Used Hurco for sale (162)

Condition: used, Hurco VM30 Vertical Machining Centre. New 2012 Specifications: Cgjdpex Rkyvjfx Ah Sel X: 50" Y: 20" Z: 20" Power: 20 hp RPM: 10,000 RPM # ATC: 20 Table-W: 52" Table-L: 18"

Condition: used, Year of construction: 2002, x-travel 1.060 mm y-travel 610 mm z-travel 610 mm control Winmax 9 (Upgrade) table-size 1.270 x 610 mm max. table load 1.100 kg number of T-slots 5 T-slot - width 18 mm T-slot - distance 100 mm turning speed range - milling ~ 10.000 U/min power capacity - milling spindle 18 / 11 kW tool taper SK 40 Tool changer 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool length 300 mm max. tool weight 7 kg feed ~ 15,4 m/min rapid traverse X-axis 30 m/min rapid traverse Y-axis 30 m/min Cgsdpfx Ahsx R Enhe Sel rapid traverse Z-axis 20 m/min weight of the machine ca. 7,0 t dimensions of the machine ca. 3,5 x 3,2 x 3 m Machining Center - Vertical HURCO VMX 42

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 640 mm, Ultimax control BT 40 spindle, new in 2020 speed 10,000 rpm Csdpfxsxu Ikqo Ah Ssgl travels 1270X660X640 mm 24-tool changer chip conveyor

Condition: good (used), Year of construction: 2014, operating hours: 9,554 h, functionality: fully functional, machine/vehicle number: SL8-1620455DJAAH, turning diameter over cross slide: 300 mm, turning diameter: 256 mm, spindle speed (max.): 4,800 rpm, travel distance X-axis: 198 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 6,000 mm, total width: 2,200 mm, feed rate X-axis: 19 m/min, feed rate Z-axis: 24 m/min, overall weight: 5,500 kg, bar passage: 50 mm, bar diameter (max.): 32 mm, controller manufacturer: HURCO, controller model: MAX, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, operating hours of spindle: 2,027 h, HURCO TMM8i CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 40 A - Connection: 28 kW - Max. swing diameter: 525 mm - Max. diameter over cross slide: 300 mm - Chuck diameter: 200 mm - Acceleration: 0 - 3000 rpm - Turret type: VDI 30 Cgsdpfxoxw Sr Dj Ah Sol - With a total of 12 stations - Max. spindle speed: 5000 rpm - Indexing time: 0.23 sec - Max. boring bar diameter: 32 mm - Tool shank cross-section: 19 mm - Including powered tool stations The machine is equipped with a bar feeder from BREUNING, type: ILS MUK 7012-III, year of manufacture: 2017. Also included are a chip conveyor, tailstock, and a three-jaw chuck with a diameter of 200 mm. Attention: The item must be collected firmly and bindingly between 19.01.2026 and 23.01.2026 on a date to be agreed. FCA D-76571 Gaggenau – loaded on truck.

Condition: used, Year of construction: 2006, Offer, subject to change: 1 used vertical machining center Manufacturer: Hurco, Type VM1, Serial number H-V12319, Year of manufacture: 2000 Control: ULTIMAX 4 Table dimensions: 762 x 356 mm Csdpfx Ahewl H Rmj Segl X travel: 660 mm Y travel: 356 mm Z travel: 456 mm Spindle speed range: 10 – 10,000 rpm Tool changer: 20-station SK40 tool holder Rapid traverse rates X/Y/Z: 28 m/min Drive power: 11 kW Space requirement: L x W x H: 2,000 x 1,800 x 2,600 mm Weight: approx. 2,900 kg

Condition: excellent (used), Year of construction: 2011, Hurco VMX60SR 5 Axis CNC Vertical Machining Centre With Hurco Winmax Dual Screen Control Table Dimension 1,670 x 660mm (5 'T' Slots). Rotary Table Dimension Ø610mm (5 'T' Slots). Axis Travel 'X'=1,525mm, 'Y'=660mm, 'Z'=610mm, 'B'=0-92°, 'C'=360°. Maximum Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. S/No: S374F2210122DFDCH (2011). With Spindle Inspection Probe, Renishaw Toolsetter, Coolant System, Chip Conveyor, Filtermist FX7002 Mist Extraction Unit, Wash Gun, Handwheel, Signal Tower. Please View Last Service Report 27/05/2025 (Attached). Note: Spindle Tooling & Vices Not Included. Cgsdpjx H Tbbofx Ah Sel

