Long bending machine HKS-CNC 4m Profi

SAS HKS-CNC 4m Profi

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Fsdpfsifi D Tsx Agmeft Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is an AMADA AE-2510 NT turret punch press from 2017. The machine is in very good condition, fully functional, and has been in continuous production and regularly serviced. This is an advanced machine for precise sheet metal processing, ensuring high quality and work efficiency. Technical Data and Features: Model: AMADA AE-2510 NT Year of Manufacture: 2017 Control: Easy-to-use AMNC controller with integrated software. Drive: Energy-efficient servo-electric drive, lowering operational costs. Precision: High processing precision due to a variable drive. Tooling: Fast tool changes (approximately 1.5 seconds on average). 51 tool stations. Ffodpewp Ul Hjfx Agmet 4 AMADEX stations for automatic tool rotation at any angle. The turret rotates the shortest path for minimal tool change times. Minimizes setup time. Capable of using special tools, such as slitting tools. Construction: Robust, closed frame to minimize deformation under heavy loads, ensuring high accuracy, reduced vibrations, and extended tool life. Noise and Vibration Level: Reduced due to new servo drives. Machine Condition: Used, in very good condition, fully functional. It has been in continuous production and regularly serviced. Location: Ożarów Mazowiecki, Poland Additional Information: The offer does not include disassembly, delivery, or tools.

Condition: like new (used), Year of construction: 2003, Pivatic Automatic Line - Pivatic 800mm coil width uncoiler with sheet straightener and roller feeder- hydraulic Type: SMTCL 800 T5 Year of construction: 2003 - Pivatic hydraulic punching machine Type: PCC80 TTI Year built: 2003 Max pressure punching machine equipment: - two tool blocks AXIS Z1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). AXIS Y1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). Ffodjtp Ta Eopfx Agmjt -guillotine - unloading conveyor (conveyor belt) with additional moving table for sorting workpieces - unloading conveyor (conveyor belt) -control panel (SIMENS) - Hydraulic longitudinal bending module with working range of 1750mm Pivatic Type: FLN 175 Year of construction: 2003 Bending line equipment: -gripper feeder AXIS X1 - rotary table with a diameter of 750mm -EIA W1 longitudinal bending with a length of 1750mm -gripper feeder AXE A1 -gripper feeder AXIS B1 -AXIS Q1 longitudinal bending with length 1750mm - gripper feeder AXIS X1 - unloading conveyor -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size -transport of workpieces is carried out on brush tables -Hydraulic transverse bending module with a working range of 800mm Pivatic TYPE: FSW 80 Year of construction: 2014 Bending line equipment: -loading conveyor (belt conveyor). -OŚ A2 transverse bending with a length of 800mm -OŚ B2 transverse bending with a length of 800mm - unloading conveyor (belt conveyor) -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size -the whole line is equipped with a safety system (light curtains SICK) - cooling system Highly efficient device. Greetings,

Condition: excellent (used), Year of construction: 2014, operating hours: 500 h, functionality: fully functional, machine/vehicle number: MD9 +S4.30xe+IA+ACP+P42516+SAP, SALVAGNINI LINE YEAR 2014 WORKING HOURS 500 MACHINE LIKE NEW MD1-3015.RCP.M9+S4X-E.30.H2.70.SSP.EI09.BU31.P2R36.DF/CS5Y.UL1H/ HU22E+ IA3015/TC30155D+R51E+SIX.NT+JOBLINE.CONSOLE+SIMULX+ZVIEWER ACP28+RIP3015+P4Xe-2516.LS.LI.ABA.MBC.ZL.ZTL. SFE.ES.RES.IEC1.CLA.P.PSE.UC570.UP136+SAP27.POS+SIX.NT+JOBLINE.C ONSOLE Ffjdpfx Agsvx T I Hsmst

