Used Scheugenpflug Scheugenpflug Dos P016 Piston Dispenser Dosing Unit Piston Dosing System for sale (63,354)

Year of construction: 2013, condition: excellent (used), Scheugenpflug DOS P016 Piston Dispenser Piston dispensing system DOS P for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning that the dispensed material volume is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting compound via the corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components simultaneously through separate channels towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the dispensing of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio at all times, thus ensuring the highest process reliability. At the same time, pressure-, moisture-, or shear-sensitive potting compounds can also be handled gently without any fear of material changes. Users also benefit from simple and fast maintenance, high uptime, and significantly reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating, or dispensing head heating, these systems can be flexibly adapted to the respective application. Your advantages No dependence of dispensing accuracy on temperature, pressure, or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (in terms of materials and applications) Important functions Simultaneous extrusion of the cylinders by a common drive mechanism enables a homogeneous mixing ratio Sensor-based monitoring of the inlet and outlet valves as well as the cylinder filling level Temperature control of the material via mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure, and viscosity of the casting resin Exactly reproducible and highly precise results Highest process reliability Application Potting, sealing, bonding, application of thermally conductive materials, encapsulation (Glob Top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on how it works Dcedpfxjzc Npls Adrsn "Everything from one source: We will gladly offer you suitable bank financing for your project." More dispensers - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), For sale: Professional automatic Vickers hardness tester Mitutoyo HV-100, made in Japan, in excellent technical and visual condition. The device is equipped with the AUTOVICK automatic measurement system and the Mitutoyo Vision Unit, enabling fast, repeatable and fully automatic hardness measurements without operator subjectivity. Intended for measurement laboratories, quality control departments, manufacturing plants, automotive, aerospace, and toolmaking sectors. —— Key information • Measurement method: Vickers (HV) • Model: HV-100 (series HV-100B / HV-100C / 100D) • Load range: up to 100 kgf • Automatic AUTOVICK system • Integrated Mitutoyo Vision Unit • Automatic impression recognition and HV calculation • Made in Japan • Power supply: 230 V • Stable, heavy-duty laboratory construction —— Dcsdpfx Aoyc H I Sodron Technical condition • Device operational and complete • Very good visual condition • Regularly used in an industrial environment • Last technical inspection: 2020 • Ready for immediate operation after connection —— Included in the set • Mitutoyo HV-100 hardness tester • Vision Unit (measuring camera) • AUTOVICK automatic system • Set of weights • Original accessories and holders • Transport cases with equipment • Original Mitutoyo documentation and manuals • Weight: 65 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: FD-SPA (291, Bj.2014), FD-SPA-A (334, Bj.2015), total height: 2,300 mm, total width: 900 mm, total length: 1,500 mm, overall weight: 250 kg, type of input current: AC, input voltage: 230 V, compressed air connection: 1 bar, pressure: 6 bar, input current: 10 A, Equipment: documentation/manual, MCPI Fine Dosing FD-SPA / FD-MPA-A Precision Powder Dosing Systems (2 units) For sale are two high-quality precision dosing systems from a food processing plant. (Spices) The systems were used for dosing spices, flours, and other powdered raw materials and were in productive use until recently. Both machines are fully functional and can be inspected or demonstrated. The MCPI systems are particularly suitable for the precise gravimetric dosing of: Spices Flours Baking ingredients Dietary supplements Food additives Powdered chemical products Granulates and bulk solids Technical data, Machine 1 Dedjz Hxbbepfx Adrocn Type: FD-SPA Manufacturer: MCPI Year of construction: 2014 Machine No.: 291 Equipment Gravimetric powder dosing Stainless steel dosing hopper Schneider Electric Magelis Touchpanel PLC control Vacuum conveying Control cabinet Work table Food-grade design Dimensions (approx.) Length: 1,500 mm Width: 900 mm Height: 2,300 mm Weight: approx. 250 to 350 kg Technical data, Machine 2 Type: FD-MPA-A Manufacturer: MCPI Year of construction: 2015 Machine No.: 334 Technical design Opti-Filler FD-MPA-A Weighing cell, Class A Dosing width 60 mm Storage hopper 15 liters Powder weighing Color touchscreen 5.7" Low level alarm Vacuum conveying Dimensions (approx.) Length: 1,500 mm Width: 900 mm Height: 2,300 mm Weight: approx. 250 to 350 kg Condition ✅ Fully functional ✅ Used in production until recently ✅ Very well-maintained condition ✅ Immediately available ✅ Original documents and invoices available ✅ Functional demonstration possible by arrangement New price Verifiable investment value: System 2014: approx. €35,000 net System 2015: approx. €28,000 net Total investment: over €63,000 net Scope of supply 2 complete MCPI dosing systems Dosing stations Vacuum conveying systems Control cabinets Touch operating devices Work tables Available documentation Location 56355 Nastätten Price €22,500 negotiable for both systems Individual sale possible by arrangement. Keywords: MCPI Fine Dosing, Powder Doser, Spice Doser, Flour Doser, Dosing System, Bulk Solids Technology, Food Technology, Dosing System, Powder Conveying, Vacuum Conveying, Opti-Filler, PLC Control, Weighing Technology, Packaging Technology.