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine Cedpfox N E H Usx Ah Segl

Condition: used, operating hours: 10,973 h, travel distance X-axis: 533 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 483 mm, controller manufacturer: Winmax, Space requirement approx. 2500 x 2300 x 2800 mm Cedsx Niw Djpfx Ah Segl

Condition: not inspected (used), Year of construction: 1999, feed length X-axis: 760 mm, feed length Y-axis: 430 mm, feed length Z-axis: 500 mm, Ultimax 3 with 4th axis BT 40 spindle 8000 rpm spindle speed Cedpfxevgbrvo Ah Sogl 760x430x500mm stroke 24-tool changer 860x508mm table

Condition: good (used), Year of construction: 2012, operating hours: 25,913 h, functionality: fully functional, machine/vehicle number: M542-1620392JLCS, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: HURCO, controller model: WINMAX, total height: 3,300 mm, total length: 4,500 mm, total width: 3,500 mm, table width: 660 mm, table length: 1,500 mm, table load: 1,350 kg, overall weight: 12,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, tool diameter: 80 mm, tool weight: 7,000 g, input voltage: 400 V, groove spacing: 100 mm, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, Equipment: chip conveyor, HURCO VMX 50 T CNC Vertical Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 30 A - Distance spindle nose to table: 150-760 mm - Table with 6 T-slots - T-slot spacing: 100 mm - T-slot width: 18 mm IMPORTANT: Note: The clamping systems currently located on the table surface are not included in the scope of delivery! - Feed rate: 3 - 15,200 mm/min - Tool holder: SK 40 - Tool diameter fully loaded: 80 mm, with free adjacent places: 120 mm - Max. tool length: 300 mm - Max. total weight: 82 kg - Including chip conveyor Codpfx Aoxw S Ileh Sjgl Note: The item must be collected on a binding date to be agreed, between 19 and 23 January 2026. FCA D-76571 Gaggenau – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (max.): 10,000 rpm, power: 15 kW (20.39 HP), Equipment: documentation/manual, rotational speed infinitely variable, - 5-Axis Vertical Machining Center - second-hand - HURCO - VMX 40 - with LEHMANN 2-axis dividing head - DRM 160mm, holder SK 50 - 24-fold tool changer - Control ULTIMAX 4 (64MB memory with all extensions, 5-axis simultaneous possible) - Ethernet interface - Zero-point clamping system Cgjdpfxoq Sr Huj Ah Ssl - Coolant system (without chip conveyor, no IKZ)

Condition: used, Year of construction: 2005, Description Longitudinal travel X 1060 mm Cross travel Y 610 mm Vertical travel Z 610 mm CNC HURCO ULTIMAX 4 Table length 1270 mm Table width 610 mm Maximum table load 500 kg Tool magazine 24 positions Cedpfx Ajx Rc Uloh Sogl Spindle taper SK 40 Maximum spindle speed 15000 rpm Chip conveyor READY FOR DELIVERY!!

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2400 mm Measurements depth 2300 mm Measurements height 2600 mm Machine weight 4300 kg Main Drive Spindle speed range 12000 Number of axis 5 Movement X-Axis Movement 610 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table Table load 1350 Additional Equipment Coolant system with IKZ (20 bar) Spindle cooler Large chip conveyor This 5-axis Hurco VMX 24t was manufactured in 2008, featuring a Winmax Version 9 control system, a robust table size of 762 x 510 mm, and a high-speed spindle at 12000 rpm. It supports a maximum table load of 1350 kg and offers extensive X, Y, and Z travels of 610 mm each. Accessories include a coolant system with IKZ, spindle cooler, and a large chip conveyor. Contact us for more information about this machine. Cedpsx Nkpzsfx Ah Segl Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, WE SELL AN NICE CONDITION BMC30/M MACHINE IS READY TO WORK WE SELL AN NICE WORKING CONDITION HURCOP -BMC-30 CNC Vertical Machining Center HURCO BMC 30/M Year of manufacture: 1998 CNC path control Ultimax TRAVELS : X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Cedpfx Aex N Ndweh Segl Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 4 - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition READY TO WORK

