Metal separator S+S (art.7067)

S+S MES40

Year of construction: 2017, Condition: good (used), Intended use of the unit The unit is designed for crushing and transporting biomass. The product is received in a quadruple screw conveyor system, which transports the product to the stone/iron separator, allowing foreign matter to be collected. The product falling through the stone/iron separator enters the EUBL hammer mill. The hammer mill then grinds the product in its special grinding chamber design optimized for biomass grinding, which is as follows: Grinding chamber for fine grinding: Biomill is optimized for fine grinding using hammer beaters with narrow to concave segments and the screen. Concave segments stop the product and prevent unnecessary rotation of the product, preventing the product from reaching the same speed as the hammer beaters. Primary grinding is against segments, which means less wear on the screen, intensive grinding, less heat generation, and short product residence time in the grinding chamber. Rarely does the product experience a temperature rise of more than 5°C after grinding due to short, thin hammer beaters that other mills generally cannot work with. This means that a fine and much narrower particle size distribution (PSD) can be achieved and larger screen holes used compared to conventional mills, and still achieve a finely ground product. After grinding, the product drops into the secondary hopper, which uses its twin-screw system to convey the product to the rotary valve. The product then exits the system without pressure. To allow the product to pass through the sieve in the mill, a self-cleaning nozzle filter is attached to the unit to provide a vacuum. No liability can be accepted for damage to the mill caused by foreign bodies in the raw material, such as steel, stone, metal, cement, waste and others. It is not allowed to grind products other than biomass. Byuwgglgyp A spark detection device such as FireFly must be installed with this unit, the unit is prepared for mounting a FireFly system. Complete documentation available.

Year of construction: 2019, Condition: new, with reinforced impeller 2800 min-1 4,0 kW B3 400/690 V IE 3 Max: 3200 min-1 T-max. 70°C incl. spare impeller Year of manufacture: 2019 Operating and assembly instructions available Weight approx. 76 kg Dmd0Ff

Condition: excellent (used), Year of construction: 1997, Hermle UWF 902 S C93Ikym Year of construction 1997 Control system: - Heidenhain TNC 426 Number of spindles: - Gear stage 1 (20 - 662 rpm) 2 (663 - 2000 rpm) 3 (2001 - 6300 rpm) Travels: X-axis 600 mm, Y-axis 450 mm, Z-axis 500 mm Work table: Work surface 900 x 528 mm Measuring system: - Direct measurement X-Y-Z - 3D measuring probe Coolant device: - 150 liters Accessories - Vice - 23 tool holders - Ethernet interface cable Availability: - Immediately Machine can be tested under power (desirable).

Condition: new, Year of construction: 2024, Troughed belt conveyor | Trough belt conveyor | Belt conveyor Demonstration machine Make: S&F GmbH Type: MFB-500/3 Belt width: 500 mm Centre distance (A-A): 3,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum motor Motor power: 1.1 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 160 mm Tensioning drum: Drum diameter 160 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 300 kg Machine colour: RAL 6025 Fern green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): U2L7K7Awxn Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5500x1400x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon+slots and dowel connection/mortised tenon, can be switched using a selector switch on the control cabinet. With basic equipment for optional use of counter profiles if the sash is rebated on the loose part. CE version Basic machine in the strongest frame welded construction, with thick-walled special hollow profiles. Guideways of the pressure beams for the press corners in a low-abrasion machined version. Fast, smooth, manual width adjustment using ball-bearing carriage, fixing in 50 mm hole grid, optional motorized width adjustment with hydraulic clamping (at an additional cost). Height adjustment and pressing using long-stroke cylinders in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore no vertical positioning of the horizontal pressure cylinders is necessary, which avoids cylinder collisions. Lower support can be adjusted in several positions to the most suitable insertion height. 3 KW compact hydraulic system with integrated control block, variable pressure control from 20 - 120 bar, pressure gauge Control via touch button with separate control circuits for the vertical and horizontal press cylinders, mounted on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke adapted to working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint: RAL 7035 light gray with RAL 7016 anthracite gray Working size: length x height = 4,500 mm x 2,750 mm Note: Actual working size: 4,500 x 3,000 mm (length x height) Space required: 5,500 mm x 1,400 mm x 3,550 mm (LengthxWidthxHeight) Article 00001147 ----- 1 medium pressure bar complete with pressure cylinder, pressure hose and shut-off valve up to 2,750 mm high Note: actual working height: 3,000 mm Article 00000471 ----- Individual pressure control for medium pressure bar, pressure control range up to max. 100 bar (For pressing cross-bar windows) Article 00000112 ----- infinitely height-adjustable cross pressure device, complete with pressure cylinder and abutment, throttle and shut-off valve Article 00000481 Gpe7S0 ----- Individual pressure control for cross pressure device pressure control range up to max. 100 bar (For pressing cross-bar window) Article 00000391 ----- Shut-off valve on the 3rd vertical cylinder Article 00000391 ----- Shut-off valve on the upper horizontal cylinder Article 00001005 ----- 3 x slanted window control for vertical cylinder Article 00000302 ----- 3x pendulum pressure plates attachable for pressing up to 60 degrees Article 00000631 ----- Double pendulum pressure plate for pointed window (triangle) Article 00000113 ----- 2 x extension for p...

