Fluid Bed Separator / Separationtable

RW Recycling World GmbH FBS 450 / FBS 600 / FBS 900

Condition: new, Year of construction: 2024, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, nuts, etc. see PDF. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Ncolhcjbbr Iiscqlep 450mm, 600mm, 900mm.

Year of construction: 2025, Condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. Nelhccqjchb Sbolecp At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.

Year of construction: 2025, Condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. At constant machine length, it is possible to choose between working width from: Nelhccs Snd Neqlocp 450mm, 600mm, 900mm.

Year of construction: 2007, Condition: used, ZF central filter with dust bag Ncelsuflg Nshccqlep Manufacturer: Mann+Hummel ProTec GmbH Type Zentralfilter ZF 450/70/600 HT Year of manufacture: 2007

Condition: used, Year of construction: 1998, table length 576 mm table width 400 mm control HEIDENHAIN TNC 223 B travel -x axis 350 mm travel -y axis 250 mm travel -z axis 315 mm Dimensions (L x W x H) 840 x 1.395 x 2.465 mm weight of the machine 1.850 kg Cavity Sinking EDM - Machine | Zimmer & Kreim GmbH - PEC 600 equipped with controlled C-axis and 16-way tool-changer. The machine is in a well-maintained. Please refer for further technical data and equipment information about this machine from the original order confirmation which you will receive with our offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PEC600 | PEC-600 Ncjlhcsvzcn Uscqljp

Year of construction: 2024, Condition: new, RSS 600 series Mono Rotor Shredder new model 2023 full options model. 18.5kw 40x40 knife block. rotor length approx. 600 mm infeed hopper approx. 600 x 900 mm Screen size in consultation Ncjlhccqoirt H Aelep motor cover and pusherbox guide strips as well PLC controlled with Reverse action as well an manual reverse. Conveyor and/or discharge screw is optional available. CE certificate/ Dutch suitable for various types of plastic/wood/or other material delivery in consultation Adjustments to e.g. motors, sieve, frame possible. Infeed or discharge conveyors, storage, metal separation possible. Larger or smaller models also available. Intrested, reactions with your name, company name and telephone number. We will call you.

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Ncjlhccoru Unmsqlop Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: new, Year of construction: 2025, - Cutting Force : 900 Tons - Capacity : up tp 25 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 220 kW - Machine Weight : 78.000 kg - PLC Controlled - Remote Control Avaliable Nelhccqogv Aa Ijlocp - Output Length Adjustable

Condition: ready for operation (used), Year of construction: 2015, operating hours: 25,068 h, Functionality: fully functional, input voltage: 400 V, type of input current: DC, total length: 6,000 mm, total height: 2,400 mm, total width: 2,660 mm, overall weight: 4,500 kg, usable height: 300 mm, pressure: 4 bar, input frequency: 50 Hz, compressed air connection: 6 bar, injection pressure: 4 bar, power: 23 kW (31.27 HP), For sale is a used continuous cleaning system from LPW Reinigungssysteme GmbH with the product designation PowerLine 600 T2. The machine is fully operational and can be inspected on site under power. TECHNICAL DATA: Workpiece size (in running direction): Largest approx. 360x630x300 mm (lxwxh) Smallest approx. 50x15x5mm (lxwxh) Heating: Electric Installed heating capacity: Container / cleaning indirectly via evaporator Tank / rinsing indirect via evaporator Evaporator 80kW, electric Pump/fan capacity: Cleaning 32m³/h, 2bar Rinsing 25m³/h, 2bar 2x drying 500m³/h each, 200mbar Heating time: approx. 2.5 hours (20°C to 70°C) Supply voltage: 3 x 400 Volt/N/PE - 50Hz Control voltage: 24V, DC Motor power (basic system): approx. 23 kW Total connected load: approx. 103kW Filling quantities: Tank / cleaning approx. 840l Tank / rinsing 1 approx. 815l Njlhccqotpciqslecp Coalescing oil separator 100l/h approx. 280l Evaporator approx. 885l Fresh water pressure: approx. 3-4bar Compressed air connection: approx. 6bar (min. 4.5 bar9 Exhaust air flow rate: approx. 1200³m/h (maximum) External dimensions of the system: Length approx. 6000mm Width approx. 2655mm Height approx. 2400mm Service side: In flow direction System weight (without filling): approx. 4500kg Paintwork: Switch cabinet (RAL 7035 light gray) Stainless steel (unpainted) Noise emission: 78dBA Further technical data can be found in the attached PDF document. The machine is prepared by hago for the purchaser electrically disconnected from the power supply and from media such as compressed air and water. The deinstallation of the ventilation system is also carried out by hago. Hago supports the delivery of the system to the hall door. Preparation for shipment, loading and transport of the machine must be organized and assumed by the buyer. The transfer of risk to the buyer is the hall door in the hall in which the machine is currently located.

