the year in which the period mathematically ends. Version: with quick-connect coupling, calibrated Lhsdpfe Ab Rpmex Amzjn Measuring range bar: 0 to 12 Connection nipple DN: NW 7.2

Condition: new, Coiled hose set, ID 8mm, OD 12mm, L.10m, PU, 7.4, Rl.RIEGLER · Polyurethane · With rotatable connector and kink protection spring · Extremely flexible and kink-resistant · Operating temperature from -40 to +74 °C · Max. operating pressure: 10 bar at 23 °C · The highly elastic polyurethane hose has a similar retraction force to the conventional nylon coiled hose, but is less prone to forming kinks and has a significantly higher abrasion resistance. The risk of scratching painted or sensitive surfaces is therefore reduced. · Further technical properties: Physical state: Gaseous Working length: 10.0 m Hose diameter: 12.0 x 8.0 mm Lhsdo Ab Rpgepfx Amzsn Outer coil diameter: 80 mm Operating pressure: 9 bar

Condition: new, Coiled hose set, ID 8mm, OD 12mm, L.6m, PU, 7.4 coils, RIEGLER * Polyurethane * with rotatable fitting and kink protection spring * extremely flexible and kink-resistant * operating temperature from -40 to +74 °C * max. operating pressure: 10 bar at 23 °C * The highly elastic polyurethane hose has a similar retraction force as the conventional nylon coiled hose, but is less prone to kinking and has a significantly higher abrasion resistance. This reduces the risk of scratching painted or sensitive surfaces. * Other technical properties: physical state: gaseous outer coil diameter: 80 mm working length: 6.0 m Lhsdpfj Ab Rpaox Amzsn hose diameter: 12.0 x 8.0 mm operating pressure: 9 bar