Stas conveyor 500 x 40 cm

STAS

Condition: used, axle configuration: 3 axles, first registration: 04/2011, loading space length: 9,000 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, total length: 11,500 mm, total width: 2,600 mm, total height: 3,700 mm, tire size: 425/65R22.5, tire condition: 60 %, color: red, Equipment: ABS,

Condition: used, maximum load weight: 33,110 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space volume: 46 m³, Equipment: ABS, Stas three-axle grain tipper, volume approximately 46 m³, portal doors with 2 grain slides, tarpaulin cover, platform, air suspension, lift axle, disc brakes, BPW axles, aluminum rims, Wabco SmartBoard, EBS, ABS. Knsdpfxj Abyzfe Ahaoc

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, General Information Year of manufacture: 2008 Axle Configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle 2: Aluminum rims; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Rear axle 3: Aluminum rims; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Knsdpfx Aszgmazehajc Weights Unladen weight: 4,890 kg Payload: 33,110 kg GVW: 38,000 kg Condition Damage: None

Condition: used, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22.5, color: other, General Information Year of manufacture: 2012 Axle Configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Tire tread depth left: 8 mm; Tire tread depth right: 5 mm Rear axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Rear axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Weights Unladen weight: 5,890 kg Payload: 32,110 kg GVW: 38,000 kg Condition Damage: None Knjdozxmniopfx Ahasc

Condition: used, axle configuration: 3 axles, first registration: 05/2013, loading space length: 8,400 mm, loading space width: 2,390 mm, loading space height: 1,550 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,310 mm, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Knjdpfswzkx Tjx Ahasc Empty weight: 5.590 kg Carrying capacity: 33.410 kg GVW: 39.000 kg Make of bodywork: STAS Tipper: Back

Condition: used, axle configuration: 3 axles, first registration: 09/2025, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 92 m³, Chassis: Superstructure manufactured using a self-supporting design with corresponding reinforcements in the lower belt for particularly high stability and strength, cross members 140mm high – reinforced design (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (semi-trailer construction max. total weight up to 39,000 kg) Axles and Suspension: Disc brake 22.5 Jost (DCA) axle units – off-road, 3x9t with DCA air suspension, ECAS lifting and lowering valve, Wabco Smartboard, electronic brake wear indicator BVA – can be read in the central control unit, 1st axle liftable with starting assist, 3rd axle liftable with Optiturn and Optiload without central control unit equipment, Wabco Trailerpulse – tire pressure monitoring system Tires and Wheels: 6 wheels with tires of size: 385/65 R22.5, tires approx. 60-70% on steel rims silver in 11.75x22.5 ET 120 King Pin: 2" king pin screwed into a 10mm steel plate Landing Gears: Mechanical landing gears with two speeds, 2x 20t support load with pivoting foot Braking System: According to EG standard, EBS-E system Wabco with RSS system (Roll-Stability-Support) and premium modulator, spring brake system acting on two axles with operation in front of the first axle on the left, aluminum air reservoir system Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with five-chamber lights type: Aspöck ECOLED 3, 24V system with 1x15-pole and 2x7-pole socket with side marker lights - LED flashing, 2x reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2x reversing lights in the lamp carrier, audio alarm when reversing Kedez S St Aepfx Ahasnc Superstructure/Body: Body inside fully welded, reinforced side walls, front wall load 17,250 dkN, side wall load 13,400 dkN, rear wall load 10,400 dkN, aluminum body, side walls 30mm thick aluminum side wall profiles (2-3mm) 600mm wide, completely welded with upper and lower belts reinforced, plank profiles inside fully welded, floor laid as a sliding floor system on 140mm cross members, floor load capacity approx. 9t/m?, cross members mounted closely together (approx. 350mm), aluminum front wall with 600mm plank profiles (2-3mm) in a straight design, special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum swing doors 30/50mm thick with 2 rotating rod locks in the welded aluminum rear frame, attached in Teflon and INOX bearings, doors secured in the open position with two fixed stainless steel door latches, hard wear plates on the side walls approx. 2,000x1,500x4 mm fully welded, moving residual emptying wall with Kevlar fabric approx. 1,800mm long, plus side Kevlar fabric seal, service door in the front wall on the left, opening inwards Hydraulic System "Cargo-Floor" Sliding Floor System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD slide bearings plus anti-lift slide bearings, floor type: CF 10mm ribbed, end plate aluminum, hydraulic cylinder with approx. 200mm working stroke, hydraulic connection between the support legs with a separate possibility for connecting the hydraulic line to the front wall, load compartments to be specified, line size NW 21, operating pressure 190-max 250bar, aluminum end pieces welded into the sliding floor, control console in front of the first axle on

