Joinery

Schmidler SAB 4 r

Condition: good (used), Year of construction: 1996, KRÜSI chalet building machine / log house production line type CM 40 Manufacturer Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of manufacture 1996 S/N 431 Condition: good, technically checked and cleaned / ready for operation Functional principle Machining of timber for chalet construction / log house production The beams can be processed in one pass - cutting to length - horizontal- and vertical milling of the necks / grooves in one clamping - drilling - milling the face grooves workpiece: - Cutting height max. 200nn - Cutting width max. 250mm Robust construction in welded design. Machine (horizontal and vertical milling unit) with 4 special milling motors, with hardened and ground guides for highest machining accuracy. Carriage guided by dust-protected and preloaded ball-bearing rollers. Working range up to 200 x 250 mm. Completely ready for operation, with contactor control, motors protected by thermal relays. Electrical equipment for voltage 380 V, 50 Hz, with protective bonnets, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tool (folder). With hydropneumatic horizontal and vertical feed electrically controlled, together with the start-up of the milling motors. Rapid traverse and feed infinitely adjustable. Completely wired and installed, including air maintenance unit. Stains with a thickness of more than 14 cm must be processed in two tensions. Such patches have to be re-milled by the amount of the extra thickness. Machine protection bonnets over the moving parts with gas spring weight compensation Machine description / equipped with: 1. sawing unit: Manual feed Spindle adjustment with analogue dimension display Saw blade-Ø max. / bore-o 400 / 30 mmm Carbide tipped with chip depth limiter (synchronous operation) Adjustable riving knife Motor speed min 1 / 2900 Power kW 2,2 2. CM milling unit ( log house unit ) Hydropneumatic feed Spindle adjustment with digital dimension display Horizontal milling unit Cutter Ø 180mm cutter width max.130mm from cutter width 60 mm use only aluminium alloy cutters with reversible cutting edges 2 motors hydro-pneumatic feed kW each 2,2 Hydropneumatic feed Rapid traverse and working feed infinitely adjustable 3. drilling unit: Manual feed Spindle adjustment with analogue dimension display Drill holder collet ER 25 Clamping Ø max. mm 16 Drill Ø max. mm 32 Motor min'1 1450, kW 1,8 4. face milling unit Isdpfeu Uh T Dox Ad Detp Hydropneumatic feed Spindle adjustment with digital dimension display Fraser- Ø max. mm 230 Cutter width max. mm60 Motor min1 / 2900, kW 3,0 2 V-belts SPZ 9,5x1000 La Pneumatic On-site operating pressure min/max MPa (bar) 0.7/1 (7/10) Air consumption Nm3/h 8 Electrical system Operating voltage V / Hz 380, 50 Rated power kW 8.8 -15.8 depending on version On-site back-up fuse A 3 x 25 tr

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m Ijdpjh Ayyqsfx Ad Dotp technical inforamtion under subjet of correction

Year of construction: 2001, condition: ready for operation (used), Saw blade diameter: 750mm, saw blade speed: 2200/min, table dimensions: 1500x1500x900mm, cutting height 90°/45°/30°: 295/200/137mm, motor power: 16kW, length: 1800mm, width: 1500mm, height: 1100mm, weight: 650kg. On-site inspection is possible. Itjdpfjurwy Asx Ad Djp

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, Characteristics of the crosscut saw - Single 500 mm blade on a robotic arm that can be moved in height, length and depth and tilted. - Everything is managed via a Human / Machine touch interface that ensures sorting and optimization of cuts. - The whole system is entirely confined in a box to reduce dust and noise to a minimum. - Motorized loading chain for wood up to 6.50 meters - Loading infeed table with digitized clamp - Automatic piece feeding, automatic feed, trim cut - Long cuts thanks to synchronized movement of the blade pusher - Second digitized clamp for the exit of the wood - Ink jet marking at the exit - Output table with automatic ejection on support arms - Protection grids - Waste recovery by wide belt under the blade - Waste lifting device for dumping - Control and programming panel on touch screen PC and color - Import of files in .btl format - Independent programming console for the inkjet head - Complete casing and CE standards - Minimum wood section : 30 x 50 mm - Maximum section of the wood : 80 x 300 mm or 80 x 260 mm (depending on the speed of the stroke) - Wood length : between 2000 mm and 6500 mm Isdpfxek E Hvue Ad Detp Modes of operation : - Automatic operating mode: from a file with information on the site, the machine automatically optimizes the cuts and indicates to the operator, the order of introduction of the wood for the cutting. The operator unloads the wood on the input table in the given order, the machine cuts it and the operator recovers the cut bars on the output table. - Manual operation mode: The operator keeps full control of the machine movements, and adjusts all axes individually, mode used for maintenance purposes. Power supply : - Three-phase in 400 V / 8.5 kW (11 hp) / 300 mA differential Pneumatic supply : - 6 to 8 bars of dry air pressure, flow rate of 10 m³ per hour with instantaneous peaks connected by minimum D12 rilsan tube Dust suction : - 1 mouth of 160 mm of diameter at the right rear - 1 mouth of 140 mm diameter at the left rear - 1 x 80 mm spigot equipped with an 8 meter hose is recommended for cleaning Wood dimensions: - Max thickness: 80 mm - Maximum height: 260 mm to 300 mm (depending on equipment) - Minimum cutting length: 100 mm - Maximum cutting length: 6500 mm Machine very clean and in perfect working condition

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our Iodpfxsivaryj Ad Dstp many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, total length: 21,440 mm, total width: 3,200 mm, working length: 16,000 mm, Schmidler SAB 4 Very good condition, machine direction from right to left, year of construction 1999 Itsdpfx Aeunl S Eod Djp Cross conveyor, under table tilting cross-cut saw, waste wood pusher, marking devices, combination cutter consisting of main and finger cutter and dovetail cutter, 2 drilling units Workpiece size 300x400 up to timber up to 16m possible Machine length 21440mm Disassembly and transportation by buyer

Condition: excellent (used), Year of construction: 2010, SAFO Carbon snow line - Year of production: 2000 Semi-automatic Itjdsulu Udspfx Ad Dop -length of the entire line 20 meters -additional set of cutters for processing a profile beam in sections of 30 mm to 50 mm The line is 100% ready for operation