Condition: used, dimension of workpiece - mm voltage 230 V Ukw7Dfnk3J 4 Achsen Anzeige Gerät total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 4-axis d.r.o.

Condition: new, Functionality: fully functional, Professional CNC router COMAGRAV NOTUS PLUS 3000 ATC VACUUM MULTI with automatic tool change and multifunction for milling and cutting acrylic, dibond, aluminum, PVC, foam, vinyl and other common materials, please see the attached files below. COMAGRAV NOTUS PLUS is a flagship built on a welded thick-walled steel frame. The base of the machine is stress-relieved by annealing, which is why we provide a lifetime warranty on this frame. Ul0F2Swmxb Sophisticated equipment such as AC servomotors, high-precision helical&pinion system, planetary backlash-free gearboxes and a long list of optional equipment make this machine an unrivaled solution for professionals. I believe that this professional CNC router is the best choice. COMAGRAV NOTUS PLUS machines work in many industries, from prototyping and model production, advertising production, to workshops with serial production. COMAGRAV NOTUS PLUS 3000 ATC VACUUM MULTI, offer no. 24220378, includes: • working size area 2100x3150mm • 6 vacuum zones • high-pressure vacuum with a maximum transport capacity of 250m3/hour • professional milling spindle with ceramic bearings, maximum speed 24.000RPM • automatic tool change • cyclone dust collector • spray cooling system • industrial dust collecting machine • MULTI PACKAGE • camera recognition system • Pneumatic oscillating knife • Tangential module U1 The production time of COMAGRAV CNC machines is usually between 8 -12 weeks depending on the product, its complexity and the availability of special parts. Upon prior agreement, we will be happy to demonstrate COMAGRAV machines to you at our showroom in Poříčí nad Sázavou.

Condition: excellent (used), CNC GEAR HOBBING MACHINE Fzjedzo S&T GHO 500

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, Turning diameter over cross slide: 5,500 mm, Rotational speed (max.): 60 rpm, Table diameter: 4,000 mm, ST - 40/55VC -Brand : S&T (KOREA BRAND) -Year : 2012 Gpcgyw -Max Swing : 5,500 -Table size : 4,000 -Turning Height : 2,600 -Table rpm : max 60 -5axis (Z/X/C/W1/W2) -ATC 16ea -Milling tool 1,500rpm -CTS -linear sclae (x/z/w1/w2) -Tool setter -Chip conveyor -Work piece probe

