Scheugenpflug DOS P016 piston dispenser dosing unit piston dosing system

Scheugenpflug DOS P016

Scheugenpflug DOS P016 Piston Dispenser
Piston dispensing system DOS P
for a wide range of requirements

The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube.

The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes.

In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application.

Dcodszc Nplopfx Adron
Your advantages
No dependence of dispensing accuracy on temperature, pressure, or viscosity
Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders
Wide range of applications (in terms of materials and applications)

Important functions
Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio
Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level
Temperature control of the material via mixing tube heating (optional)
Dispensing needle monitoring with camera (optional)

Product data

General
Materials: 1K and 2K
Viscosity: From liquid to highly viscous
Fillers: Filled and/or abrasive media
Operating principle: Volumetric dispensing

Properties
Constant mixing ratio for 2K
Independent of temperature, material feed pressure, and viscosity of the casting resin
Exactly reproducible and highly precise results
Highest process reliability

Application
Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top)

DOS P016
Max. volume/shot 2K at ratio 1:1
1K: 0.06/17 ml
2K: 0.1/32 ml
Dispensing speed max. 1 [ml/s]: 2
Dispensing accuracy at max. stroke [%]: < 0.5
Heatable up to max. 2 [°C]: 80

Outlets:
1K: 1-4, 6, 8
2K: 1-4
Weight: 14 kg

Dimensions (W x H x D)
290 x 350 x 230 mm

Video on how it works

"Everything from one source: We will gladly offer you suitable bank financing for your project."

More dispensers - new and used - can be found in our shop!
International shipping costs on request!

The listing was translated automatically. Translation errors are possible.