Sizing saw

SCM SI 16 WA

Condition: excellent (used), 5.5 kW engine Ground clearance 155 cm Table length 300 cm Uge2Xduy3F Undercutter

Condition: new, Code: N0750 Brand: SCM Model: CLASS SI 400 EP - CE Standard Electronic-programmed circular saw with tilting blade - CE Standard Technical data Blade diameter mm 400 Cav0Rav08G Cutting height mm 140 Programmed blade lifting and tilting Scoring unit Main blade motor Hp 9,5 Scoring unit motor Hp 1,7 Carriage length mm 3800 Start/stop buttons integrated in the sliding carriage Electronic position reader for parallel guide with manual movement

Condition: good (used), SCM SI320 Format Saw Offered for sale: A well maintained SCM SI320 format saw. This machine is ideal for precision work and offers excellent performance for both professional and hobby woodworkers. Specifications: - Model: SCM SI320 - Saw blade diameter: 300 mm - Maximum cutting height: 95 mm - Length roller table: 3200 mm - Cutting width: 1500 mm - Engine power: 5.5 KW (7.5 hp) - Voltage: 400V Fzjhqmo - Tiltable saw blade: 90 - 45 degrees - Speed: 4000 rpm The machine is in very good condition and has always been well maintained. Ideal for cutting large panels and precision work. Location: Ommen, Netherlands Price: €2,850, - ex VAT

Condition: new, Year of construction: 2024, Designed for machining aluminum Smooth-running anodized aluminum format sliding carriage Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic crosscut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table extension as standard, with table extension and eccentric clamp Saw unit made of a robust cast iron ring mold with double swivel segment guide and zero-point swivel for a smooth and perfect cut Large-surface work table made of stress-free gray cast iron On/off switch on sliding carriage High dead weight ensures precision and smooth running Two cutting speeds switchable via inverter Swing-away device for fence under table Cutting width 1270 mm Made in Italy Aluminum format sliding carriage Equipped with thousandfold proven ball contact system Permanently smooth running Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years Holzkraft warranty on wear of the guideways Saw unit with swivel segment guide Permanent precision due to double swivel segment guide 6 years Holzkraft warranty on wear of the swivel segments Dimensions and weights Weight (net) approx. 700kg Connection suction Suction port diameter 120mm Suction port diameter saw blade guard 80mm Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 7,0kW Rated operating mode drive motor S6 Duty cycle drive motor 40% Sliding carriage and table sliding table length 2600mm Format sliding carriage width 360mm Format sliding carriage height 142mm Table length 940mm Table width 560mm table height 900mm Circular saw unit Cutting width with rip fence 1270mm Max. Trimming width left of saw blade 3260mm Trimming length 2600mm Saw blade inclination 90 - 45 Max. Cutting height 90° 136,5mm Max. Cutting height 45° 97mm Diameter saw blade 400mm Saw blade speed 3500/5000min¯¹ Equipment Anodized aluminum format sliding carriage ✔ Handle for sliding carriage ✔ Material roller on the edging frame ✔ Saw parallel fence with round bar guide Fences Professional folding fences Trimming shoe ✔ Cdhi7Z3Qx0 Eccentric clamp ✔ Table widening ✔ Table extension ✔ Saw blade sway protection ✔ Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2019, Cutting height max: 138 mm Saw blade diameter max: 400 mm Scoring aggregate: Yes Gxc0Pgu Main motor power: 7 kW Controlled axes: Yes Saw blade height adjustment: electro-motive Saw blade tiltable: electro-motive Motorised rip fence: Yes Digital display of angle: Yes Control: SCM READY Conformity marking: CE mark

Condition: new, Year of construction: 2024, CIRCULAR SAW model SCM SI 400 EP NEW machine in prompt delivery year 2024 CE regulation: YES CN control "READY" 2 controlled NC axes (lifting and tilting of the blade) - blade lifting and tilting management - tool data settings with automatic correction of the height of the blade with respect to the inclination - electric and automatic NC mode with 99 storable programs digital display on the parallel guide n.02 reversible stops on the squaring guide extension floor out with scoring unit : YES max diameter saw blade 400 mm length of the squaring carriage mm 3200 main blade motor power Hp 9.5 scoring unit motor power Hp 1,7 Bspre32Mw2 3 main blade rotation speed rpm. 3000 /4000 / 5000 volt. 380/50

