Powder coating equipment

ROMER/ Electrostatic painting SL

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Hnodpjfz U Nbefx Ahuog 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sec grinding width 75 x 430 mm engine output 3.0 kW weight 75.0 kg including machine base Furnishing: - Powerful belt sander - modularly expandable, for the trade and for small series. - Can be expanded with additional modules - Speeds ideal for metalworking with 3000 / min - Height-adjustable surface grinding table for linear surface grinding - Removable chip catcher - Connection option for external suction - Working height individually adjustable Hjdpfxjxabaij Ahusng - Patented strap tensioning system - Robust three-phase motor - Low vibration

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Hodpfx Ahsxwmugeueng Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: used, mileage: 539,225 km, power: 265 kW (360.30 HP), first registration: 12/2014, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Equipment: air conditioning, had accident, MAN TGX 18.360 - Accident vehicle - Engine runs - Transmission runs - Full air suspension - Retarder - Unladen weight: 8,079 kg - Front axle tyres: 355/50 R22.5 - Rear axle tyres: 295/55 R22.5 Errors and intermediate sale excepted. Internal vehicle number: 1278 WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp WhatsApp Hnsdpfewqn Dlox Ahujg

Year of construction: 1971, condition: used, machine/vehicle number: 23964, disk of circular saw-Ø: 370 mm Hnedecu Dvujpfx Ahueg cutting area at 90°: 115 mm cutting area at 45°: 115 mm engine: 380 V, 4/5 kW space needed: 1000 x 1200/2200 x 1500 mm weight: ca. 900 kg

Condition: excellent (used), mileage: 49,751 km, power: 105 kW (142.76 HP), first registration: 07/2020, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, color: red, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: steel, total length: 6,300 mm, total width: 2,080 mm, total height: 2,460 mm, loading space length: 3,030 mm, loading space width: 2,020 mm, loading space height: 400 mm, Year of construction: 2020, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, power assisted steering, power mirror, soot filter, traction control, trailer coupling, General information Hedowc Dymspfx Ahujng Cab: single Registration number: 078299 Technical information Engine capacity: 2.143 cc Axle configuration Tyre size: 195/75R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1850 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Double wheels; Max. axle load: 2300 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 3.227 kg Carrying capacity: 273 kg GVW: 3.500 kg Max. towing weight: 3.500 kg (unbraked 750 kg) Functional Make of bodywork: SCATTOLINI CABRETA Height of cargo floor: 110 cm Tipper: Back Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Additional information Please contact Moussa or Youssef for more information VIDEO: Very nice and neat 3x pieces on stock Mercedes Sprinter 514 CDI 2.2 143 hp Euro 6 Rear tipper Scattolini Cabreta Internal dimensions: L. 303 / W. 202 / H. 40 cm 61000 KM Fully dealer maintained GVW 3500 KG (Driving license B) Towing weight 3500 KG Technically and optically in very good condition

Condition: new, Year of construction: 2025, machine/vehicle number: 20241119019, fuel type: diesel, motor manufacturer: Perkins 1706A-E93TAG1, General information Field of application: Construction Hsdpfxsx Nl D Te Ahusng Weights Empty weight: 2.950 kg Functional Generator capacity: 330 kVA CE mark: yes Other information Fuel consumption: 48.1 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A46F Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 385 l Transport dimensions (LxWxH): 3,85x1,3x1,97 Additional information Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information

Condition: new, TECHNICAL DATA: - Footprint: 15,000 x 24,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particle board (P6 raw/white) - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms are expandable in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Hsdpfexpizajx Ahujng Delivery scope: - Columns - Primary and secondary beams - Bracing crossbars - Flooring panels - Fastening materials PRICES: Variant I: Footprint: 30 m² | Area: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Footprint: 60 m² | Area: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Footprint: 60 m² | Area: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Footprint: 90 m² | Area: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Footprint: 120 m² | Area: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Footprint: 180 m² | Area: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Footprint: 240 m² | Area: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Collision guard YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we design and manufacture your storage platform exactly according to your requirements – tailored to surface area, load capacity, installation height and intended area of use. Based on your specifications, our design department will prepare an individual, non-binding offer for you. Whether new construction, expansion or modernization of existing systems – we support you with expert know-how and practical solutions. TRANSPORT & INSTALLATION We are happy to assist with the transport and installation of the goods. This item is available for collection. Delivery or shipping is available for an additional charge. Additional costs depend on the delivery location and volume of the shipment and can be quoted individually on request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The stated price is per unit/net, or as specified in description (plus VAT). You will of course receive an invoice with VAT indicated. ABOUT US The company DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machines for trade, industry and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four wins – The building blocks of success at DLK – Storage Technology | Levelmaker® | Logistics | Solutions