Condition: new, Year of construction: 2024, Troughed belt conveyor | Trough belt conveyor | Belt conveyor Demonstration machine Make: S&F GmbH Type: MFB-500/4 U2L3Ndlehd Belt width: 500 mm Centre distance (A-A): 4,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 160 mm Tensioning drum: Drum diameter 160 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 350 kg Machine colour: RAL 6025 Fern green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Working width 4500 mm Working height 3000 mm Number of cylinders 6 St. Dimensions (L/W/H) 5600x1350x3550 mm Weight 3000 kg S&S frame press Bavaria 2000 L ----- With automatic pressing cycle + manual control for corner connections tenon + slots and dowel connection / mortised tenon, can be changed using a selector switch on the control cabinet. With basic equipment for the optional use of counter profiles if the sash is on loose part to be folded over. CE version Basic machine in the strongest welded frame, with thick-walled special hollow profiles. Guideways of the pressure bars for the press corners in a low-abrasion finish. Fast, smooth, manual width adjustment by ball-bearing carriage, fixation in 50 mm Hole grid, optional motorized width adjustment with with hydraulic clamping (surcharge). Height adjustment and pressing by long-stroke cylinder in one work cycle. Right-hand press corners with integrated horizontal cylinders, therefore none vertical positioning of the horizontal printing cylinders necessary, avoiding cylinder collisions. Abutments below in several positions on each most favorable insertion height adjustable. 3 KW compact hydraulic system with integrated Control block, variable pressure control from 20 - 120 bar, manometer Control via push button with separate control circuits for the vertical and horizontal press cylinders on a freely movable control panel. 2 vertical press cylinders, double-acting, stroke on Adjusted working height, piston diameter 60 mm Pressure force per cylinder max. 2100 kg 2 horizontal press cylinders, double-acting, 80 mm stroke, piston diameter 40 mm Pressure force per cylinder max. 1250 kg Abutment and pressure plate depth 100 mm Control cabinet on the machine base on the left, 400 volts, 50 Hz Machine with ready-to-connect plug 16 A Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: length x height = 4,500 mm x 2,750 mm A notice: actual working size: 4,500 x 3,000 mm (length x height= Space required: 5,600 mm x 1,350 mm x 3,550 mm (length x width x height) Item 0000127 ----- Press height modification 2750/3000 mm a The machine is supplied with a 3,000 mm high pressure bar The cylinder attachment and the positions of the lower press corners however, correspond to the version with a press height of 2,750 mm. By installing 3 pieces of 300 mm long piston rod extensions the max. pressing height can be increased to 3,000 mm. Using the tools provided, it is possible to convert the Machine possible within approx. 10 minutes. Insertion heights: Undu93Tvel - lower insertion height for sashes with width 2,750mm; approx. 1,920 mm (piston rod extension installed) Scope of delivery: 1 piece support plate 3 piston rod extensions 300 mm 1 open-end wrench size 30 1 ratchet with socket wrench size. 24 1 piece holder for piston rod extensions and tool Hints: - The height is corrected for machines with a positioning function by parameter switching. Operation of the machine with the built-in piston rod extensions is replaced by another wallpaper displayed. - Total height of the machine approx. 3,400 mm It...

Condition: used, Year of construction: 2013, weight max. in kg 650 kg fork length 1150 mm stroke height ß mm Ukwlm7Tlgl weight of the machine ca. 250 KG dimensions of the machine ca. 3*1*1,3 m No. 5130 Electric pallet truck / Automated guided vehicle FTF S-Electronics / LogisticJet Paleti / FTF Own weight approx. 250 kg Working area: Dimensions 2916 x 800 x 1220 Load capacity 650 kg

Year of construction: 2024, Condition: new, We offer a sieve drum suitable for a Terra Select T60. Square offset perforation 20mm Sheet thickness = 6mm We are the largest manufacturer of screen drums on the market. 100% Made by M&S Gruseck GmbH - 100% MADE IN GERMANY. Ug0Ih0I7R2 - Material: S355 - Quality check before delivery incl. concentricity in operation - Punched and not lasered (no loss of positive steel properties due to heat) - Drum is painted - OUTSTANDING PRICE/PERFORMANCE RATIO We also offer screen drums suitable for other manufacturers (e.g. Pronar, Neuenhauser, Doppstadt and many more). Just ask us! We look forward to your inquiries!

Condition: new, Year of construction: 2024, Troughed belt conveyor | Trough belt conveyor | Belt conveyor Demonstration machine Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) U2L2Pjvrwz Drive: worm gear motor Motor power: 3.0 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 700 kg Machine colour: RAL 6018 Yellow green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Benqmpq777

Year of construction: 2024, Condition: new, We offer a sieve drum suitable for a Terra Select T60. Square offset perforation 15mm Sheet thickness = 6mm We are the largest manufacturer of screen drums on the market. 100% Made by M&S Gruseck GmbH - 100% MADE IN GERMANY. - Material: S355 - Quality check before delivery incl. concentricity in operation - Punched and not lasered (no loss of positive steel properties due to heat) - Drum is painted - OUTSTANDING PRICE/PERFORMANCE RATIO We also offer screen drums suitable for other manufacturers (e.g. Pronar, Neuenhauser, Doppstadt and many more). Ug0Gmg7Yrh Just ask us! We look forward to your inquiries!

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Stable frame welded construction of thick-walled Special hollow profiles , sliding table and pressure beam with 50 mm hole pattern . On the left side continuous abutment for grouting the wide , lower abutment in 2 levels. Vertical pressing cylinder on specialty bar with one- quick adjustment with weight compensation in the 50 mm hole pattern adjustable in height. Long sliding table ensure the continuous recording of high jacking forces . Fast, smooth width adjustment with ball bearing Carriage with central fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and equipped with counterbalance . Lower horizontal pressing cylinders with bore for two abutments levels without weight compensation . Abutment and pressure plate depth 100 mm Machine controlled electro -hydraulic with 2 pieces vertical pressure cylinders d = 60 mm, stroke 120 mm, single-acting, with counterbalance and One-hand height adjustment, 2 piece horizontal pressure cylinders d = 40 mm Benql3Osv2 stroke, 120 mm single-acting ( 1 x with weight compensation ), 2 hand control valves , Pressure gauge, pressure regulator valve 1 of 20 to 150 bar corresponds to 550 4200 kg compression force vertically. With 3 kW three-phase motor for 400 volts , 50 Hz Operating voltage. Complete with electrical connection . Painting RAL 7035 anthracite gray with light gray RAL 7016 . (technical details according to manufacturer - without guarantee ! ) The detailed technical description can be found in the attached pdf file