Condition: used, Year of construction: 1985, Machine/vehicle number: AB 1061, Lagerort: Lieferant Unjktldorj

Condition: new, Code: N0764 Brand: SCM Model: NOVA SI X - CE Standard Circular saw with +/- 46° double blade tilting with 3 controlled axis - Version READY 3 UP - CE Standard equipped with following optionals : Start buttons integrated into the sliding table Squaring frame with Compex device Bdpwfkioac Squaring fence with n° 2 LCD displays for position reading Technical data: Max. saw blade diameter with mounted scorer mm 400 Maximum saw blade projection from table to 90°/+46°/-46° mm 136/97/60 Cutting width on rip fence mm 1270 Squaring capacity mm 3200 Three-phase motors starting from kW/Hz 7 (8) / 50 (60)

Condition: used, Engine power: 12.24 HP (9.0 kW), Year of manufacture: 2021, Cutting height (mm): 200 mm, Cutting width: 1500 mm, Scoring unit: Yes, Saw blade tilt 46 to +46°, Easy Touch control, Format cuts 3200mm, Suction nozzle diameter 120mm Beiyubi

Condition: new, Basic equipment and accessories 10-year guarantee on the guide system of the saw carriage - Saw carriage with anodized aluminum profile guide made of hardened, ground and flanged steel guides - Saw carriage length 3200mm - "READY" electronic control; 2-axis control (3rd axis on request) with: - Height adjustment and inclination of the saw unit (control of the rip fence on request) - Management of the tool data with automatic correction of the Cutting height in relation to the angle of inclination of the saw blade - Manual, semi-automatic and automatic mode with 99 storable work programs - Additional functions: calculator and hour meter - Trimming frame for quick positioning of the stop miter cuts - Table extensions in the outlet - Cutting length at the rip fence 1270 mm - 2-axis control with 99 programs Motor 7kW 50Hz (8kW 60Hz) - Motor with direct connection with push buttons - Three main saw blade speeds - Scoring unit with independent motorization, externally adjustable and Stops for easy saw blade positioning Security/Protection - Emergency stop button on the front - Emergency stop button on the side near the rip fence (Version CE) - Thermal protection switch - Saw blade swing protection (version CE) integrated suction, suction nozzle with a diameter of 80 mm - Saw blade swing protection with integrated suction, suction nozzle with 80 mm diameter - Automatic motor brake on the main saw blade (CE version) - Lockable main switch - 110 V auxiliary circuit Dzwvwm - CE Declaration of Conformity (CE version) Technical specifications Max cutting height at 90° (mm) 140 with blade 400 Max cutting height at 45° (mm) 97 with blade 400 Saw blade tilt (degrees) 45 Programmed lifting and swiveling of the saw blade unit Saw blade speed (rpm) 3000- 4000- 5000 Scorer speed (rpm) 8500 Main engine power (S6 -40%) kW (hp) 50 Hz 7 (9.5) Scoring unit power (S6 -40%) kW (HP) 50 Hz 1.3 (1.7) Format cuts: - with trolley 1600 (mm) n.a. - with trolley 3200 (mm) 3200x3200 Cutting width for parallel cuts (mm) 1270 Suction nozzle diameter: - on frame (mm) 120 - on the saw blade guard (mm) 80 - on the riving knife (mm) n.a. Net weight base machine (kg) 1050 109999 Execution according to safety regulations R10078 nova si 400ep CE version 930731 volts 400 EU 931201 Frequency 50 Hz 570343 Digital readout for rip fence Complete with: - Digital display and magnetic tape 570133 Motor 9kW 50Hz (11kW 60Hz) with automatic star/delta switch kW9 HP12 Hz50 (kW11 HP15 Hz60) 083202 base 109993 MACHINE LANGUAGE: German

Condition: good (used), ELECTRIC SQUARING MACHINE CART 3800 MM. BLADE 400 MM. ENGINEER INCREASED SQUARING WIDTH ELECTRIC HANDLING. Bdp2Nnope BLADE LIFTING AND TILTING PARALLEL GUIDE

Condition: new, Year of construction: 2024, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm B7B227Ikxj lowerable 180 mm tenon milling 275 mm K

Condition: used, Year of construction: 2020, Machine/vehicle number: AB00014854, Sonderpreis für Ausstellungsmaschine - Listenpreis 47.660,00 € - zzgl. Fracht - zzgl. Inbetriebnahme BEIDSEITIG SCHWENKBARE FORMATKREISSÄGE class si x| HAUPTMERKMALE | DAS BEIDSEITIG SCHWENBARE SÄGEAGGREGAT: SCHWENKBEREICH VON 46° UND PROGRAMMIERBAR ELEKTRISCHE SÄGEBLATTVERSTELLUNG| | INNOVATIONEN IM DIENSTE DES BEDIENERS: NEUES AUTOMATISCHES EINSTELLSYSTEM FÜR DEN SÄGEBLATTSCHUTZ.| | EASY: MAXIMALE ZUVERLÄSSIGKEIT UND EINFACHE BENUTZUNG| Technische Daten| class si x| Max Schnitthöhe bei 90° (mm)| 200 mit Sägeblatt 550mm| Max Schnitthöhe bei +45° (mm)| 130 mit Sägeblatt 550mm| Max Schnitthöhe bei -45° (mm)| 105 Sägeblatt 550mm| Sägeblatt Schwenkung (Grad)| -46 ÷ +46| Heben und Schwenkung des Sägeaggregats| programmiert| Steuerung/Arbeitshöhe Anzeige| Ulmbhu9I9F Easy| Sägeblattdrehzahl (U/min)| 3000 ÷ 5000 (Inverter)| PHauptmotorstärke kW (Ps)| 9 (12) Hz50| Formatschnitte: - mit Wagen 3200 (mm) - mit Wagen 3800 (mm)| 3200x3200 3800x3200| Schnittbreite mit Parallelanschlag (mm)| 1270| Absaugstutzen Durchmesser: - am Gestell (mm) - am Sägeblattschutz (mm) - am Spaltkeil (mm)| 120 100| Grundausstattung - 10 Jahre Garantie auf das Führungssystem des Sägewagens - Schiebesägewagen mit eloxiertem Aluminiumprofil mit Führung aus gehärteten, geschliffenen und eingebördelten Stahlführungen - Besäumwagen Länge 3200mm - Besäumrahmen für die Schnellpositionierung des Anschlags bei Gehrungschnitten* - Teleskopanschlag mit 2 Anschlagklappen und Skala in Benutzerrichtung* Teleskopsupport* Losrolle für das Plattenbeladen- und Ausladen - Manueller Parallelanschlag mit Ablesung der Anschlagposition über Lineal mit Gleitung auf Stahlführung 50mm und mikrometischer Einstellung - Exzenterspannvorrichtung - Tischverlängerungen im Auslauf - Elektronische Steueurung "EASY". Beinhaltet:* Elektroniksteuerung mit 7" LCD Farbbildschirm im 16:9 Format * Einstellung der Spindelhöhe und der Spindelneigung* Bedienerhilfe zur Ausführung von komplexen Schnitten* Werkzeuge Database Verwaltung* 300 Programmplätze - Motorleistung 9kW (12Ps) 50Hz - 11kW (15Ps) 60Hz - Inverter für elektronische Drehzahlregelung von 3000 bis 5000 U/minmit automatischem elektronischem Direktstart des Hauptmotors:* Drehzahlanzeige von der Steuerung* Drehzahlwahl über Schaltpult mit Bezug auf die Sägeblatt Datenbasis* elektronische Motorbremse Sicherheit/Schutz - Notaus-Taster an der Vorderseite - Notaus-Taster seitlich im Bereich Parallelanschlag (Version CE) - Mikroschutzschalter an der Blattabdeckung (CE Ausf.) mit Schnellverschluss - Thermoschutzschalter - Sägeblattpendelschutz mit integrierter Absaugung, Haubedurchmesser 100 mm - "AP System" zur automatischen Positionierung

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, Cutting height (max.): 200 mm, Saw blade diameter: 550 mm, Cutting width at rip fence: 1,270 mm, Cutting length (max.): 3,200 mm, Main saw diameter: 550 mm, Height adjustment type: electric, Overall weight: 1,068 kg, Extraction nozzle diameter: 120 mm, Type of motor: three-phase motor, Type of input current: three-phase, Input voltage: 400 V, Pivoting range: 46 °, Input frequency: 50 Hz, Motor voltage: 400 V, Power: 7 kW (9.52 HP), Equipment: Scorer, SCM class si 550ep Saw blade diameter of 550 mm. The best solution for woodworking companies. Automatic adjustment system for the saw blade guard The saw blade pendulum guard is positioned via the exclusive "AP system" depending on the saw blade tilt (SCM solution). This makes switching between cuts with different inclinations even faster and safer, without the operator having to change the machine settings. Cg3Ouzonfm Saw unit - for a perfect cut: Maximum torsional rigidity and complete freedom from vibration thanks to the closed ring structure of the saw unit, which ensures perfect alignment of the saw blade. "Ready": Electronic control - for quick and easy control of all machine functions: Height adjustment and inclination of the saw unit, control of the rip fence, display of the saw blade speed, operating hours counter and calculation functions. Practical use and safety are guaranteed thanks to the programmable rip fence with guide on a sturdy round bar and movement transmission via a steel cable. Reading of the fence position via magnetic tape.

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, Machine/vehicle number: KK00032136, CE safety standards Max diameter of main saw blade 400 mm Speeds of main saw : 3500/5000 r/min Saw carriage 3200 mm Power motor main saw : 9,5 HP (7 kW) Front zipper saw blade Dpf3Ez Speed presaw : 9200 r/min Cutting width 1270 mm Mitre guide

Condition: reconditioned (used), Year of construction: 2001, Functionality: fully functional, Machine/vehicle number: AB141760, Cutting width (max.): 1,500 mm, Cutting width at rip fence: 1,500 mm, Power: 7.5 kW (10.20 HP), Sliding table length: 3,200 mm, Equipment: Scorer, SCM sliding table saw, model SI 400 E Connected load 380V Main motor 7,5kW Scoring motor 0.75kW Length of trimming carriage 3200 mm Cutting width 1500 mm Table extension 840 x 320 mm Parallelogram guard with wide and narrow hood Scoring unit manual adjustment C92Kuym electric height adjustment electric swivel with siko display Suction connection 1x100mm 1x120mm

Condition: used, Year of construction: 1995, Panel saw SCM SI150, approx. 200 cm x 340 cm x 100 cm, SN. 004708, 380 V, year 1995, blade can be swiveled 45° Gn03I0

Condition: new, Year of construction: 2024, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° Yz7F32 helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: used, Year of construction: 1995, Machine/vehicle number: AB / 095860, Vorritzer Gpdifo Sägeblatt DM max. 300 mm Drehzahl 4000 U/min Ritzsägeblatt DM max. 100 mm Gewicht: 715 kg Lagerort: Lieferant

Year of construction: 2024, Condition: new, New machine Year of construction 2024 Equipment and technical data: L'invincibile SI X - SHAPE CIRCULAR SAW WITH DOUBLE SAW BLADE INCLINATION L'invincibile SI X CE version Volt 400 EU Frequency 50 Hz Scoring unit with independent motorization Signalization LED of the scoring unit in operation Main saw blade diameterm550 Max. Saw blade cutting height at 90°/+46°/-46°mm200/130/105 Cutting width at rip fencemm1500 Bmxlar2Qg8 Format cuts with carriagemm3200 ÷ 3800 x 3200 Three-phase motorkW/Hz9 / 50 Availability: short term Location: Hochheim

Condition: used, Functionality: fully functional, Maximize your woodworking capabilities with the premium duo package of SCM ME 35 Edgebander and Nova SI 40 Panel Saw. Located in Belgium, this combined offering enhances your workshop's efficiency and precision. The SCM ME 35 Edgebander features a spacious work table of 3000 x 525 mm, perfect for handling varied edgebanding applications. It efficiently operates at a feed speed of 7 m/min, accommodating rolled edges from 0.4 to 3 mm in thickness, ensuring both speed and precision in edge finishing. Parallelly, the SCM Nova SI 40 Panel Saw is equipped with a robust 400 mm diameter blade, which includes scoring capabilities for impeccably clean cuts. With a squaring capacity ranging from 2600 to 3200 mm and powered by a strong 5 kW motor, this saw guarantees superior cutting performance, making it a dependable tool for precise and demanding tasks. Technical specifications: ME 35 work table dimensions: 3000 x 525 mm ME 35 thickness of rolled edges: 0.4 - 3 mm ME 35 thickness of edges in strips: 5 mm ME 35 panel height: 8 - 50 mm ME 35 min. panel length/width: 190/110 mm ME 35 feed speed: 7 m/min Nova si 40 diameter saw blade with scoring installed: 400 mm Nova si 40 projection saw blade with respect to the table at 90°/45°: 138/98 mm Nova si 40 cutting width on parallel guide: 1270 mm Bnx8H7Wfe9Y Nova si 40 squaring capacity: 2600 - 3200 mm Nova si 40 three-phase motor power: 5 kW Included with the Machines: -Different saw blades. -2x front zipper. -Hot melt glue for the edgebander. -Dust extraction with all tubes. ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Condition: new, Year of construction: 2024, HOLZKRAFT S 400 elite S 32 MA Professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504757 Machine equipped with : - motorized height adjustment and tilting of the saw unit - Digital display for tilting - Integrated on/off switch of the motors in the edger carriage Standard equipped with scoring unit with sepa- drive motor, adjustable from the outside - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage 330 x 146 x 3200 mm max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Bznig3Vu Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Suction nozzle Ø saw blade guard 60 mm Machine ex stock Bitburg - free loading -. Special price for the stock machine subject to prior sale

Condition: as good as new (ex-display), Year of construction: 2024, HOLZKRAFT S 400 elite S - professional sliding table saws in heavy-duty design with scoring aggregate and format sliding carriage made of anodized aluminum. Art. No. 5504754 Standard with scoring unit with sepa- drive motor, adjustable from outside. - Lightweight anodized aluminum sliding carriage - Cast iron sawing unit with double segment guidance (double cradle) and zero-point swivel zero-point swiveling - High dead weight ensures precision and smooth running - 400 mm saw blade, cutting height 138 mm (even with pre-scorer installed) - Scorer as standard - Saw blade anti-sway guard standard - aluminum format slide 3200 mm with very wide sliding carriage (330 mm) - therefore more supporting surface Technical data Table dimensions 940 x 560 mm Table height 900 mm Capacity 3200 mm Dimensions format sliding carriage 330 x 146 x 3200 mm max. cutting height 90°/45° with scoring 138 /98 mm max. clearance width left of saw blade 3260 mm cutting width with rip fence 1270 mm Saw blade inclination 90° - 45° max. saw blade diameter Ø 400 mm Saw blade diameter scoring Ø 120 mm Main saw blade speed 4000/5000 min-1 Speed scoring saw blade 9200 min-1 Motor power 400 V / 50 Hz / S6 - 40% 7 kW (9,5 HP) Motor power scoring 0,55 kW (0,75 PS) Suction port diameter 120 mm Pj9Ul8Sue Suction nozzle Ø saw blade guard 60 mm Machine ex stock Bitburg - free loading -. Special price for the stock machine subject to prior sale

Condition: new, Year of construction: 2024, Control unit with electronic display for saw blade tilting and lifting Cast iron saw unit guarantees torsional rigidity and vibration-free operation Easier board feeding due to large edging frame with roller Telescopic ruler with two professional folding stops Excellent cutting precision - sliding carriage is guided with high precision and smooth running by a ball contact system that has been proven thousands of times scoring unit equipped with its own drive and easily adjustable from outside Two-position saw blade pendulum protection manually adjustable Two saw blade speeds selectable (option) Crosscut fence with digital display (option) Made in Italy Aluminium sliding table Equipped with ball contact system proven a thousand times Permanently smooth-running Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years wood power guarantee on wear of the slideways Saw unit with swivel segment guide Permanent precision due to double swivel segment guide 6 years wood power guarantee on wear of the swivel segments Dust extraction connection Suction socket diameter 120 mm Suction socket diameter saw blade protection 80 mm Electrical data Drive motor power 7 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Bhsktatcdi Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 1270 mm Max. Cutting width left of saw blade 3260 mm Trimming length 3200 mm Saw blade inclination -46 - 46 ° Max. Cutting height 90° 1

Condition: new, Year of construction: 2024, minimax si 400es 32 M A 3 UP In heavy professional version with scoring unit and format sliding carriage made of anodized aluminum Art:No. 5504765 Dimensions and weights Length approx. 3710 mm Height approx. 1717 mm weight approx. 745 kg Connection suction Suction port diameter 120 mm Suction port diameter saw blade guard 80 mm P0Dr2 Electrical data Power scoring motor 0,55 kW Power drive motor 7,0 kW Supply voltage 400 V Mains frequency 50 Hz Circular saw unit Cutting width with rip fence 1270 mm Max. Trimming width left of saw blade 3260 mm Trimming length 3200 mm Saw blade inclination 90 45 °. Max. Cutting height 90° 136,5 mm Max. Cutting height 45° 97 mm Explanation Max. cutting height Independent of scoring device Diameter saw blade 400 mm Explanation Diameter of saw blade Independent of scoring unit Saw blade speed 3500/5000 min¯¹ Sliding carriage and table Length of sliding table 3200 mm Width of sliding table 360 mm Height of sliding table 142 mm table length 940 mm table width 560 mm table height 900 mm Scoring unit diameter saw blade 120 mm Saw blade speed 9200 min¯¹ Scoring unit equipped with its own drive and easily adjustable from the outside Smooth-running and precise format sliding carriage made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened, 10-year warranty on wear of the guideways Large table extension (longitudinally adjustable) with material roller on telescopic arm Extendable telescopic cross-cut fence with two folding stops Precise rip fence, foldable for large panels, with quick clamping and integrated fine adjustment Table widening, table extension and eccentric clamp as standard equipment Sawing unit made of a robust cast iron ring with permanently precise dual pivoting segment guide and zero-point pivoting for a smooth and perfect cut, 6-year Holzkraft warranty on wear of the pivoting segments Large-surface work table made of stress-free gray cast iron High dead weight ensures precision and smooth running Equipped with powerful three-phase motor Version M: Height adjustment and tilting of the saw unit electrically, digital display for tilting Version A: On/off switch on the sliding carriage Version M A 3: Programmed control of the saw blade height and tilt and the position of the rip fence, stepless positioning of the rip fence via switch or automatic positioning system, position display via encoder, adjustment via ball screw, incremental adjustment possibility UP version: swivelling control panel at eye level Made in Italy Scope of delivery: Anodized aluminum format sliding carriage Material roller at the extension arm Saw parallel fence with round bar guide Table extension Table extension Folding stops Trimming shoe Eccentric clamp Handle for sliding carriage Saw blade pendulum protection Motorized height adjustment and tilting of the saw unit digital display for swiveling integrated on/off switch of the motors in the edger carriage READY3" version (3 axes) Swiveling control panel at eye level Location: Ex stock 54634 Bitburg Immediately available - Storage machine -