Condition: used, axle configuration: 3 axles, first registration: 06/2022, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,825 mm, loading space volume: 93 m³, Chassis: Reinforced, continuous chassis design, new. Body: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength. Cross members, 140 mm high, reinforced design for high ground load. Additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, made of galvanized steel up to the support structure (semitrailer construction, max. 39,000 kg). Axles and Suspension: Disc brake 22.5". Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BWI) readable in the central control unit (CCU) (display), 1st axle with starting aid (new EC regulation, without CCU option). Tires and Wheels: 6 wheels with tires size 385/65 R 22.5, approximately 50-60% tread, on steel rims, silver, 11.75x22.5, offset 120. Kingpin: 2" kingpin bolted into a 10 mm thick plate. Landing Gear: Mechanical landing gear with two speeds, 2x 20 tons support load with pivoting foot. Braking System: According to EC standards, EBS E system Wabco with RSS (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Knedpfx Aez S St Nehaoc Electrical System: According to the guidelines of EC standards 91/633 and 97/28 with 2 five-chamber lights, Aspöck Europoint 3 type, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels on the rear, position lights front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-shaped protection. Body/Container: Body completely welded on the inside, reinforced side walls. Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn. Aluminum container, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper belt. Plank profiles completely welded on the inside. Floor as a sliding floor system laid on 140 mm ALU cross members. Floor load approximately 9 tons/m2. Cross members mounted relatively close together (approx. 350 mm). ALU front wall with 600 mm plank profile, 2-3 mm thick, in a straight design. Special ALU corner profiles in a beveled design. Smooth rear wall in a straight design with 2 ALU wing doors, 50/30 mm thick, with 2 swivel rod locks, mounted in a welded ALU rear frame with Teflon and stainless steel bearings. Doors secured in the open position with one chain each on the side. Moving discharge wall with Kevlar cover, approx. 1,800 mm long, plus side Kevlar seal. Hydraulic System: "Cargo - Floor" Sliding Floor System Sliding floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders, plus anti-lifting glide bearings, type CF, 10 mm floor design. Hydraulics with approx. 200 mm working stroke. Fixed stops on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed stops. Line size NW 21. Fixed stops with a size and design to be specified. Operating pressure 190-max. 240 bar. ALU end pieces welded into the sliding floor. Electrical operation at the rear left with remote control integrated in a lockable, waterproof box. Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 6 PVC splash guards above the wheels, 1 ALU wheel chock, side ALU impact protection in a folding design, 1 toolbox approx. 860x460x400 mm in p

Condition: used, empty load weight: 7,810 kg, maximum load weight: 28,190 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 05/2027, loading space length: 13,513 mm, loading space width: 2,550 mm, loading space height: 2,641 mm, total length: 25,500 mm, total width: 39,960 mm, total height: 140,000 mm, suspension: air, tire size: 385/65 R 22,5, Year of construction: 2025, front tire size: 385/65 R 22,5, rear tire size: 385/65 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, aluminum chassis, color grey, air suspension with lift function, raising and lowering, loading volume 90, lift axle on 1st and 3rd axle, portal doors, disc brakes, fixed side underrun protection, toolbox, 2x LED reversing lights, 4x LED reversing lights on the sides (2x on the support gear and 2x behind the axle assembly), 1x LED spotlight inside the cargo area, broom and shovel holder on the left side underrun protection (in direction of travel), Cargofloor control type CF 500 SL-C - E"-CONTROL, 10mm ribbed, with additional plastic guides beneath the floor profiles, double wing doors (1/2 - 1/2 with upper door crossbar), radio remote control, rear door impact protection - aluminum buffers across the full width of the rear wall, roof bows and tarp, maintenance flap front left, working platform with access ladder, roll-up tarpaulin (PVC tarpaulin, Panama quality, 900g/m²), cargo securing certificate DIN EN 12642 Code XL, production 5/2025, like new condition!!! Kedpjz S N Tgjfx Ahaonc

