Tipper

Stas

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, total width: 2,550 mm, Equipment: ABS, bioSTAR 91.3 cbm Basalt Grey Chassis Type: Moving Floor Kingpin Load (National, t): 12 Axle Load (National, t): 8 Axle Spacing (mm): 1310-1310 Fifth Wheel Height (mm): 1150 Chassis Width (mm): 1200 Loading Width (mm): 2475 Chassis Series: 135 Gross Vehicle Weight (technically permitted): 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Moving Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (m³): 91.3 Overall Width (mm): 2550 Overall Length (mm): 14000 Chassis Tyre Size: 385/65R22.5 Chassis Neck Height (mm): 217 Axles: JOST Brake Version: Disc Brakes Brake Type: JOST - DCA-T7 Offset (ET): 120 Option 1st Axle with Traction Aid Traction aid optimised with activation via push button in the truck (installation of button not included in scope of delivery) and by pressing the brake pedal three times Option 3rd Axle: Without Brake Pad Wear Indicator: Connected Tire Pressure Monitoring: Wabco TrailerPulse Air Suspension: ECAS with raise/lower valve Lowering of air suspension via Smartboard, as well as raise/lower valve Coupling Head Pneumatic: European palm coupling Wheels: Speedline Diamond Wheel Nut Caps: Chrome with STAS logo Landing Gear: Weweler steel gearbox landing legs, type Weweler, with compensating feet, single-sided operation, and 2 speed stages Underrun Protection Operation: Fixed underrun bar Lighting Manufacturer: Aspöck Lighting Type: EUROPOINT III – LED 2 pcs. LED reversing lights, rear, installed left and right on lamp bracket Work Lights (operated via switch): 2 pcs. LED reversing lights, front, left and right in direction of travel, mounted in the area of the landing gear Hydraulic Coupling: Rotary coupling Hydraulic Coupling – Position: Connection point at front wall (additionally with connection possibility at landing legs) Hydraulics positioning: pressure back, pressure left, return right (CON) Air connection in the toolbox Aluminum access ladder 3.80 m – right-hand side in direction of travel Broom and shovel holder, three holders each, mounted on chassis, left-hand side in direction of travel Moving Floor System: Brand Cargo Floor Air/electric console centrally mounted in direction of travel, with support bracket Lighting unit protection: one-piece splash guard Body Front wall angle (°): 90 Rear wall angle (°): 90 Rear wall type: Swing doors A-panel: Folding on the rear wall, mounted right in driving direction Cover plate between floor and front wall: Fixed aluminum plate and PVC strips Fifth Wheel Plate Type: Standard Front wall profile: 3 mm - 2 mm Side wall profile: 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Wear plates: Rectangular 1500 x 1000 x 4 mm Floor system operation: Radio remote control Cargofloor Control Type: CF 500 SL-C - E-CONTROL Floor profile type: 8 mm ribbed Moving floor closure plate: Stainless steel Itedpsxdqbkofx Afdjf With additional plastic guides below the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for moving floor system Residue-free discharge wall Rear wall: Aluminum Swing door version: split 1/2 to 1/2, with transverse door header Door wing opening: right door wing opens first (STAS manufacturer’s choice) Transverse door header: swivel version Door header material: Aluminum Rear door locking: 1x swivel bar per door half

Condition: good (used), machine/vehicle number: YE6S300CXE0001460, axle configuration: 3 axles, color: white, Year of construction: 2014, GVW: 5.560 kg Technical condition: good Visual appearance: good Rear tyre size: 385/65R22.5 Brakes: air Ijdpfeyunnqox Afdstf Vehicle's outer dimensions: 8,94x2,55x3,56 Production country: BE Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information = Additional options and accessories = - Front air suspension - Rear air suspension

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle Hardox steel tipper 86 m³ First registration 01/2023, from first owner Mileage 188,744 km Internal dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Continuous floor made of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically retractable underrun protection at rear Straight front wall, with internal access ladder Rear portal doors 50:50, pneumatically unlocked Reinforced roll-over tarpaulin HYVA tipping cylinder type Alpha, low pressure 2x pneumatic vibrators JOST crank landing gear, full load capacity SAF axles with large 430 mm disc brakes 1st axle is a lift axle WABCO Trailer EBS with RSS (Roll Stability Support) WABCO Smartboard Lift and lowering function Automatic tipper lowering 6x 385/55 R 22.5 tires ALCOA Dura-Bright polished alloy wheels Aluminum access ladder Shovel and broom holder Tool box on left Isdpfx Asy Dy E Uofdstf 4x LED reversing lights RENTING is the new BUYING – immediately available from us also on full-service lease

