Thermo xl3T 980 goldd+ spectrometer

Thermo Fisher Scientific xl3T 980 goldd+

NITON XL3t 980 GOLDD+ – a portable X-ray analyzer featuring a next-generation SDD detector with GOLDD technology.

GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional Si-PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software.

It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh.
Analysis of light elements such as Mg, Al, Si, and P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without using helium, the determination of light elements is possible for concentrations above 0.x%.
A large library of spectral libraries of alloys enables the identification of stainless steels, tool steels, chrome-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, zinc alloys, zirconium alloys, and aluminum alloys. The analyzer provides very fast measurements. The analysis time for typical alloys is less than 3 seconds.

An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys, such as:

casting alloys depending on the silicon (Si) or magnesium (Mg) content,
Godpfx Aozlcciohzjiw
aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes,
aluminum (Al) content in titanium alloys,
magnesium alloys (Mg),
zinc alloys with aluminum (Al).

The analyzer enables the analysis of:

all alloys based on iron (0.00x% – 100%) and non-ferrous metals (0.00x% – 100%) as well as rare metals Hf, Ta, Re (0.00x – 100%)
precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x% -100%).

The NITON XL3t 980 GOLDD+ analyzer operates on BASIC PARAMETERS, meaning it calculates the percentage content of elements based on a mathematical equation.
The analyzer also allows for the development of its own analytical programs:

an identification program that allows you to assign a name, symbol, number, etc. to a known sample, and subsequent samples will be identified by this name
B23Zpkshvo
a program for quantitative chemical analysis (SuperChem Teach Mode) – based on your own standards, you can create your own calibration curves for quantitative analysis.

The analyzer has a large, user-friendly, touch screen. The screen is color and tiltable, which makes it easier to read the results while working in the field, integrated scanner, backlit alphanumeric identification codes for samples.
The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth.
It is supplied with two, interchangeable batteries. One battery allows for continuous operation for 8-10 hours without the need for charging.
It has two libraries: 900 and 800.

The listing was translated automatically. Translation errors are possible.