Upstroke Cutting Machine

Stanztechnik Glaser GmbH USC 5300

Condition: reconditioned (used), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individually switchable top heating elements - Individually switchable bottom heating elements Ksdowf Dvaopfx Agdjww - Parallel clamping frame - Pneumatic motor locking for the upper reduction frame - Cylinder locking for the lower reduction frame - 4 cooling fans - Adjustable vacuum for the lower table via cascade control - Pre-blow and demolding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-change system for tools Sheet feeding: - Automatic motorized lifting of the film transport chain - With pneumatic quick-clamping system for vacuum plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional preheating retrofit: - Pneumatically moved top heater, complete zone control, each emitter individually switchable via toggle switch - Pneumatically moved bottom heater, complete zone control, each emitter individually switchable via toggle switch - Temperature control of top and bottom heating via separate heating controllers in the BE control cabinet (temperature setting not via UA control panel) Optional retrofit for roll processing: - Cross cutter and feeding rollers in feed area - RO 800 roll stand

Condition: reconditioned (used), functionality: fully functional, Plate size: 1000 x 1500 mm Kwsdowf D S Uepfx Agdew Forming area: 960 x 1460 mm Drawing depth: 600 mm If you would like further details or a quote, please contact us.

Condition: used, TECHNICAL DETAILS - Plate diameter : 348 [mm] - Part dimensions (rings) : approx. 70 [mm] - Part dimensions (full) : approx. 40 [mm] - Remaining work thickness : approx. 5 [mm] EQUIPMENT Ksdpfjug U Dmex Agdeww - Same as on photos

Condition: good (used), Year of construction: 2022, operating hours: 1,759 h, turning length: 530 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, overall weight: 5,000 kg, Technical Data Total operating hours: 1759 h Spindle hours: 1130 h Control system: DMG MORI SLIMline® multi-touch control (19" / Operate SIEMENS) Max. turning diameter: 320 mm Max. turning length: 530 mm Max. bar capacity: 65 mm Travel X-axis: 242 mm Travel Y-axis: 80 mm Travel Z-axis: 540 mm Max. spindle speed: 5000 rpm Spindle drive: 16.5 kW Machine weight: approx. 5 t Footprint: m Standard Equipment Ergonomic control panel DMG MORI SLIMline® Main spindle: A2-6 with AC motor Drive power: 11 / 16.5 kW (100/40% duty cycle), 5000 rpm 12-station servo turret: VDI 30 mounting, with 12 driven tool stations and precise Trifix® interfaces (DIN5480 coupling) Direct measuring system: X-, Y-axis Chip pan Hollow clamping device: max. bar capacity D65 mm Sub spindle A2-5, executed as ISM 63 motor spindle with hydraulic clamping device, Drive power: 12.6 / 16.2 kW (100/40% duty cycle), 5000 rpm External electronic handwheel Y-axis: +/- 40 mm Kjdoyuy Enspfx Agdoww DMG MORI loTconnector Special Equipment - Bar package & interface includes: - Workpiece removal device for parts up to D65 x 200 mm length, max. workpiece weight 3 kg, parts tray in front of the machine (outside work area). - Interface for bar feeder or bar loading device (MG MORI standard interface) - Chip conveyor, right-side discharge in place of chip tray - 4-color signal lamp - Hydraulic 3-jaw chuck, SMW KNCS-N 225-66 with quick-change system - Collet chuck HAINBUCH SPANNTOP size 65 - Differential pressure clamping for sub spindle - External chuck rinsing for sub spindle - Automatic workpiece ejector for sub spindle with internal coolant supply for clamping device rinsing - Hydraulic 3-jaw chuck SMWBD-175 for sub spindle - Coolant system 5-20 bar Option includes: - High-pressure pump, 5-20 bar (adjustable) - Dual cartridge filter for coolant - Coolant spray gun 5 bar - Pre-installation for oil mist extractor Option only includes mechanical and electrical pre-installation for AFS 60, diameter: 200 mm - Manual tool measurement device in working area, make: MARPOSS - Automatic loading magazine for short bars IEMCA KID80/16, bar capacity D65 Material pusher D=12 mm, D=15 mm, D=21 mm, D=26 mm Interface: DMG MORI standard Guide rails for movement along spindle axis Color: DMG MORI standard Available functions for bar feeder: - Bar feed M69 - Bar change M65 - Handshake M66 - Parts conveyor Parts conveyor in front of the machine with left-side discharge instead of parts tray. Conveyor located outside the working area All information without guarantee.

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Kwjdpfxjx D E U Sj Agdow Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02 2406, GEISS DU 2400 X 2400 T8 YEAR OF MANUFACTURE: 2002 SERIAL NUMBER: 02 2406 Kwedsyin Ugopfx Agdsw TOTAL POWER CONSUMPTION: 517.9 kW RATED CURRENT: 750 A HEATING POWER INPUT (upper - lower): 462.9 kW RATED VOLTAGE: 230/240 V FREQUENCY: 50 Hz TOTAL WEIGHT: 141.1 kN AIR CONSUMPTION: 3315 liters/cycle AIR CONNECTION: 6 x 10/5 to 8 x 10/5 Pa WATER CONNECTION: min. 1.5 x 10/5 to max. 2.5 x 10/5 Pa A Geiss large-format vacuum thermoforming machine is available. Minimum panel cutting: 1100 mm / 1300 mm, maximum panel cutting: 2100 mm / 1800 mm, maximum forming depth: 620 mm. Additional sheet format 1: min. 850 mm / 750 mm, max. 1850 mm / 1250 mm. Additional sheet format 2: min. 1050 mm / 800 mm, max. 2050 mm / 1300 mm. Includes a separate loading unit with pneumatic panel separation equipment, automatic aligner for longitudinal and crosswise sheet cutting, pneumatic pusher for removing molded parts from the loading table, fully automatic central lubrication system for the loader, and several interchangeable pallets for window panel sets. Documentation available. On-site inspection possible.