Laser welding system 2x 6kw with PFO and much more.

TRUMPF

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Pjdezu Avzopfx Ab Ajra Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Year of construction: 2007, condition: good (used), TRUMPF TruFlow 3200 Trulaser 3030 (2007) Pjdpezw D A Ijfx Ab Ajra Type of Current - 50 Hz Voltage - 400 V Rated power - 73 kVA Control voltage - DC 24 V Year of manufacture - 2007-08-15

Condition: excellent (used), Year of construction: 2008, Press force: 130 t Bending length: 3,000 mm Frame width: 2,690 mm Overhang: 420 mm Stroke: 215 mm Stroke rate: 10 mm/s Podpfxjzw Aite Ab Aora Machine weight (approx.): 11,000 kg Machine height: 2,700 mm Equipment: - 2 pcs. material support arms - Foot switch - CNC control system Trumpf TASC 5000 - Wila tool holder - Laser safety system - Side protection doors - Crowning - Die shifting - Controlled axes: y1, y2, x, R - 2 pcs. manual backstops

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Type: TruLaser 5030 fiber (L41) Laser power: 5000 watts Year of manufacture: 2012 Control system: Siemens Sinumerik 840 D Working area: 3000 x 1500 x 115 mm Operating hours: 66,934 h / 43,313 h Max. sheet thickness/steel: 25 mm Max. sheet thickness/stainless steel: 20 mm Max. sheet thickness/aluminum: 20 mm Max. speeds: 235 m/min Accuracy: 0.10 mm Length: 8300 mm Psdpozmf R Ssfx Ab Ajra Width: 4800 mm Height: 2400 mm Weight: 12,000 kg Operating hours: approx. 67,000 hours

Condition: used, Year of construction: 2011, Fully functional Pedpfx Abjzd Tlre Aora

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Available starting September/October. Operating hours: Laser: 35,000 hours. Pjdpfx Ajzn N Hgeb Aora

Condition: excellent (used), Year of construction: 1998, Hours: approx. 45,600 Pedpszniq Eofx Ab Ajra 6 axles Location available upon request.

Condition: used, Year of construction: 2011, Technical details: x-axis: 3000 mm y-axis: 1500 mm z-axis: 115 mm laser capacity in Watt: 3000 Psdpfjzwvcgex Ab Aera

Condition: new, Year of construction: 2025, machine/vehicle number: B2202I0007, TruBend 3130 (3.2 m) (B38) – economical, precise, and future-proof all-around bending machine with 1300 kN pressing force, 3230 mm bending length, 615 mm installation height, and 445 mm stroke. Equipped with a C-frame, press beam with spherical bearing and press beam inclination, On-Demand Drive with 4-cylinder technology, length measuring system (Y-axis) with dynamic springback compensation, back gauge finger 1000 mm (2 pieces), hydraulic TRUMPF lower tool clamping system, control unit with foot pedal, hydraulic oil filling, tank heating, and E-Learning package Technology TruBend. With CNC-controlled wedge compensation and Touchpoint TruBend machine control including user management system, TRUMPF bending technology data, and control panel support arm on the left, which can be swiveled and tilted. Data transfer via USB, RJ-45, network capability, and remote support interface. Safety features include CE marking/EC Machinery Directive, sliding door at the rear, and side swing doors on the right/left. Extended standard equipment: BendGuard with block laser, 4-axis back gauge (X, R, Z1, and Z2 axes), manual TRUMPF upper tool clamping system, workshop programming TecZone Bend (trial), installation, commissioning, and training, support console 70, control cabinet air conditioning up to 35 °C, Smart View MT ready, and data usage agreement. Prjdpfxezwnaqj Ab Asa

Condition: good (used), Year of construction: 2011, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Distance between uprights: 932 mm Overhang: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-axis working speed: 10/25 mm/sec Y-axis rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Space requirement approx.: 1805 x 1330 x 2380 mm TruBend 7036 Cell Edition Standard equipment: TruBend 7036 Cell Edition: - Electromechanical direct drive (torque motor) - Rear stop system with 6 axes and stop sensors - Positionable Wila tool clamping system - Control cabinet air conditioning BendMaster: - Stable base and manipulator - Load capacity 15 kg, max. sheet weight 3 kg - Floor-mounted track, welded construction with stable guide rail Psdpfszwla Ujx Ab Aera - Travel range 3215 mm - Gripper coupling on the BendMaster - Electric drives - Tongs with jaws LoadMaster Bend: - Handling system - Multi-suction device - Double sheet detection and singulation - Transfer system - System pallet Safety: - Protective enclosure with pivoting sliding doors Control: - PC control with 19" touchscreen - Mobile operating terminal - Network connection - Remote service via the Internet