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed Nelhjf Sqy Djccqlscp - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: excellent (used), Year of construction: 2021, conveyor belt length: 2,250 mm, conveyor belt width: 600 mm, Equipment: type plate available, MK Maschinenbau Kitz GmbH GUF-P 2000 AF 2550-600 Belt conveyor for light and medium-heavy goods Ncjlhcsuiwrrocqlop Stock no.: 503507 Machine type/ Device type: Conveyor belt Manufacturer: MK Maschinenbau Kitz GmbH Type: GUF-P 2000 AF 2550-600 Year of construction: 2021 Flat conveyor belt: Belt width: 600mm Belt length: 2250mm Load capacity: 75kg

Condition: like new (used), Manufacturer: Westdeutsche Getriebewerke GmbH Type: KCN 450/S Power: 211 kW Ratio: 71:1 RPM in/out: 1.485 / 20,9 Shaft ø in: 70 mm Ncelhccqsg Sttuolep Shaft ø out: 190 mm

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, filling opening width: 1,150 mm, filling opening length: 735 mm, total width: 2,000 mm, total height: 2,880 mm, total length: 1,900 mm, bale height: 1,200 mm, bale width: 1,200 mm, overall weight: 3,575 kg, transport height: 1,970 mm, power: 7.5 kW (10.20 HP), year of last overhaul: 2023, volume flow: 116 m³/h, transport width: 2,000 mm, transport length: 1,900 mm, How do you do? We hereby offer you, without obligation, a used, vertical baling press, from the manufacturer HSM, type VL 600, with 60t pressing force, year of manufacture 03/2004. The machine was used in a small logistics center for baling paper, cardboard and film and was only in operation for a few hours per week. The machine has been partially overhauled and tested. The machine documentation is available in German. A viewing of the press is possible by appointment. We would be pleased if this machine is of interest to you. Ncolouaxv Tshccqlep Your service team Mertens & Frowein GmbH

Condition: new, Year of construction: 2024, EF 600-NG bag-in-box dosing machine - for filling fruit juices, wine, vinegar, oil, etc. * High-quality stainless steel housing Nolhcst U Iiyscqlecp * Clear display with important information (current flow rate, remaining quantity, etc.) * preset quantities 1.5, 3, 5, 10, 20 liters * freely adjustable quantities * Cleaning program * Extensive statistics * Only short downtime due to double holder * Compact design

Year of construction: 2023, Condition: as good as new (ex-display), Screening plant for wood chips Demonstration machine | New machine Screening capacity: approx. 35 - 40 m³/h for wood chips Design: stationary consisting of: Oscillating screen type ASM-300 - Design: TOP LINE - Screening area: 3.0 m² - Fractions: 3 pieces - Drive power: 2,2 kW - Machine weight: approx. 1,900 kg - Machine colour: RAL 5002 ultramarine blue - Screens freely selectable Vibrating hopper type AVB-600 - Bunker volume: 6.0 m³ - Drive power: 2 x 2.2 kW - Machine weight: approx. 3,000 kg - Machine colour: RAL 5002 ultramarine blue Optional accessories: - Troughed belt conveyors for material discharge - Switch cabinet // Electrical installation Functional description and mode of operation: The wood chips are fed into the vibrating hopper type AVB-600 by means of a wheel loader. The wood chips are then fed onto the vibrating screen type ASM-300, which separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged by means of conveyor belts. The capacity of the screening plant is approx. 35 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Screening plant for wood chips | Wood chip screen | Oscillating screen | Flat screen | Vibrating screen Ncelhcjnkdmtscqljp