Year of construction: 2024, Condition: new, We offer a sieve drum suitable for a Doppstadt SM718. Round offset perforation 80mm Sheet thickness = 10mm We are the largest manufacturer of screen drums on the market. 100% Made by M&S Gruseck GmbH - 100% MADE IN GERMANY. - Material: S355 - Quality check before delivery incl. concentricity in operation - Punched and not lasered (no loss of positive steel properties due to heat) - Drum is painted - OUTSTANDING PRICE/PERFORMANCE RATIO We also offer screen drums suitable for other manufacturers (e.g. Pronar, Neuenhauser, Terra Select and many more). Just ask us! D7Vybjc We look forward to your inquiries!

Condition: used, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm Dpbklp S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article 00000374 1.00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article 0000047 1.00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 0000038 1.00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Article 0000048 1.00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article 0000039 1.00 pc Shut-off valve on the 3rd vertical cylinder Article 0000039 1.00 pc Shut-off valve on the upper horizontal cylinder Article 0000050 1.00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article 00003117 1.00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item 00099000 All pressure plates and abutments covered with plastic Article 0000049 1.00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article 0000063 1.00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article 0000042 1....

Year of construction: 2024, Condition: new, We offer a sieve drum suitable for a Doppstadt SM620. Square offset perforation 80mm Sheet thickness = 10mm We are the largest manufacturer of screen drums on the market. 100% Made by M&S Gruseck GmbH - 100% MADE IN GERMANY. Ug0Foniga7 - Material: S355 - Quality check before delivery incl. concentricity in operation - Punched and not lasered (no loss of positive steel properties due to heat) - Drum is painted - OUTSTANDING PRICE/PERFORMANCE RATIO We also offer screen drums suitable for other manufacturers (e.g. Pronar, Neuenhauser, Terra Select and many more). Just ask us! We look forward to your inquiries!

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Bfe07Xm0S3

Year of construction: 2024, Condition: new, We offer a sieve drum suitable for a Doppstadt SM620. Square offset perforation 30mm Sheet thickness = 6mm We are the largest manufacturer of screen drums on the market. 100% Made by M&S Gruseck GmbH - 100% MADE IN GERMANY. - Material: S355 - Quality check before delivery incl. concentricity in operation - Punched and not lasered (no loss of positive steel properties due to heat) - Drum is painted - OUTSTANDING PRICE/PERFORMANCE RATIO Ugz92Tgw9B We also offer screen drums suitable for other manufacturers (e.g. Pronar, Neuenhauser, Terra Select and many more). Just ask us! We look forward to your inquiries!

Condition: new, Working width 4000 mm Benqa2Tcqw Working height 2600 mm Number of cylinders 5 St. weight 2000 kg Dimensions (L/W/H) 5550x1300x3000 mm

Year of construction: 2024, Condition: new, We offer a sieve drum suitable for a Doppstadt SM620. Ugz0Izfh7F Square offset perforation 20mm Sheet thickness = 8mm We are the largest manufacturer of screen drums on the market. 100% Made by M&S Gruseck GmbH - 100% MADE IN GERMANY. - Material: S355 - Quality check before delivery incl. concentricity in operation - Punched and not lasered (no loss of positive steel properties due to heat) - Drum is painted - OUTSTANDING PRICE/PERFORMANCE RATIO We also offer screen drums suitable for other manufacturers (e.g. Pronar, Neuenhauser, Terra Select and many more). Just ask us! We look forward to your inquiries!

Year of construction: 2024, Condition: new, We offer a sieve drum suitable for a Doppstadt SM620. Beixjva Square offset perforation 15mm Sheet thickness = 6mm We are the largest manufacturer of screen drums on the market. 100% Made by M&S Gruseck GmbH - 100% MADE IN GERMANY. - Material: S355 - Quality check before delivery incl. concentricity in operation - Punched and not lasered (no loss of positive steel properties due to heat) - Drum is painted - OUTSTANDING PRICE/PERFORMANCE RATIO We also offer screen drums suitable for other manufacturers (e.g. Pronar, Neuenhauser, Terra Select and many more). Just ask us! We look forward to your inquiries!