Condition: good (used), Year of construction: 2010, total length: 1,600 mm, total width: 1,900 mm, total height: 3,200 mm, overall weight: 600 kg, For Sale: Dosing unit / flour discharge point from Kaak / Silowacht Brand: Kaak / Silowacht Type: flour discharge point Year of construction: 2010 The height is adjustable, the total height is approximately 3.20 meters. The flour discharge point can be mounted on a pole / column. Diameter of the lower filling point: 99 cm Maximum weight of flour: 100 KG Included: - weighing hopper for flour / meal - load cells - water weighing hopper unit - filter unit - pneumatic valves - level gauges - liquid yeast meter, valve and connection - Siemens S7-1500 (Siemens control system) - piping, if required It is possible to inspect this machine on-site. Dcedpfx Aszv S Nmedrjn If you have any questions or comments, please feel free to contact us.

Condition: excellent (used), Mettler Toledo T90 Excellence Titration System Manufacturer / Type Manufacturer: Mettler Toledo Type: T90 Excellence Device Type: Automatic Titration System / Titrator Made in Switzerland Description Dedpezc Ic Dsfx Adrscn Used automatic titration system from the Mettler Toledo Excellence series. The system is suitable for laboratory analyses, automatic titrations, pH measurements, quality assurance, and applications in research, development, and industrial analytics. Technical Data Software Version: 4.0.1 Power Supply: +5 V DC / 2.0 A and 24 V DC / 1.5 A Ethernet connection CAN IN / CAN OUT COM interfaces PT1000 connections Sensor connections Connection for stirrers and pumps Equipment Mettler Toledo T90 base unit Touchscreen control unit Multiple dosing units / dosing modules Titration attachment and electrode holder Sensors and electrodes as shown in the pictures Hoses and connecting cables Eppendorf accessories box Fluoride test paper Other accessories as shown in the pictures Areas of application Automatic titrations pH measurements Laboratory analytics Quality assurance Chemical analysis Research and development Industrial and testing laboratories Condition Used Optical condition as shown in the pictures Normal storage and usage marks present Scope of delivery Mettler Toledo T90 titrator Touchscreen control unit Multiple Mettler Toledo dosing units Titration attachment / holders Sensors, hoses, and cables as shown in the pictures Eppendorf accessories box Other accessories as shown in the pictures Shipping or freight shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by phone.

Condition: used, functionality: limited functionality, Four-compartment dosing unit, skid-mounted, mobile, used – row-type feeder. Each hopper approx. 20 t, loader feeding width approx. 3.65 m, continuous operation output approx. 400 t/h. Complete with hopper extensions, main discharge belt, separate 18 m inclined conveyor, motor-driven swiveling undercarriage, material moistening, material shortage sensors. For production of mineral mixes, base layers, etc. Option: Additional cost for new control system. Dcedpfx Aox Rvc Ajdrjn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The Scheugenpflug dosing system K06399 is a stand-alone dosing machine. Dcsdpfxjua Acqs Adrsn The unit is specifically configured to dispense DOWSIL 744 from a 20 kg Hobbock. It features the following axes: X, Y, Z, needle pivotable 45°, carrier rotatable with a lift/rotate unit. A needle cleaning and measuring station is included. The Bosch conveyor belt for the carriers has a fixed width of 400 mm (non-adjustable). Please note: originally, the unit was equipped with inlet and outlet buffers—these components are no longer present, the pictures only illustrate them for reference. Inlet and outlet buffers are no longer included—they are shown for understanding only. / years, not used in the last 2 years due to change of product line.

