Treffler TGA 430

Treffler TGA 430

Treffler Cultivator TGA 430
Demonstration Unit

Frame:
-Center section 3 m
-Side sections 2 x 0.65 m
-Sturdy frame made of square tube 100x100 mm
-3 1/2-beam structure (one tine is mounted between the lower link arms to prevent lateral pull)
-Frame height 70 cm
-Tine carrier spacing 70 cm
-3-point hitch: Lower link arms Cat 2/3, upper link arm Cat 3

Folding:
-Hydraulically foldable 180° via scissor folding; the side sections lie on the center section, therefore there are no tines protruding outwards during road transport
-Folding of the side sections with 2 double-acting cylinders; the side sections are hydraulically locked in the working position

Ndedpfx Aj Aflthokaoc
Tines:
-19 patented tines, spring-mounted via a leaf spring system
-Laterally stable tines; only deflection backwards and upwards is possible
-The pivot point, which is approximately 1 m high and located 25 cm in front of the share tip, enables fine depth adjustment based on draft resistance without significantly changing the working position of the goosefoot shares
-The shear bolt engages in case of overload (from 1100 kg)
-Row spacing 22 cm, overlap 8 cm

Leveling Tines:
-Spring-mounted leveling tines
-The two outer leveling tines can be manually adjusted

Tire Size, Support Wheels:
-The front depth guidance is provided by tandem support wheels 195/55R10C
-They halve the influence of ground irregularities, such as combine harvester tracks
-Adjustable in height via crank, with a stainless steel depth scale
-The support wheels are mounted on the side sections

MAS226400
Price applies to the current condition. Offer subject to change. Errors, changes and prior sale reserved. All information without guarantee.

The listing was translated automatically. Translation errors are possible.