Condition: new, axle configuration: 3 axles, loading space volume: 55 m³, Equipment: ABS, ferroSTAR 55 cbm Chassis material: Steel Chassis type: Z-chassis King pin load (national) (t): 12 Axle load (national) (t): 8 Axle track (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Loading width (mm): 2325 Internal height at the front (mm) (IHF): 2,285 Internal height at the rear (mm) (IHB): 2,285 Loading length (mm): 10149 KC-Value: 0650 Knjdpfezdw Ttjx Ahaec Overall width (mm): 2550 Volume (m³): 55.00 Wheelbase (mm) (WB): 6,600 Overall length (mm): 11,501 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: First axle with lift axle and starting assist Activation of starting assist via button in the truck (mounting of the button is not included in the scope of supply) and by pressing the brake pedal three times Option 3: Third axle with lift axle Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, and switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side, in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side, in the direction of travel Support legs: JOST MODUL type Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo Rear lights: 2 LED reversing lights, mounted at the rear, on the left and right, on the lamp carrier Position: Work lights (operated via switch) 2 LED reversing lights at the front, on the left and right, in the area of the support legs Underbody protection: Manual operation Splash guards: Underbody protection, black with STAS logo Tilting cylinder: Hyva (STAS manufacturer's choice) Tilting cylinder type: Cylinder with small casing Cylinder tilting angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Tilting cylinder stroke: 7130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Rotary coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Fenders: Domar STAS with white stripe Splash guards: Fender, Clear Pass Toolbox: On the left side, in front of the axles Aluminum extension ladder with a length of 2.8 m, mounted on the right side Position: Broom and shovel holder with 3 holders each, mounted on the chassis on the left side Load pressure gauge: Ø 100 mm - mounted at the front of the chassis Two plastic wheel chocks Locking device: Chassis - superstructure, rubber bumpers Front wall: Made of 3 mm HB450 Side wall: Made of 4/3 mm HB450 Floor: Made of 5 mm HB450 Position: Rubber pads attached under the floor crossbeams Rear wall type: Swing doors Rear wall: Made of 3 mm HB450 Number of hinges: Rear wall: 3 pairs of door hinges Design: Swing door, divided 1/2 to 1/2, with 1 piece of latch Opening of the door leaves: Right first opening Fastening of the open door leaves: Via chain Sealing: Rear wall with rubber sealing in the lower area, extending 1,000 mm to the side Additional locking: Rear wall, pneumatic

Condition: new, axle configuration: 3 axles, loading space volume: 60 m³, Year of construction: 2026, Equipment: ABS, farmSTAR 60.4 cbm Silver gray Chassis material: Aluminum Chassis type: Sliding floor Axle spacing (mm): 1310-1310 Kingpin height (mm): 1150 Chassis width (mm): 1200 Loading width (mm): 2475 Internal height front (mm) (IHF): 2,300 Internal height rear (mm) (IHB): 2,300 Loading length (mm): 10613 Height of chassis neck (mm): 240 Overall width (mm): 2550 Volume (m³): 60.41 Overall length (mm): 11,420 Disc brake Number of axles with spring brakes: 2 Offset (ET): 120 Option 1: 1st axle with lift axle and starting aid Activation of the starting aid via button in the truck (button mounting is not included in the scope of supply) and by pressing the brake pedal three times Option 3: 3rd axle with lift axle and Optiturn Activation of the additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Return-to-ride (RTR): 15 km/h ECAS air suspension with raising and lowering valve Lowering of the air suspension via Smartboard, as well as raising and lowering valve Coupling head: Pneumatic, European Palm coupling Control console: EBS operation, on the left-hand side in the direction of travel, behind the axles Standard Smartboard Air and electrical console in the center with gantry Outriggers: Aluminum telescopic supports Tire dimension: 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome with STAS logo Manufacturer of lighting: Aspöck Type of lighting: ECOLED III - with STAS logo Rear lights: 2 LED rear lights, mounted at the rear in the direction of travel, left and right on the lamp carrier Position of work lights (operated via switch): 2 LED rear lights at the rear in the direction of travel, left and right, mounted behind the axles Position of work lights (operated via switch): 2 LED rear lights at the front in the direction of travel, left and right, mounted in the area of the outriggers Position of work lights (operated via switch): 1 piece inside on the front wall in the direction of travel, on the left Protection of the lighting unit: One-piece mudguard LEDs in the door closure cross member: 2 x 3-function LED Underbody protection Operation of underbody protection: Fixed underbody protection Splash guards: Black with STAS logo Hydraulics Position of control console: Sliding floor, left, in front of the axles Hydraulic coupling: SKL Ksdpfx Ahez Shv Ijaenc Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling return: SKL Hydraulic coupling return - Size: 1 Hydraulic coupling return - Gender: Female Hydraulic coupling - Hose: 3,000 mm Hydraulic coupling - Position: Connection possibility on the front wall (also with connection possibility on the outriggers) Hydraulic coupling - Design: Standard design Hydraulic positioning: Pressure return, pressure left, return right (CON) Suspension of the hydraulic hose with springs: Yes Toolbox Air connection in the toolbox Aluminum extension ladder: 2.5 m, extendable - on the right in the direction of travel Profile of the front wall: 3 mm - 2 mm Service door: On the left in the direction of travel - opens outwards (safety aspect) Profile of the side wall: 3 mm - 2 mm Sliding floor system: Manufacturer: Cargo Floor Operation of the floor system: Remote control Sliding floor system: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Type of floor profile: 11 mm smooth, overlapping End plate: Sliding floor, Aluminum Mounting of the end caps: Welded Oil t