Zig Zag Sifter Plants

RW Recycling World ZZS 200-15-SM Semi Mobile ZZS Anlage

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. - Control for temperature regulation Rsdpfxsqu R Nae Anpew This machine is connected and ready for testing in our machine hall.

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Rodowxmb Ejpfx Anpsw Delivery time: immediate.

Condition: excellent (used), We have two almost identical sieving stations on frames to sit over bins. Both new in 2014 and in lovely condition. Photos show the machines before washing. 550mm sieve diameter. Choice of mesh screens. Each machine will be supplied with one screen. Rsdovpv Nujpfx Anpew

Year of construction: 2014, condition: repair required (used), functionality: fully functional, The machine has been idle unused for a few years now, so it needs maintenance before commissioning, which should be the responsibility of the buyer. Rodpfx Anetu U Ebopow

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. It is still in place and runnning. Buyer to decommision and collect. This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine Redpfxjxftitj Anpew

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Rsdperp E Nnjfx Anpsw

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm Rjdpfxst Ucqfj Anpjw The press was in operation until the production line was shut down.

Year of construction: 1999, condition: ready for operation (used), AMUT EA90/24 SINGLE SCREW EXTRUDER Type: RALDI Screw for PVC oil cooled Rsdpfx Anek Nn Dzopjw Application: PVC, PE or PP Working hours 48.000 DC Drive 36,3 KW Year of construction: 1999 11 digital heating controllers Melt pressure and melt temperature display SIEMENS SIMATIC DISPLAY Operating hours: 48,119 h Trigger control via the extruder possible Condition: Good operational The extruder is my property Sachal extrusion machines D-26345 Bockhorn-Grabstede Bahnhofstrasse 6 Germany

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines Rsdpeua Tbwjfx Anpew The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12298 010, overall weight: 5,000 kg, rotor diameter: 370 mm, number of blades: 60, total length: 3,186 mm, total height: 3,500 mm, total width: 2,900 mm, rotor length: 1,305 mm, power: 63 kW (85.66 HP), rotational speed (max.): 145 rpm, year of last overhaul: 2025, This machine was set up & designed to shred carpet & carpet tiles. It is water cooled & comes complete with a chiller and blower. Redpfoxuwtuex Anpew