Condition: good (used), Bluhm Legi-Air 4050 RH Label Printing and Dispensing System Bluhm Legi-Air 4050 RH Label Printing and Dispensing System with Zebra ZE500-4 print module The Bluhm Systeme RH Legi-Air 4050 is a powerful labeling machine with an integrated thermal transfer printer, ideally suited for automatic product labeling in production and logistics processes. The unit is equipped with a print module, applicator, control unit, and numerous interfaces, enabling precise and reliable label application. Motor-driven large roll unwinder Label rolls with a roll diameter of up to 430 mm and 900 meters of label material ensure long, uninterrupted production runs. A tandem operation ensures continuous production. Dispensing head Quickly interchangeable dispensing heads allow for processing label sizes ranging from small nameplates to DIN A5-sized EAN128 shipping labels. The Quick-Change option enables format changes in seconds. Spring-mounted dispensing heads compensate for unevenness on product surfaces, ensuring clean label application. Controller Bluhm Weber Standard Controller Zebra ZE500-4 Print Module Label Printer Ideal for print and apply labeling applications for products, cartons, outer packaging, and pallets in the following areas: • Manufacturing and warehousing • Automotive industry • Pharmaceutical industry • Food and beverage production • Healthcare and beauty industry Standard Features • Printing methods: Thermal transfer or thermal direct • Orientation: right or left • All-metal, industrial-grade construction • 16 MB SDRAM, 64 MB Flash memory • Applicator interface • Transmissive and reflective media sensors • Multi-level Element Energy Equalizer™ (E3™) for high print quality • Real-time clock • Rotatable display • ZPL II™ – universal language for Zebra printers Media Specifications Labels Media thickness (label and liner) • ZE500-4: 0.135 mm to 0.254 mm Media types • Continuous, die-cut, or with a reflective mark Ribbons Maximum roll size • 101.6 mm outer diameter with a 25.4 mm core inner diameter Standard length • 600 m capacity Connectivity • Parallel interface: Centronics®-compatible • Serial interface: RS-232 Dedpfxeibh Tkj Adrocn • USB 2.0 • Internal ZebraNet™ 10/100 • Applicator interface with DB-15F connector • Optional ZebraNet b/g Print Server Fonts/Graphics/Symbologies Fonts and character sets • Zebra Global Printing Solution including Unicode™ • Swiss 721 font standard • Bitmap fonts A to H and GS symbols can be expanded tenfold, • independent of height and width • Infinitely scalable font Ø (CG Triumvirate™ Bold Condensed) can be expanded point by point, • independent of height and width • International character set IBM®-Codepage 850 • With UFST® from Agfa Monotype Corporation • Firmware support for downloadable TrueType™ fonts • Additional fonts available Graphics features • Supports custom fonts and graphics, • including customer-specific logos • Barcode symbologies • Support for all 1D and 2D standard barcodes Barcode symbologies • Support for all 1D and 2D standard barcodes Technical Data Maximum print width • 104 mm Media specifications • Width of labels and liners: 16 mm to 114 mm • Minimum length with rewind: 13 mm • Minimum length without rewind: 6.5 mm • Minimum length in stream mode: 6.5 mm • Maximum length: 990

Condition: excellent (used), functionality: fully functional, Dispenser/Dosing Unit made of stainless steel Djdpfx Asycl Iwodrocn Overall dimensions: 1600 x 600 x 1900 mm Included equipment: 4 pneumatic dosing heads Height-adjustable base The dosing unit is designed for precise dispensing of products in production processes. Equipped with four pneumatic dosing heads, it enables simultaneous portioning of several product streams, significantly increasing the efficiency and repeatability of dosing operations in processing lines. The device is mounted on a height-adjustable base, facilitating adaptation to various types of workplaces and integration with other machines in packaging or filling processes. The pneumatic dispensers operate using air pressure, allowing for precise and hygienic dosing of products with different consistencies, commonly used in the food, cosmetic, or chemical industries.