Year of construction: 2020, Condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Ncolhccqofwfpbslep Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Condition: excellent (used), Year of construction: 2021, conveyor belt length: 2,250 mm, conveyor belt width: 600 mm, Equipment: type plate available, MK Maschinenbau Kitz GmbH GUF-P 2000 AF 2550-600 Belt conveyor for light and medium-heavy goods Stock no.: 503507 Machine type/ Device type: Conveyor belt Manufacturer: MK Maschinenbau Kitz GmbH Type: GUF-P 2000 AF 2550-600 Year of construction: 2021 Flat conveyor belt: Ncelhccqjuiwrfjlop Belt width: 600mm Belt length: 2250mm Load capacity: 75kg

Condition: new, Year of construction: 2025, Ballshaping- and Delaminationmill Molinator for fine delamination! Diverse Types: RW VKR16/3 / 22-37kW and RW VKR 22/3 / 75-110kW Ncsledwqiuohccqlsp Input Composite Material Examples: Regrind from hair-wire, printed circuit boards, electronic circuits, other composited material. Al / Plastic, Cu / Plastic, Cu / Glass fibre, ABS / Plastic fibres, etc. Type selection: depending on the material / depending on layer thickness / depending on test‘s / according to the desired throughput. Description Molinator: In the inner acts very high forces (High acceleration / high relative-speed)! Bigger parts will be delaminated. Composite-material separates at the phase of boundaries. Metals will be ballshaped. Plastics depending on the specifications stays “fluffy” or will be grinded. These effects besides the desired delamination, are helpfully for the separation and are exactly coordinated to our separation-technology like Fluid Bed Separators / Sievemachines / Sifters.

Year of construction: 2025, Condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Ncslsbcnatohccqlop Sieve layers: 2 - 4 ply, granlulation 0,1-18mm freely. selectable.

Year of construction: 2025, Condition: new, Circle Sievemachine to sieve dry material: like flour-, grainy-, and granule-shaped material. Sizes from: wide 500-1500mm / length 1200-2400mm Nolhccqobcngijljcp Sieve layers: 2 - 4 ply, granlulation < 18mm freely selectable.

Year of construction: 2025, Condition: new, To sieve dry material: like flour-, grainy-, and granule-shaped material. Nolochb Ryjhccqljcp Sizes from: wide 500-1500mm / length 1200-2400mm Sieve layers: 2 - 4 layers, granulation 0,1-18mm freely selectable.

Year of construction: 2025, Condition: new, Zig Zag Air Sifter Sizes/ wides from 200mm - 1800mm Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm - 40mm, (bigger particles are possible with a special design) We are the manufacturers of these plants and we build Zig Zag Sifter Plants in different sizes see attachment. In order to make you a definite offer we need to know some points: 1. What material you want to separate? 2. Grain-size of the material? Ncolhechb Rusccqljp 3. Bulk weight kg/liter of your material. 4. We have technical center at our house, where we can test your material.

Condition: new, Year of construction: 2025, The system can be loaded onto a truck with a forklift and is ready for operation in just a few simple steps. A 16A socket is required. Total dimensions of the system LxWxH 3.5 x 1.06 x 2.98m (ready for operation) Precondition for the separation are differences in the material like: - Different sizes of particles - Differences of the density - Differences in the surface condition of the particle - Differences in the form of the particle - Grain size 0.1mm-30mm, (bigger particles are possible with a special design) Ncjlhccqofrugksljp

Condition: new, Pasteurizer with tube heat exchanger Ncslhccjb Nuqysqlop Nominal capacity 600 l/h (80°C pasteurisation temp., 10°C inlet temp. juice) Thermal rating 55 kW Electrical rating 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical protection 16 A Dimensions: Length 1,400 mm Width 900 mm Height 1,850 mm Weight (heating circuit drained) 330 kg Weight (heating circuit filled) 430 kg Heating oil consumption approx. 6 litres/h Max. exhaust temperature 180°C Noise level (LW, A) 83 dB

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Nelhccsu Thkaoqlecp Transport weight press 1,325 kg Condition of the baler: The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.