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. The textile printing machine is currently still in operation and can be viewed at any time by appointment. The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. We are also selling all available spare parts, colors, etc. Technical specifications: Ffedpfsvmdw Isx Agmet Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Condition: good (used), Year of construction: 2006, Gebruikte 4 meter CNC-kantbank van Bystronic Ffedpfx Agewz Iwaemet Type: PR 200 4100 Bouwjaar: 2006 Capaciteit: 4100 x 200 ton Cybelec CNC-besturing Y1, Y2, X, R, Z1 en Z2 Hydraulische boven- en onderklemming Hydraulische CNC-bombering

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hydraulic Bending Machine Jorns CH-4932 – 8 meters Fsdpfxowt Eikj Agmeft Type: MAXI-MULTI-LINE-200-SM-CNC400A-8 Year of Manufacture: 2000 Technical Specifications: - Working length: 8 meters - Installed power: 11 kW

Condition: good (used), Brand Boschert Model EL 500 Digital Year of construction 2009 Press force 28 tons Ffjdpfx Ajw Hyc Sjgmet Throat depth 180 mm Punching capacity 40 mm in 6 mm Worktable size 500x1000 mm Number of strokes 180 pcs Dimensions 2400x1580x1540 mm Weight 2000 kg Power 5 kW

Condition: good (used), functionality: fully functional, Year of construction: 1989, sheet thickness steel (max.): 6 mm, table height: 900 mm, power: 4 kW (5.44 HP), overall weight: 2,150 kg, total length: 1,550 mm, total width: 1,200 mm, total height: 1,350 mm, cutting length (max.): 200 mm, Hydraulic notching machine, adjustable angle 30-120°, cutting capacity 6 mm, cutting length 200 mm, punching station on the back siede, footpedal, accessoires Ffodpfevkg Nuex Agmet

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 28,300 h, machine/vehicle number: 16500126, Press force: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between columns: 1060 mm Table width: 60 mm X-axis backgauge travel range: 500 mm X-axis travel: 300 mm X-axis travel speed: 1500 mm/s R-axis travel: 100 mm R-axis travel speed: 500 mm/s Z-axis travel: 955 mm Z-axis approach speed: 2000 mm/s Y-axis approach speed: 300 mm/s Maximum Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Fsdowv N Najpfx Agmsft Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without increased clearance and stroke, approx. [H]: 2449 mm 1. Intelligent control system and drive with an exceptionally low noise emission (below 75 dB) in the Xpert 40 enables part production with about 30% lower energy consumption compared to conventional electrically-driven machines. 2. ByVision software with a 22-inch LCD display and touch technology 3. Intelligent process control guidance with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Ambient temperature from 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. 'Bend G2' – optical safety system with manual height adjustment 11. 6-axis backgauge (3 additional axes) 12. 3-backgauge set - Xpert 40 (N0002.0040.000) - Set for integrating a third backgauge in the press brake 13. Ergonomic LED lighting package - Light output: 1500 lux 14. Ergonomic front supports with table. Max. load is 35 kg. 15. 'At your fingertips' tool cabinet - accommodates 3m of tools within easy reach (1 set of punches and 2 sets of dies). 16. Optical bending guidance system – the operator is guided throughout the bending process by the optical guiding system. 17. Ergo Bending Line Laser – Bystronic Bending Line Laser serves as a visual assistance for the operator by projecting a bending line on the material surface. The operator is supported by a virtual bending line when the backgauge fingers cannot be used (fully or partially). The laser line can be set at different heights depending on the die height (e.g., 55 / 100 mm), depending on material thickness or workpiece size. 18. Productive XPT clamping package (WILA NSCL II upper tool clamp and T12/90 table) 19. WILA hydraulic clamping package includes both upper and lower tool clamping with T12/90 table. 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT-type (Wila) upper tool clamping allows tool mounting in 0 and 180° orientations. 21. T12/90 table (Productive XPT clamping package) – T12/90 table with a height of 90 mm and width of 72 mm offers extensive space for Z-bends. The machine is fully operational. In continuous use. Viewing and testing of the machine are welcome.