Year of construction: 2015, condition: excellent (used), The drum follower plate system A280 has the proven Scheugenpflug double-piston pump. This pump only comes into contact with material on one side, while a flushing liquid on the rear ensures that abrasive fillers do not get caught on the seals. With this system, highly abrasive, pasty media can be conveyed continuously and reliably with an unrivaled service life. 2 Component Follower Plate System. Dcsdpfx Adjif Ug Eersn

Condition: excellent (used), I am offering a professional DELO dispensing system – DELO-DIV pilot with a DELO-DIV VD450 manual dispenser. This equipment is designed for precise and controlled dispensing of adhesives and various media in industrial applications. The system is ideally suited for use in: • Electronics manufacturing • Automotive sector • Precision assembly • Laboratories and R&D • High-repeatability technical bonding processes Operation is managed via the DELO-DIV pilot touchscreen panel, which allows: • Saving and selection of dispensing programs • Manual dispensing (manual mode) • Precise adjustment of working parameters • Intuitive operator interface The DELO-DIV VD450 manual dispenser ensures high application accuracy and process stability. — Condition • Used • Fully functional • Normal signs of use • The unit powers on and responds correctly (visible in the pictures) — Set includes • DELO-DIV pilot controller (touchscreen panel) Dedjyc H U Sepfx Adrscn • DELO-DIV VD450 manual dispenser • Cables / connectors as shown in the photos — Additional information • Manufactured in Germany • CE / UKCA marking • Ideal for production facilities and process integrators

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Dcedsyil A Sepfx Adren Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Location - Poland

Condition: excellent (used), ZILLI & BELLINI Automatic Sealing Machine with 12-Piston Filling Unit – Stainless Steel Automatic sealing machine from ZILLI & BELLINI with a 12-piston filling unit, designed to integrate the dispensing of the product and the subsequent hermetic sealing of containers within an automated industrial line. The unit combines a filling system with 12 pistons and an automatic sealing section, allowing both operations to be performed in a synchronized and continuous manner. The piston filling technology is particularly suitable for products whose dispensing requires repeatable volumetric control. Its construction, primarily in stainless steel, along with the complete enclosure of the work areas and the integrated control panel, makes it suitable for professional installations in the food and canning industry. MAIN FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic filler + sealer -Filling unit: 12 pistons -Volumetric dispensing system -Automatic and continuous filling -Automatic container feeding -Synchronized positioning and transfer -Rotary processing system -Dispensing via pistons -Automatic sealing section -Cap feeding / positioning according to configuration -Continuous industrial operation -Construction primarily in stainless steel -Complete enclosure of work areas -Doors with inspection windows -Integrated control panel -Safety guards -Structure on adjustable supports -Integrable into complete packaging lines PROCESS Containers are automatically fed into the machine and transferred to the 12-piston filling unit. The system performs a controlled volumetric dispensing, introducing the pre-set amount of product into each container. Once filling is complete, the containers are automatically transferred to the sealing section. In this second stage, the caps are positioned on the containers, and the corresponding mechanical sealing is performed, resulting in a product that is ready to continue to the subsequent operations in the line. It can be integrated with: -Container depalletizers -Washing / rinsing machines -Product feeders -Cap feeding systems -Conveyors -Weight checkers -Inspection equipment -Pasteurizers -Autoclaves / retorts -Labeling machines -Cartoning machines -Palletizers APPLICATIONS Particularly suitable for canning companies and manufacturers of packaged food products that need to automate the filling and sealing operations simultaneously. The 12-piston system may be suitable for various liquid, semi-liquid, or viscous products, depending on the product characteristics and the specific configuration of the equipment. Container formats, dispensing volumes, compatible products, and the type of sealing will depend on the tooling and configuration currently installed. Dedszxwxfspfx Adrscn The combination of ZILLI & BELLINI technology, 12-piston filling, and automatic sealing provides a compact solution for continuous industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, production speed, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Dodpevnrz Dsfx Adrscn

