Stratasys Dimension 3D printer

Stratasys 3D-Drucker

Condition: used, Stratasys Objet   Model: Objet260 Connex 2   Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825   The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the production of prototypes made of three materials, as well as simulating overmolding or equipping build plates with selected models.   Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces and thin walls.   Model materials:   Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525)   Digital Materials:   Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance   Applications: Visual prototypes Functional prototypes Tools and fixtures Architectural models Medical models Injection molding molds Guedpfx Aozh Dqyjqgeh Concept models   Technical specifications:   Build volume: 255 × 252 × 200 mm   Layer thickness: Horizontal layers of only 16 µm   Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi   Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the complete model size (only for rigid materials, depending on geometry, design parameters and model orientation)   Size and weight: 870 × 735 × 1200 mm; 410 kg   AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Objet Stratasys Objet30 Prime V3 + Cleaning Glovebox Technical specifications: Machine: 82.5 × 62 × 59 cm; 106 kg Build platform: 294 × 192 × 148.5 mm Layer thickness: 28 µm; 16 µm for VeroClear material Accuracy: 0.1 mm, may vary depending on model geometry, size, orientation, material, and post-processing method Model materials: Transparent, rigid (VeroClear) Rigid, opaque, white (VeroWhitePlus) Rigid, opaque, blue (VeroBlue) Rigid, opaque, black (VeroBlack) Rigid, opaque, gray (VeroGray) Polypropylene-like (DurusWhite and Rigur) Heat-resistant (RGD525) Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Manufacturer: Objet/Stratasys Type: Objet30 Pro Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data are subject to change!) Gedpszgcqcefx Aqgsuh We will gladly answer any further questions you may have over the phone. Written orders can be placed by email or fax.

Condition: used, Stratasys Type: Dimensio elite Stratasys 3D printer Dimensio elite The Dimension Elite 3D printer is part of Stratasys’ Design Series. The Dimension Elite printer is ideal for printing 3D prototypes and for modeling functional components, such as medical devices, mobile electronic devices, or precision instruments. With a simple click on “Print,” the CAD file is prepared and the printing process is started. After easily removing the soluble support material, a precise and detailed component is revealed. Guodpezdnprefx Aqgeh Manufacturer: Stratasys Type: Professional operation Material(s): ABS Technology: Fused Deposition Modeling Installation: Plug&Play Size: 686x914x1041 Weight (kg): 136 Nozzle opening (mm): - Layer thickness (µm): 178 Speed (mm/s): - Precision (µm): - Filament thickness (mm): - Maximum build volume (mm): 203x203x305 File format: .stl Software: CatalystEX Software Connections: Ethernet Operating system: Windows XP, Windows 7 Required power: 100 to 120 VAC, 60 Hz, at least 15 A on a dedicated circuit or 220 to 240 VAC, 50/60 Hz, at least 7 A on a dedicated circuit Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Stratasys Type: Stratasys 3D printer, PolyJet printer J750 Objet Stratasys 3D printer With the J750 3D printers from Stratasys, you can optimize and streamline the process of manufacturing models from various materials with a single build platform in the same print job. During the design phase, the J750 3D printer (in conjunction with CAD software) allows you to assign colors to components of a model. You can then save the model as a VRML file and have it printed with the desired colors. The Stratasys J750 3D printer has a build volume of 490 mm × 390 mm × 200 mm (19.3 x 15.35 x 7.8 in). AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, 1-phase Or 220–240 VAC, 50–60 Hz, 7 A, 1-phase LAN requirements Required before printer installation. Confirmation at [printer IP address]:80. Static IP address. Materials Agilus30 family Digital ABS Plus Tango Transparent Vero family Veroflex Gjdpfozd Tf Ejx Aqgjuh VeroUltra Opaque SUP705, SUP706 support material Applications Rapid prototyping Concept models Medical models Tools and fixtures Colored textures Total printing time on the machine is approximately 1483 hours. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, Objet Stratasys   Type: Objet Connex500/h5>   Objet Stratasys 3D Printer   The Objet Connex 500 is Objet’s groundbreaking multi-material 3D printer. With a large build size of 500 x 400 x 200 mm, designers and engineers can quickly create prototypes, allowing them to simulate the intended end product more accurately than with any other technology.   What makes the Objet Connex unique?   With Objet’s patented simultaneous multi-material jetting technology, the Objet Connex 500 can print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products.   Freedom to choose your own materials   The Objet Connex500 offers an unparalleled selection of over 60 materials, including up to 51 Digital Materials™. With it, users can simulate a variety of mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS-grade engineering plastics.   Excellent Productivity   The Objet Connex 500 offers: • Multi-material models - no need to design, print, and glue together separate model elements • Different parts. Different materials. Same tray - saves time and serves multiple requirements simultaneously • Excellent 16-micron print accuracy with high resolution • 600 DPI X & Y resolution • Thin walls up to 0.6 mm • Large-format tray with dimensions of 500 x 400 x 200 mm - enables printing of large parts in a single build or many small parts on a single tray • High throughput - up to 20 mm per hour and layer • Reliability and robustness - at least 72 hours of continuous capacity • High speed - simultaneous printing of multiple items from different materials; models cure while printing; models can be processed immediately after printing • Easily removable support material for complex geometries • Office comfort - quiet system with fully sealed REACH-compliant cartridges that are easy to load and unload   Year of manufacture 2010   According to the last operator, it is functional. No functional test has been carried out by our company.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, information provided are subject to change!) Godpfx Aozdnplsqgsuh   We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2017, Stratasys 3D Printer PolyJet J750 With the Stratasys J750 3D printer, you can optimize and streamline the process of manufacturing models using various materials on a single build platform within the same print job. During the design phase, you can assign colors to different components of a model. The model can then be saved as a VRML file and printed with the desired colors. Ongoing maintenance package until June 2026, including spare parts, is included. The Stratasys J750 3D printer offers a build volume of 490 mm x 390 mm x 200 mm (19.3 x 15.35 x 7.8 in). AC Power Connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 220–240 VAC, 50–60 Hz, 7 A, single-phase Gujdpfx Asyly Aueqgjh Technical Details Overall length: 1,400 mm Overall height: 1,100 mm Overall width: 1,260 mm Input current type: Alternating current (AC) Total weight: 430 kg Input voltage: 230 V Input current: 13 A Input frequency: 50–60 Hz Ambient temperature (min): 18 °C Ambient temperature (max): 25 °C Applications - Rapid prototyping - Concept models - Medical models - Tooling and fixtures - Coloured textures