Center lathe

tour WALDRICH SIEGEN 44 TP 95

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Bdodjzka H Ajpfx Alzji

Condition: new, For sale, a pipe straightener from the German manufacturer SMS MEER, the machine is brand new, it was dismantled from a plant that collapsed during the delivery and assembly of the machine. The machine has two Siemens 200 kW drive motors each. Straightening rollers have a length of 460mm, diameter on the sides 400mm, diameter in the middle 300mm. The weight of the machine itself is 44 tons, the total weight is 55 tons. Bdsdpfem H Unhox Alzei I can send a lot of photos before dismentling.

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, I am selling this machine, it is connected and can be tested. A video of the machine can be sent via WhatsApp. Diameter over the bed: 1250 mm Bdedpjxwqk Esfx Alzsi Diameter over the carriage: 900 mm Turning length: 6000 mm Workpiece weight between centers: 14,000 kg

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, overall weight: 120,000 kg, total height: 5,600 mm, pressing force: 1,250 t, air pressure: 6 bar, distance between side stands: 1,200 mm, distance between stands: 1,400 mm, stroke length: 500 mm, table length: 1,850 mm, table width: 1,600 mm, Straight-sided eccentric press ERFURT type PKZe 1250 Superb working condition, after full, professional overhaul. After - newer used. Specification: Capacity: 1250 ton force Slide stroke: 500 mm Slide adjustment: 215 mm Maximum shut height between bolster plate and slide (stroke down, adjustment up): 860 mm Bed area (width x depth): 1600x1850 Slide area (width x depth): 1300x1400 mm Opening in the bed (width x depth): 1100x1100 mm Main motor rating: 90 kW at 1478 RPM Ram adjusting motor rate: 7.5 kW at 1450 RPM Number of single strokes: 8 min-1 Cushion capacity: 200 ton force Cushion stroke: 200 mm Bodpfjubyrxjx Alzsdi Height above floor: 7900 mm Press weight: 130 000 kg.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 700 mm, spindle speed (max.): 2,000 rpm, table length: 1,100 mm, table width: 842 mm, X axis: mm 1.000 Y axis: mm 700 Spindle travel: mm 300 Table dimensions: mm 1.100 x 842 Spindle speed: rpm 40 – 2.000 Spindle cone: MT 4 Max power: kW 10 Max loading on table: ton 1 Machine weight: ton 15 EQUIPPED WITH A LOT OF ACCESSORIES Bdsdpfxezizgbj Alzoi

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Bdsdpfjtwllfjx Alzoi Metric US Standard Table length 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1997, Spindle diameter: 110 mm Travel: Bdsdpfx Aozy E Svslzji X: 1985 mm Y: 1620 mm Z: 1260 mm W: 710 mm Table surface: 1400 x 1600 mm Spindle taper: ISO 50 Control system: HEIDENHAIN TNC 426 Maximum table load: 6300 kg Feed rate: 5 m/min Working feed rate: 5 to 2500 mm/min Spindle speed: 6 to 1250 rpm Motor power: 33 kW Total power: 90 kW Table rotation: 360° Weight: 25400 kg

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, For sale: this lathe. Swing diameter over bed: 1,000 mm. Turning length: 4,000 mm. Sinumerik 840D control. Bjdpfx Aljxzr Rbozodi

Condition: excellent (used), Year of construction: 2003, operating hours: 18,847 h, functionality: fully functional, machine/vehicle number: nº Serie 1151, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Trevisan DS200 is a Machining Center featuring an integrated turning device (U-axis/facing head), enabling turning with the workpiece stationary and the tool rotating (cylindrical, conical, spherical, threading, facing) and, within the same setup, milling, drilling, and reaming with the main spindle. It is equipped with two independent spindles (milling head + U-axis facing head) and automatic tool change, thus functioning as a combined "lathe + machining center" in a single unit, reducing cycle times and errors due to re-clamping. Typical Architecture of the DS200 Series • Structure: bed and columns made of high-rigidity cast iron. • Contouring head (U-axis): various diameters with a radial travel of 70 mm, multi-tool tool holder, and constant surface speed for high-quality turning with the workpiece stationary. • Table/palletization: 1 pallet with a table size of 1200x600 mm. • Capacities: up to Ø350 mm. Focus on the Trevisan DS200/70 The DS200/70 belongs to the "Small/Compact" family, designed for medium-sized parts requiring precision turning and milling/drilling operations in a single setup. According to Trevisan nomenclature, “200/70” indicates a facing head diameter of 200 mm with U-axis travel of 70 mm. Indicative Configuration and Capabilities • Type: Trevisan DS200 turning-milling center Bdedpfx Alexrb Ukjzei • Facing/contouring head (U-axis): Ø ≈ 200 mm, U-axis travel ≈ 70 mm, suitable for cylindrical, conical, spherical, threading, facing operations with the workpiece fixed. • Basic travels (DS200/70 class): X ≈ 520 mm. • Single-setup processes: turning (fixed workpiece) + milling/boring with main spindle → reduced cycle time and improved coaxiality between turned and machined surfaces. Typical Use Cases • Valve bodies, covers, flanges, and pump components where turned internal/external profiles (spherical, conical) and multiple precision drilling/milling operations are required.

Condition: excellent (used), Year of construction: 2001, AN VERY RARE OPORTUNETEY TO BUY AN EXCELLENT MACHINE WITH HUGE AMOUT OF TOOLINGS, DRAWERS, CLAMPING EQUIPMENT... OWER 400 EXPENSIVE TOOLINGS CNC BORING MILL WOTAN RAPID 1 RETRIFITTED 2001 WITH HUGE AMOUNT OF OVER 450 TOOLING Bdjdpfx Alsvkkf Hezsi VERY LOW HOURS WORKING TIME DATA: CONTROL ON: 8001 H MACHINE POWER ON: 13692H PROGRAM RUN: 4650 H SPINDLE S1 TIME: 4690 H AXIS TIME: 4568H HYDRAULIC ON TIME: 12702 H WE OFFER AN STUNNING EXCELLENT CONDITION WOTAN CNC RAPID 1 WITH HUGE AMOUNT OF TOOLINGS, FOR A SPECIAL STAINLESS WORK. MACHINE HAVE HEIDENHAIN 530 CONTROLS TECHNICAL DETAILS: SPINDLE SPEED : 6,3-1600 U/Min SPINDLE MOVE : Y AXIS : 1250 mm DRILLING SPINDLE MOVE: Z AXIS: 600 mm W : 1000 mm X : 2000 mm B: 360.000 DEGREE SPINDLE DIAMETER: 105mm TOOL HOLDER: ISO 50 WITHOUT TOOL CHANGER CLAMPING: HIDRAULIC MAX TABLE LOAD: 6000 KG TABLE: 1120 X 1400 NUT -BILD 7 ; 22H7 INDEXING 4 X 90 DEGREE TOTAL WEIGHT: 16000 KG DIMENSION OF MACHINE: LENGHT 4800 X BREIT 4665 X HEIGHT 4200