Condition: used, Year of construction: 2021, Overview  This inline dosing system was manufactured in 2021 by AGATHA (Italy). The AGATHA PRO is a compact automatic unit for precise dosing of liquid stabilizers such as Gomasol and Estabicel in wine production. It can be integrated directly into bottling or filtration lines and ensures accurate, homogeneous dosing through its flow-controlled injection system. The machine is in good condition and ready for use. Technical data  - Application: Dosing of liquid stabilizers in winemaking - Structure: Stainless steel AISI 304 - Dimensions (L × W × H): 160 × 60 × 80 cm - Weight: 140 kg - Control: Touchscreen with dosing software - Power Supply: 230 V, ≈500 W Dcedjyb Tafspfx Adren - Features: Flow sensors, alarms, IP65 protection, easy line integration

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations Dodpfx Adeyc H N Njrjcn ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: used, EOS Transitube DCL 800/30 PM Powder Conveying System / Dosing System for 2 Components Description For sale is a used EOS Transitube DCL 800/30 PM powder conveying system from tim plast Anlagenbau GmbH. The system was developed for the continuous dosing, conveying, and homogenization of two material components. It is suitable for processing powders, granules, and ground materials in the plastics industry. The materials are dosed precisely, mixed via the Transitube conveying system, and continuously fed to the production machine. According to the manufacturer, the DCL series is designed for the continuous dosing and mixing of two components. Due to its robust industrial design and extensive scope of supply, the system is ideally suited for use with extrusion and injection molding machines. Technical Data Manufacturer: transitube / tim plast Anlagenbau GmbH Model: DCL 800/30 PM Designation: EOS Powder Conveying System Material hoppers: 2 × approx. 400 liters Conveying capacity: approx. 50–2,000 kg/h (material dependent) Dosing accuracy: ±0.5 to ±2 % Dosing range: 5–50 % Additive dosing: 0.2–10 % Mains connection: 3/N/PE 400 V AC Frequency: 50/60 Hz Connected power: 2.0 kW Dimensions (approx.): Width: 1,850 mm Depth: 900 mm Dcodpozn H D Nofx Adren Height: 1,320 mm Weight: approx. 180 kg Equipment 2 dosing hoppers with hinged lids Transitube screw dosing system Automatic control cabinet with touch panel Electrical control Conveying and mixing system Pneumatic components Flowserve Automax actuators Conveying motor with gearbox Extensive hose and pipe package Accessories as shown in the pictures Application areas Plastics processing Extrusion Injection molding technology Powder conveying Granule conveying Ground material dosing Material mixing Production automation Condition Used. The system is in good condition with normal signs of wear and tear consistent with its age. The scope of supply corresponds to the photos shown. Scope of supply EOS Transitube DCL 800/30 PM powder conveying system Control cabinet Conveying units Motors Pneumatic components Piping Conveying hoses Extensive accessories as shown in the pictures Shipping Inspection possible by appointment at any time. Loading onto a truck can be arranged. Europe-wide shipping by freight forwarder possible for an extra charge. Subject to prior sale and errors.

Condition: good (used), Smicon AFT 2/1500 Fumigation / Fumigation System Fumigation involves filling a space with a toxic gas to control pests/bacteria. As toxic gases are used, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses in ports, silos, mills), and also in churches to control woodworm. This is a device used for disinfecting spaces. Formaldehyde is heated on the left hotplate and, together with condensed water (right hotplate), is placed into a room via an airflow, where it kills all bacteria. Djdpjdviynsfx Adrscn Former list price: €10,900 net You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used

