Sheet metal folder

Schechtl MAB 310 / ECT

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Knedpfetk It Sjx Ab Djb Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Year of construction: 2009, machine/vehicle number: SO128, Used Blow Molding Machine Contiform This used Krones Contiform S14 blow molding machine is engineered for high-output PET bottle production in modern beverage manufacturing. With a maximum speed of up to 25,000 bottles per hour, it is an excellent choice for businesses looking to expand capacity or upgrade a used bottling line with reliable second hand industrial packaging equipment. The machine is equipped with a Siemens PLC and a Krones HMI for robust automation and operator-friendly control. Neck-handling transfer ensures stable bottle handling across formats, while the rotary architecture delivers consistent performance for beverage production. Manufactured by Krones, a global leader in beverage production technology, this model supports PET containers and is suitable for a wide range of products including still and sparkling water, soft drinks, milk, oil, beer, wine, and spirits. The current setup is optimized for 1.5L format and a maximum container height of 320 mm, making it a versatile asset for PET bottle processing in integrated bottling equipment lines. Technical Specifications & Performance Data Manufacturer: Krones Model series: Contiform Model code: S14 Year of manufacture: 2009 Maximum speed: 25,000 bottles/hour Container material: PET Current format: 1.5L Maximum container height: 320 mm Worktable height: 1470 mm Type: Rotary Transfer type: Neck-handling Neck finish: Alaska Number of cavities (molds): 14 Number of spindles: 7 Number of grippers (inlet/outlet): 7 Work direction: Counterclockwise Electrical supply: 400 V, 3 PH + N, 50 Hz Rated current: 313 A Advanced Automation & Control Systems The machine features a Siemens PLC for reliable process control and a Krones HMI for intuitive operation, recipe management, and diagnostics. The electrical configuration at 400 V and 50 Hz with 3 PH + N supports stable, industrial-grade performance. Safety guarding and interlocked access points facilitate secure operation during production and changeovers. Neck-handling design contributes to smoother format adjustments and reduced container scuffing. Production Line Integration Capabilities Knodpfx Ajx H Tgdeb Deb This Krones Contiform S14 can operate as a standalone blow molder or be integrated into a complete beverage production line. It interfaces smoothly with preform handling systems, high- and low-pressure air utilities, and downstream conveyors leading to filling, labeling, and packaging machinery. The rotary platform and neck-handling transfer provide compatibility across typical PET bottle sizes, including 1.5L and other common formats used in water and soft drink applications. Machine Condition & Maintenance History The unit is available in multiple supply options: as-is (seen and liked), refurbished and guaranteed, or ready for operation with compatible spare parts. A 6-month warranty is available when supplied refurbished. These options provide flexibility to match project timelines ...

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut Ksdpowiri Aofx Ab Donb - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Knjdpfxst Ity Do Ab Djb Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: used, Year of construction: 2001, gebraucht 2001 Knedpfxowirkgo Ab Deb 9647 prompt, Zwischenverkauf v Italien 23200 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The Forstner nuSLIT Series makes all your dreams come true, in a modern sheet metal workshop and takes your production to a new level consider flexibility and productivity. With nuSLIT every function can be operated from the touch panel: coil width, finished lengths, straightening pressure to avoid stop marks, the width settings and operation of the slitting knives. nuSLIT can be integrated in a programmed production flow. The control system is totally compatible with nuIT, allowing you to plan and program your entire production from your office desk with no manual intervention. Combine with the number of decoilers you want and a manual or powered coil selector. There isn’t a better slitting and cut-to-length machine on the market! The most important advantages: Alternating knife arrangement Unbeatable slitting precision Innovative clamping system Control system can be integrated with nuIT Kodpfx Aswy Hxasb Dsnb Fastest knife change on the market

