Fluid Bed Separator

RW Recycling World FBS 450 / FBS 600 / FBS 900

Year of construction: 2025, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. Godpfobbr Ipsx Aa Iobg At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Condition: good (used), Manufacturer: Främbs & Freudenberg Type: 2000-6000-2 Deck size 2.000 x 6.000 mm Number of decks: 2 Included: – Electrical Motor – Cardan Shaft – Springs Gbjdpfeg Snvbsx Aa Isg Vibrating screen can be overhauled, sandblasted and painted.

Condition: new, Year of construction: 2025, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, nuts, etc. see PDF. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Gbedobbr Iispfx Aa Iog 450mm, 600mm, 900mm.

Year of construction: 2025, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Gbedpfjchb Sbex Aa Ieg 450mm, 600mm, 900mm.

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Gjdsnt Uc Ropfx Aa Iebg Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Gsdpfxeua Tbwj Aa Ijbg Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Manufacturer: Schauenburg Type: 1440 / 2 Mach. No.: 0914 Gsdpfx Aajh Nnh Aj Iobg Year of Manufacture: 1983 Decks: 2 Included: – 15 kW/6 Electrical Motor – Cardan shaft – Springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: like new (used), Manufacturer: Ammann / Främbs & Freudenberg Gedpfx Aog Snutoa Iebg Size: 1.400 x 3.000 Included: – Electrical Motor – Cardan shaft – Springs Elements. Vibrating screen is overhauled, sandblasted and painted.

Condition: good (used), circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker, sorting system, shaking system, sifter, control screening machine, analysis screening machine -Manufacturer: Siebtechnik, control sieving machine Elekto-Schnellsieb with 5 sieve inserts Gjdpfxovgw Rno Aa Ijbg -Type: Perflux for the production of grinding wheels -Sieve inserts: Size 60 my to 2360 my, see photo parts list -Transport dimensions: 1200/800/H670 mm / 1200/800/H800 mm -Weight: 115 kg

Condition: used, functionality: fully functional, “IFE SZ 1500 FS” for Sale Manufacturer: IFE Type: SZ 1500 FS Mach. No.: 51 B084-10-1 Width: 1.500mm Year of Manufacture: 2005 Gjdpfsu Tktdsx Aa Isbg Decks: 5 2 Pcs. Unbalance Motors and Springs included. Will be overhauled, sandblasted and painted.