Condition: good (used), Smicon FTA 1500U-6L – Fumigation / Fumigation System Fumigation involves filling a room with a toxic gas to control pests/bacteria. Since these are toxic gases, special safety measures are required. Fumigation is commonly used in the storage of organic materials (e.g., grain storage, in warehouses at ports, silos, mills), and also in churches to control woodworm. Dcjdpfedviyxsx Adrjn This is a device used for disinfecting rooms. Formaldehyde is boiled on the left hotplate and, together with condensed water (right hotplate), is placed in a room via an airflow, killing all bacteria. Former list price: €9,900 Item condition: used You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2019, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 19/018, Dosing and bagging scale for solids and powders: Dosing machine for solid and powdered products (from 5 to 1,000 grams of coffee). The product, stored in the buffer hopper, is automatically dosed by a two-speed vibrating channel into a weighing basket. The operator can control the dispensing of the dosed product into the container to be filled. It is possible to prioritize either dosing speed or weighing accuracy. The machine is supplied with various funnels of different diameters for powders or solids. Dedpfx Adez Ehm Rsrecn

Condition: used, Year of construction: 2016, For Sale: Complete TU premix bunker installation with accessories. Included: - 5 premix bunkers, micro-dosing system, dosing system 1400 liters per storage tank - 1 micro-dosing system with 5 storage tanks - dust extraction system - other components from Technology Unlimited It has been disassembled, but it is possible to view a similar, operational installation at our location. Dsdpjzlt S Iofx Adrscn The installation can be viewed on-site.

Condition: like new (used), Year of construction: 2016, operating hours: 20 h, We are selling several items of SCA (Atlas Copco) equipment from a production cell that was never installed at the end customer. The operating hours are estimated. As this is a dismantled part of the system, there is no guarantee that the system will run independently and completeness cannot be guaranteed. - 3 x dosing head Djdsurlzzjpfx Adrscn - 3 x control cabinet - 2 x control unit - 3 x drum pump - Various heatable hoses

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 chip extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g. during metal or wood processing). Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amps): 4.6 A Dcsdpjznibwefx Adrjn Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs upon request!

Condition: good (used), Amico Uniflair Climate Cooling System Precision Air Conditioner 7.2 kW SDC0200B Model: SDC0200B Dedpsd Ip Efofx Adrocn Coolant type: Water Fan(s): Fan with forward-curved blades Supply voltage of the unit: 230V/1ph/50Hz OPERATING CONDITIONS Dry-bulb temperature: 24.0 °C Wet-bulb temperature: 17.1 °C Relative humidity: 50% Altitude: 0 m Air static pressure: 20 Pa Inlet temperature of coolant: 7.0 °C Outlet temperature of coolant: 12.0 °C Glycol content: 0% Freezing point: 0.0 °C Coolant flow rate: 1237 l/h Coolant flow rate: 0.34 l/s PERFORMANCE AND FEATURES Total cooling capacity: 7.2 kW Sensible cooling capacity: 6.4 kW Net total cooling capacity: 6.7 kW Net sensible cooling capacity: 5.9 kW SHR: 89.0 % EER (cooling capacity / system power consumption): 13.9 kW/kW Air flow rate of the air conditioner (dry): 1600 m³/h Air flow rate of the air conditioner (dry): 0.44 m³/s Air temperature outlet/unit outlet: 12.9 °C Relative supply air humidity (unit outlet): 90 % Number of fans: 1 Fan(s) speed control: 72 % Power consumption of room unit: 0.5 kW Power consumption of fans: 2.8 A Max. external pressure: 144 Pa Pressure drop of the coil: 16.6 kPa Pressure drop of the 3-way valve: 9.6 kPa Total pressure drop on the coolant side: 26.1 kPa Sound pressure level at a distance of 2 meters in free field measurement: 43.0 dB(A) (at external pressure = 20Pa) DIMENSIONS Air conditioner Height: 1740 mm Width: 550 mm Depth: 450 mm Year of manufacture: 2004 and 2006 Scope of delivery: 1x Amico Uniflair SDC0200B precision air conditioner Item condition: used You can find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Liebert Emerson M31UA cooling system Perimeter cooling for data center environments Cooling capacity: 31 kW Air distribution: Downflow Type: Air-cooled Datasheet available at this link Item condition: used You can find more items – new and used – in our shop! Djdod Ipgkspfx Adrocn International shipping costs available upon request!