Condition: excellent (used), Year of construction: 2019, 256mm maximum cutting diameter, 458mm max turned length, 4,800rpm spindle speed, 51mm bar capacity, 12 station VDI turret, Codpfx Aox D Uy Roh Sogl 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Codpex Iikbsfx Ah Ssgl Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: ready for operation (used), Hurco Process Board 415-0194-001A with Hurco Dual RS232 Board, used, 100% functional Cgjdpfji Ea R Iex Ah Sel

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 900 mm, Travel distances: X-axis (longitudinal) 3200 mm Y-axis (transverse) 2100 mm Z-axis (vertical) 900 mm Cjdpfxjx H Srlj Ah Sogl Working area: Table clamping surface 3000 x 1700 mm Spindle nose to table 66 – 966 mm Table load capacity 11000 kg 5-axis fork head: Tool holder HSK 63 A C-axis (4th axis) +/- 360° B-axis (5th axis) +100° / -110° Main drive: Drive type Motor spindle Drive power 63 kW Spindle speed: Spindle speed 18000 rpm Torque 106 Nm Max. rapid traverse: X and Y axes 15000 mm/min Machine weight: 37700 kg Accessories: HURCO CNC Machining Center DCX 32-5 Si (ATC 60) with MAX5 control - AXS control with detachable electronic handwheel - Pentium technology, SSD (Solid-State Drive), 2 GB RAM, Ethernet interface, USB interface, built-in self-diagnosis system, WINDOWS platform - Rigid tapping (tapping without compensation chuck) - 60-position tool changer - 5-axis fork head - Motor spindle - Spindle cooler - Chip conveyor 5-axis simultaneous machining, enabling simultaneous movement of 4 or 5 axes in NC operation.

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table width: 510 mm, table length: 760 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Cjdpfsv Tcfkox Ah Sogl Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: ready for operation (used), Year of construction: 2021, This 3-axis Hurco VM 10i was manufactured in 2021, featuring advanced capabilities like MAX5 control with dual 19" LCD displays, Ethernet and USB interfaces, and a solid-state drive for enhanced performance. It includes high-pressure coolant systems through the spindle, integrated hydraulic tool clamping, and a chip auger for efficient chip management. Consider the opportunity to buy this Hurco VM 10i vertical machining centre. Contact us for more information about this machine. Cgsdpfx Ahsx H A I Rj Sel Application Types Milling

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 762 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, nominal power (apparent): 22 kVA, controller manufacturer: Hurco, controller model: Max, workpiece weight (max.): 1,360 kg, total height: 2,775 mm, total length: 2,400 mm, total width: 2,200 mm, table width: 510 mm, table length: 1,020 mm, table load: 1,360 kg, overall weight: 4,900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 13,200 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: rotational speed infinitely variable, 2008 Hurco VMX30M Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Hurco Max Single Screen CNC Control Condition: Very Good High-Precision CNC Milling – Powerful, Rigid and Reliable 2008 Hurco VMX30M Vertical Machining Centre, in good working condition. Engineered in the USA by Hurco Companies Inc., the VMX30M delivers precision 3-axis machining, high-speed spindle performance, and intuitive CNC control. This model is ideal for toolrooms, precision engineering, and production machining across metals and composites, offering impressive rigidity and productivity in a compact footprint. ⚙️ Technical Specifications – Hurco VMX30M Model/Type: Hurco VMX30M Vertical Machining Centre Year: 2008 Travels (X / Y / Z): 762 mm / 510 mm / 610 mm Table Size (W × L): 510 mm × 1020 mm Max Table Load: 1360 kg Spindle Taper: BT 40 Spindle Speed: 10000 rpm Spindle Power: 13.2 kW Tool Changer Capacity: 24 stations (ATC) Rapid Traverse Rates (X / Y / Z): 30 / 30 / 20 m/min CNC Control: Hurco MAX Single Screen Control Machine Dimensions (L × W × H): 2400 × 2200 × 2775 mm Machine Weight: 4 900 kg Condition: Good – ready for production use 🌟 Key Features and Advantages Rigid Heavy-Cast Iron Frame – excellent vibration damping and machining accuracy. High-Speed 10 000 RPM Spindle – perfect for aluminium, steel, and tool steel machining. Powerful 13.2 kW Drive – delivers consistent torque across the speed range. Generous Travels (762 × 510 × 610 mm) – handles large parts or multiple fixtures easily. 24-Tool Automatic Tool Changer – reduces setup time and increases throughput. Hurco MAX Control Interface – user-friendly conversational and ISO G-code programming. High Rapids 30/30/20 m/min – fast positioning for shorter cycle times. Robust Design and Proven Reliability – built for continuous industrial operation. 🧰 Applications Precision machining and mould manufacture Aerospace and automotive components General engineering and toolroom production Prototyping and small-batch manufacture Why Choose This Hurco VMX30M High-accuracy CNC vertical machining centre for precision metal cutting. Good condition and production-ready. Compact footprint with large working envelope. Proven Hurco control system for easy setup and fast programming. Available immediately with delivery across Ireland and the UK at an extra cost. Cjdpfxsxy Iz Te Ah Segl *Specifications are given in good faith but not guaranteed* Hurco VMX30M for sale Used Hurco vertical machining centre Ireland Hurco VMX30 specifications Hurco VMX CNC mill for sale 3-axis CNC machining centre Hurco Used Hurco CNC machine UK Ireland Hurco VMX30M good condition Hurco CNC milling machine for sale Hurco VMX CNC with MAX control Used Machine Tools Ireland Hurco

