RISO CC9150

Riso CC9150

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Very well-maintained machine. Only 130,000 cuts. Itjdpfx Abjzlr Nxoyek

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation Itedpevdtxiofx Abyok - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. Ijdpfxjtk It Ss Abystk For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: excellent (used), Year of construction: 2004, Conveying and dosing equipment Brand: A. Tschritter Type: WC 100 Year of manufacture: 2004 Itodpsd Twgcjfx Abysk

Condition: good (used), Year of construction: 2015, Folding machine Horizon MT/PF-40L, serial number 008002, two folding pockets, pre-programmed jobs, electrically operated pockets, in good condition, immediately available. Technical data: Maximum format: 320x630 mm Minimum format: 125x128 mm Paper weight: 40–160 g/m² Speed: 23,000 cycles/h 2 parallel cassettes Ijdpfxsx S Etae Abystk 230V power supply Electrically controlled delivery unit Counter with batch function Infinitely variable speed and feed adjustment High pile feeder Soundproof enclosures on all units and cassettes Documentation

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, Polar 66 paper cutting machine, manufactured in 2000, machine number 70H1275, with programmable control and light barriers, in good condition, available immediately. Itjdozivdnopfx Abyjk If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment.

Condition: excellent (used), Year of construction: 1998, machine/vehicle number: 68H1255, Format (cm): 66 Equipment / Additional information: Safety barriers, 1xreserve knife Ijdpfsy T I Hrex Abyetk Very good condition // The screen has pixel error, but this does not affect its functionality.

Condition: used, The Nagel Multinak S is a stitching machine designed for efficient and precise stitching tasks. Currently in storage and located in Germany, this model is available for transport under FCA delivery terms. With its double stitching heads and magazine stitcher, it offers high productivity and versatility in handling various stitching requirements. Format: Equipment: double stitching heads Itjdpfx Aovfx Sqebyok magazine binder

Condition: ready for operation (used), Konica Minolta AccurioPrint C 4080 with 3.1 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 - PF 707m - FS 532 - RU 518 - VI 514 Iedjzh Hyqspfx Abyjtk - IQ 501 - Fiery IC 419 As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet/container shipping to ensure our customers receive machines in perfect condition. Our company offers the widest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Konica Minolta Accurio Press C 4080 with a print run of 7 million copies. Equipped with: FS 532 RU 518 m PF 707m IC 609 As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet shipping to ensure that our customers receive machines in perfect condition. We ship copiers that originate from and are maintained by Konica Minolta France. If you have any questions, please do not hesitate to ask. Isdpfozadfvox Abyjtk Our company offers the widest range of Konica Minolta production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.