CNC press brake

Trumpf Truma Bend V170

Condition: good (used), functionality: fully functional, Year of construction: 1999, Hydraulic Press Brake Make: TRUMPF Model: TrumaBend V170 Year: 1999 Technical Data Manufacturer: TRUMPF Iiodpjx E Tpiofx Ac Hok Model: TrumaBend V170 Year of manufacture: 1999 Operating hours: 45,074 h (read-off) Press force: 170 t Usable length: 4000 mm Stroke: 215 mm Dimensions: L 4.6 x W 2.70 (without bending aids 2.20 m) x H 2.70 m (transport height 2.5 m) Weight: approx. 16.5 t Equipment • Delem DA 2D graphic CNC controller • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Pneumatic die shifting • Hydraulic tool clamping top and bottom (Wila/Trumpf system) • CNC-controlled crowning • 2 movable bending aids • Prepared for ACB angle measurement • Upper tool, OW210/S 28°/R1, H 140mm, L = 4000mm, segmented • Lower tool, EV002W8 30°/R1, H 100mm, L = 4000mm, segmented All details without guarantee. A demonstration can be arranged at any time in our showroom.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: 02/510/004, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: Visitouch 19" 2D, bending force (max.): 225 t, working width: 4,100 mm, stroke length: 265 mm, number of axes: 4, table height: 800 mm, travel distance X-axis: 500 mm, back gauge adjustment: CNC-controlled, back gauge speed R-axis: 100 mm/s, overall weight: 22,000 kg, total length: 2,670 mm, total width: 4,100 mm, total height: 2,800 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 63 A, input frequency: 60 Hz, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, foot remote control, Pressbrake fully updated with a new numerical control 2D from Cybelec Switzerland Iodpfxjw I A Nco Ac Hsik

Year of construction: 1997, operating hours: 47,122 h, condition: ready for operation (used), Control Unit Model DA-65 Brand DELEM Additional Equipment Iijdpfx Aex D Ec Aoc Hsk Hydraulic clamping system This 6-axis TRUMPF Trumabend V170 press brake was manufactured in 1997. It features a bending force of 1700 kN and a maximum bending length of 4060 mm. The distance between uprights is 3680 mm, and it includes a hydraulic clamping system. Consider the opportunity to buy this TRUMPF Trumabend V170 press brake. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable Iiedpfx Acexcp Rbj Hsk - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: good (used), functionality: fully functional, operating hours: 12,921 h, