Travelling column milling machine
Soraluce SORAMILL FR 6000

Name: Soraluce SORAMILL FR 6000
Brand: Soraluce
Availability: InStock

Year of construction

2004

Condition

Used

Location

Lontzen

Travelling column milling machine Soraluce SORAMILL FR 6000

Show map

Machine data

Machine type:: Travelling column milling machine

Manufacturer:: Soraluce

Model:: SORAMILL FR 6000

Year of construction:: 2004

Condition:: good (used)

Price & Location

Location:: Zenobe gramme strasse 8, 4710 Lontzen, Belgique

Call

Technical details

Travel distance X-axis:: 6,000 mm

Travel distance Y-axis:: 1,500 mm

Travel distance Z-axis:: 3,600 mm

Details about the offer

Listing ID:: A163-49822

Update:: 29.08.2025

Description

Travels:
X-axis (lengthwise): 6.000 mm
Y-axis (cross): 1.500 mm
Z-axis (vertical): 3.600 mm
W-axis (Table): 2.000 mm

Spindle speeds in 2 steps: 20 up to 4.000 rpm
Torque: 1.410 Nm
Clamping force: 20.000 N
Feed rates X/Y/Z: 2 up to 12.000 mm/min
Rapid traverse X-/Y- and Z-axis: 20.000/15.000/25.000 mm/min
Drive of the milling spindle at 100% ED: 37 kW

EQUIPMENT:
CNC-controlled hydrostatic rotary and sliding table,
Brand: RÜCKLE, Type: PKTF 8, Year of construction: 1996
-Clamping surface: 2.980 x 3.500 mm
-V-axis: 2.000 mm
-Table load approx.: 30 tons
Iodpfstw Tx Tsx Ac Hjik

120-position tool changer
-Tool diameter max.: 125 mm – with free adjacent seats: 250 mm
-Tool length max.: 400 mm
-Tool weight max.: 30 kg
Tool holder (DIN 69871 Form AD): ISO 50

Mobile operator platform
Electronic hand wheel HR 420
Chip conveyor
3D thermal expansion compensation
Z-axis with level control
Tapping without compensating chuck (ratio 1:1)
Touch probe system M&H 20.00 wireless
Full protection cabin + movable chip protection wall for the rotary table (Setup side/working side)
4-fold milling head changer / Pick-up station

1 piece of Universal milling head , 1° x 2,5° (indexing in the CNC programme)
360 Rear level positions / 144 Front level positions
1 piece of Horizontal milling attachment
1 piece of Universal milling head / Fabrikat: HENNINGER, Type: 880-40 – ISO 40

Internal and external cooling through the spindle

Total connected load: 75 kVA
Machine weight: 36,2 tons
Space requirement (Length x Width x Height) including RÜCKLE table approx.:
12.435 x 8.420 x 5.085 mm

Documents

16349822-01.pdf
16349822-02.pdf

Seller

Registered since: 2003

10 listings online

Call

Send inquiry

Telephone & Fax

+32 87 71... show

+32 87 56... show

Fax:

These listings may also fit your interest.

Listing

Vertical machining center HELLER FT 8000

Contamine-sur-Arve

7,946 km

Vertical machining center
HELLERFT 8000

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] Ijdpfjuhb D Aex Ac Hjik - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

See details

Listing

Milling Machines - A montante mobile FPT TESSEN EVO35

Matelica (MC)

8,557 km

Milling Machines - A montante mobile
FPTTESSEN EVO35

Call

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3500 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3800 x 1000 mm HEAD: A/B AXIS AUTOMATIC ; MILLESIMAL POSITIONING ; ISO 50 ; 5000 rpm; 34 kW TOOL MAGAZINE: CHAIN-TYPE ; 40 POS Isdpjwla Hzjfx Ac Hjik CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 40 Bar WEIGHT: 35020 Kg OVERALL DIMENSIONS: 8760 x 4950 x 3780 mm ACCESSORIES: SWARF CONVEYOR ; LASER TOOL SETTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

See details

Listing

Planer-Type Milling M/C - Double Column ZAYER KPU-4000 AR

Lauchheim

8,007 km

Planer-Type Milling M/C - Double Column
ZAYERKPU-4000 AR

Call

Condition: used, Year of construction: 2000, x-travel 3.700 mm y-travel 3.050 mm z-travel 1.000 mm Control HEIDENHAIN TNC-430 PA distance between columns 2.300 mm 1.175 mm rapid travel x/y/z 25.000 mm/min feeds 15.000 mm/min tool taper ISO-50 - DIN 69871 table weight 20.000 Kg Iijdpfjwg Hrgex Ac Hsk spindle drive 37 kW milling head -swivable +/- 45 ° milling head AB Achse 360.000 pos. Tools changer 30 fach/tools Chip coveyor Ink. Internal cooling system 20 bar table-size 4.000 x 1.800 mm weight of the machine ca. 42 t

See details

Listing

Buderus SB615 output 510KW gas or oil burner possible Buderus SB615 Leistung 510KW Gas oder Ölbrenner möglich Buderus SB615 Leistung 510KW Gas oder Ölbrenner möglich

Neumarkt

8,053 km

Buderus SB615 output 510KW gas or oil burner possible
Buderus SB615 Leistung 510KW Gas oder Ölbrenner möglichBuderus SB615 Leistung 510KW Gas oder Ölbrenner möglich

Call

Listing

Boiler,Buderus Logano SK735-830Kw Viessmann,ir14,5 Buderus Logano SK735-830Kw Viessmann Buderus Logano SK735-830Kw Viessmann

Neumarkt

8,053 km

Boiler,Buderus Logano SK735-830Kw Viessmann,ir14,5
Buderus Logano SK735-830Kw ViessmannBuderus Logano SK735-830Kw Viessmann

Call

Listing

CNC travelling column bed-type milling machine Soraluce FL 8000

Saterland

7,599 km

CNC travelling column bed-type milling machine
SoraluceFL 8000

Call

Condition: like new (used), Year of construction: 2014, 1 as-new CNC travelling column bed type milling machine Manufacturer: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 1800 mm C-axis travel: 360 degrees Table clamping surface: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Speed range up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine Controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Through-spindle coolant (IKZ) Iiedpowzx Ntefx Ac Hek Indexing clamp Vertical carousel rotary table D=1600 mm: 250 rpm Clamping field 6000 x 2000 mm Planing slide, etc.

See details

Listing

Travelling column milling machine FPT Industrie SPIRIT 140

Düsseldorf

7,655 km

Travelling column milling machine
FPT IndustrieSPIRIT 140

Call

Condition: used, Year of construction: 2014, - - - - - travels - - - - - - - - - - - travel -x axis 10.000 mm travel -y axis 1.500 mm travel -z axis 4.000 mm - - - spindle - - - - - - - - - output 62.5 kW turning speed range 262 - 4.000 U/min Torque 2.280 Nm - - - table - - - - - - - - - Size of table plate 2x (2.500 x 3.000) mm longitudinal travel 2.000 mm max. load 30.000 kg solution 0,0005 ° solution 1,8 sek. table turning speeds 1,5 U/min - - - further technical details - - - - - - control Siemens 840 Dsl numbers of positions in the tool changer 80 tool taper ISO 50 max. feed 25.000 mm/min - - - T-slots - - - - - - - - - size of T-slots (DIN 650) 28 mm T-slot - distance 225 mm Milling machine | SPIRIT 140 - 2014 equipped with two HYDROSTATIC rotary boring tables (TRT30). The machine has only approx. 9.900 H working hours. Equipment: - Hydrostatic guideways - Cooling system - Handwheel with radio transmission (HBG 800-DP) - ITC (40 bar) - Tool changer (80 pcs. | ISO50) - Magazine for changing the milling heads with 3 places - Infinitely positionable universal head - Horizontal spindle extension (long version) - chip conveyor - Laser probe with software for tool measurement and breakage control - Radio measuring probe (M&H) - Pendulum processing with partition The machine is in very good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Iedpfx Aswrztvoc Hoik A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SPIRIT-140 | SPIRIT140"

See details

Listing

Milling Machines - A portale FPT DINOX 350IAT

Matelica (MC)

8,557 km

Milling Machines - A portale
FPTDINOX 350IAT

Call

Year of construction: 2018, condition: ready for operation (used), - USED - 5-AXIS BRIDGE-TYPE CNC MILLING MACHINE LONGITUDINAL TRAVEL: 2500 mm TRANSVERSAL TRAVEL: 3500 mm Isdswla Hnepfx Ac Hsik VERTICAL TRAVEL: 1300 mm RAPID FEEDS L-T-V: 40 m/min TABLE SIZE: 3500 x 2500 mm HEAD: A/B AXIS AUTOMATIC ; A-axis ±185° - B-axis ±270° ; HSK A100 ; 12000 rpm TOOL MAGAZINE: CHAIN-TYPE ; 64 POS CONTROL UNIT: HEIDENHAIN TNC640 WEIGHT: 51370 Kg ACCESSORIES: HIGH PRESSURE COOLANT ; SWARF CONVEYOR ; LASER TOOL SETTER ; PAPER FILTER ; TOUCH PROBE ; PORTABLE HANDWHEEL

See details

Listing

Centerless Belt grinding tube finishing Löser RP-S 371

Dietzenbach

7,849 km

Centerless Belt grinding tube finishing
LöserRP-S 371

Call

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. Isdpfxjtmqi Ds Ac Hoik The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

See details

Listing