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 15,000 rpm, - ULTIMAX 4 control Cgodex Hfnyjpfx Ah Sel - toolchanger for 24 tools - chip tank - electronical hand wheel - measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-15000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30/30/20 m/min Gewicht der Maschine ca. / weight 4300 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 1270 x 508 x 508mm, Csdpfx Ajxzt Sash Sogl 20 station tool changer, Table 1321 x 457mm, 15kW Spindle Motor , Spindle Taper DIN40, spindle speed 40 - 8000rpm, Hurco WINMAX Control, Low Volt Light, Coolant

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2440 mm Measurements depth 2180 mm Measurements height 2900 mm Machine weight 5540 kg Control Unit Brand HURCO Model MAX5 Main Drive Spindle speed range 12000 RPM Number of axis 5 Movement X-Axis Movement 760 mm X-Axis Rapid Traverse 35 m/min Cjdex D Ekyspfx Ah Sogl Y-Axis Movement 510 mm Y-Axis Rapid Traverse 35 m/min Z-Axis Movement 520 mm Z-Axis Rapid Traverse 30 m/min A-Axis Movement +30°/-110°, +/- 7 sec A-Axis Rapid Traverse 25 RPM C-Axis Movement 360°, +/- 7 sec C-Axis Rapid Traverse 25 RPM Workpiece Workpiece weight 140 kg Table Number of tslots 6 Table load 200 kg Tools Number of index 40 Max weight 7 kg Max tool length 300 mm Media Main electronic connection 31 kVA / 45 A / 400V Additional Equipment Central lubrication system: 1 pump (X,Y,Z) Taper DIN69871 SK-40 Material of machine bed: Cast-iron This 5-axis Hurco VMX30Ui + BMO Automation Titanium 50 was manufactured in 2017. Ideal for complex, multi-angle machining with its advanced vertical machining centre design. If you are looking to get high-quality milling capabilities, consider the Hurco VMX30Ui machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2013, General Data Cgsdpfsx D Igqsx Ah Sol Measurements width 2050 mm Measurements depth 4261 mm Measurements height 2597 mm Machine weight 8000 kg Main Drive Number of spindles 2 Spindle speed range 4500 rpm / 5000 rpm Number of axis 4 Movement X-Axis Movement 203.2 mm Z-Axis Movement 560 mm W-Axis Movement 640 mm Workpiece Workpiece drm over bed 508 mm Workpiece drm over support 508 mm Workpiece drm 336 mm Table Distance between 724.5 mm This 4-axis Hurco TMX 8MYS lathe was manufactured in 2013. It features a maximum turning diameter of 336mm and a swing over bed of 508mm. The distance between centers is 724.5mm, and it includes live tools with 12 positions in the turret. Ideal for precision machining, the Hurco TMX 8MYS machine we have for sale offers robust performance and versatility. Contact us for further details regarding this lathe. Application Types Turning