Condition: used, maximum load weight: 32,410 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 03/2027, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First registration: 02/2024, one owner Mileage: 152,200 km Dimensions (internal, LxWxH): 13,110 x 2,350/2,450 x 2,770 mm (conical design) Unladen weight: 9,640 kg Floor: one-piece 5 mm Hardox steel HB450 Front wall and side walls: 3 mm Hardox steel HB450 Pneumatically foldable underrun protection at rear Straight front wall, internal access ladder Rear portal doors 50:50, pneumatic release Reinforced roof tarpaulin HYVA tipping cylinder, type Alpha, low-pressure 2x pneumatic vibrators Itedpoy Dy Hrefx Afdsf JOST crank-operated landing legs, full load SAF axles with large disc brakes, 430 mm 1st axle is a lift axle WABCO Trailer EBS with anti-skid protection (RSS) WABCO Smartboard Lifting and lowering device Automatic tipping lowering Tyres: 6x 385/55 R 22.5 ALCOA Durabright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING – available immediately from us with full-service rental.

Condition: used, maximum load weight: 32,590 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 52 m³, total width: 2,550 mm, total height: 3,690 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Aluminum Tipper Semi-Trailer 52 cbm First Registration 04/2024 Mileage 152,817 km Internal Dimensions (LxWxH): 9,665 x 2,475 x 2,165 mm Pallet width Unladen weight 6,410 kg Iodoy Dy Hfepfx Afdjtf Floor made of continuous 8 mm aluminum with 110 Brinell Front wall 4 mm aluminum Side wall profiles 3 mm - 2 mm, with smooth finish inside and outside Twin-leaf combination doors with swing function, pneumatic remote unlocking 2 grain discharge chutes with 1x dust protection bag Reinforced roof tarpaulin HYVA tipping cylinder, Type Alpha, suitable for high and low pressure Full-load crank landing gear SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard lifting and lowering device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolkit box on right side 4x LED reversing lights RENTING is the new BUYING, instantly available from us also as a FULL-SERVICE RENTAL-----

Condition: used, maximum load weight: 30,780 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, loading space length: 7,500 mm, loading space width: 2,350 mm, loading space height: 1,650 mm, loading space volume: 29 m³, Year of construction: 2023, Equipment: ABS, Air, 2x lift, Jost fifth wheel, EBS, drop-down support legs, access ladder, aluminium rims, SmartBoard, ECAS, small tail lamp, PVC half-shell mudguards, vibrator, tyre pressure monitoring incl. inflation, pneumatically foldable underrun protection, overlapping rear wall, slider, Okulen, Cramaro tarpaulin cover Itodpfxjy Dy Ato Afdsf

Condition: new, axle configuration: 3 axles, loading space length: 12,355 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 608 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: Iedpfxsy Dmv Hs Afdjtf * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load (national) (t): 12 * Axle load (national) (t): 8 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-Value: 0800 * Overall width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Overall length (mm): 12355 * Brake version: disc brake * Offset (ET): 120 * Option 1st axle: with lift axle and starting aid * Activation of starting aid via button in truck (mounting of button not included in standard equipment) and by pressing the brake pedal three times * Option 3rd axle: with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping process, can be manually locked via Smartboard as well as switch mounted to chassis * Pneumatic coupling head: European palm coupling * Control console: EBS control on left-hand side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Working light position (operated by switch): 2x LED reverse lights at rear, left and right (on lamp bracket) * Working light position (operated by switch): 2x LED reverse lights at the front, left and right, near landing gears * LEDs in door end crossmember: 2 x 3-function LED * Operation underrun protection: manual * Mudflaps underrun protection: Black with STAS logo * Cylinder tipping angle normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Mudflap type: Clear Pass mudguard * Toolbox: 860x520x500 * Air connection: left side in direction of travel, on lamp bracket * Aluminium access ladder: 3 m * Two plastic chocks * Chassis-body catch device: Rubber polyps Body: * Front wall angle (°): 90 * Rear wall angle (°): 90 * Lower chord profile inside angle (°): 90 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads fitted below floor cross-members * Rear wall type: combination door * Rear wall: aluminium * Combination door type: 1/2 - 1/2 with pivoting door end crossmember * Door end crossmember: pivoting design * Slide position: 2 units, left + right * Additional rear wall locking: pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manual via control on side of instrument panel * Number and position of roof bows: 3 mid bows (evenly spaced) and 1 rear bow (at back) * Position and type of roof bow hinge: right

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type Isdpfx Afey Dmvmedjtf * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 Isdpey Dmvajfx Afdstf * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: new, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 906 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder Iodjy Dmu Nspfx Afdetf * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end