Condition: good (used), Year of construction: 1984, machine/vehicle number: 6229, Offer 24483 Technical data: - max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle setting preselectable 6 - 135 ° - 6-fold bending angle preselection - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - of the bending beam 50 mm - of the lower beam 50 mm - E. foot switch - Upper beam drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg Kodpfxeu Eq Rpj Ab Donb

Condition: used, Complete Bottling Line for Water (PET 1.5L) – Overview This used PET bottling line is configured for still water in 1.5-liter bottles, delivering a performance range of approximately 12,000 to 16,000 bottles per hour. Designed for industrial packaging and beverage production, it combines proven second hand equipment from recognized manufacturers to offer a reliable, efficient solution for a used bottling line. The configuration includes preform handling, blow molding, filling, capping support, labeling, shrink wrapping, handle application, palletizing, and conveyors, enabling a seamless end-to-end packaging process. Key components include a preform tipper and elevator by Sameto Technifil, a Siedel SBO10 blow molder, an Alsim Asmojet filler, an Arol cap feeder, a Kronos Contiroll labeling machine, an ACMI Fenix 165 shrink wrapper, and a Smipack HA50 handle applicator. This versatile packaging machinery set-up is ideal for beverage production facilities seeking to expand or replace an existing second hand line with dependable equipment and consistent output. Technical Specifications & Performance Data Production speed: 12,000–16,000 bottles/hour Primary product: Water Container type: PET Bottle format: 1.5L Preform tipper and elevator: Sameto Technifil EBH 2050 (2010) Blow molding machine: Siedel SBO10 (2010) Filling machine: Alsim Asmojet (1999) Cap feeder: Arol Labeling machine: Kronos Contiroll (2004) Shrink wrapper: ACMI Fenix 165 (2019) Handle applicator: Smipack HA50 (2002) Additional units: Mixer, palletizing, conveyors Knodpfx Abjxywgls Djb Advanced Automation & Control Systems The line architecture supports synchronized operation across blow molding, filling, labeling, and end-of-line packaging through standard industrial control interfaces. Individual machine HMIs typically enable format-related adjustments, recipe selection, and real-time status monitoring. Safety interlocks, guarding, and emergency stop interfaces allow integrated stop/start logic across conveyors and processing units for consistent flow and minimal downtime during production. Production Line Integration Capabilities This complete line is designed for inline operation with continuous bottle flow from preform handling through to palletizing. Included conveyors facilitate smooth transfers between machines, helping to maintain stable throughput at the specified performance range. The configuration is suited for PET water bottling at 1.5L and can accommodate typical beverage production requirements for industrial packaging. Integration with upstream preform feeding and downstream logistics is supported by standard mechanical and control interfaces. Machine Condition & Maintenance History Offered as a second hand used bottling line, the equipment mix spans manufacturing years from 1999 to 2019. The line is presented for sale in working condition and is suitable for recommissioning for beverage production.

Condition: excellent (used), functionality: fully functional, Sandblasting machine for stone slabs, width 200 cm (including dust extraction system) Ksdpfexxlwpox Ab Dsnb

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, Demonstration Machine Cidan MF - Manual Folding Machine The new CIDAN MF is a user-friendly manual folding machine with a compact size and low weight. This allows you to take this practical assistant anywhere and bend sheet metal directly in your construction vehicle or on site quickly and effortlessly. This machine meets the same high standards as our quality machines, which we have been manufacturing for our customers in this industry for over a hundred years. The manual folding machine is extremely robust and designed for long-lasting use. Thanks to its intuitive operation, this machine is immediately ready for use and delivers precise results. It enables efficient work, regardless of location or the operator’s experience. You can work efficiently and reliably without losing time on extensive training or setup adjustments. Manufacturer: CIDAN Working length: 2040 mm Steel* (400 N/mm2): 0.6 mm Knedpjx Ngf Ssfx Ab Djb Stainless steel* (600 N/mm2): 0.5 mm Aluminium* (200 N/mm2): 1.0 mm Weight: 140 kg For more information: cidanmachinery.com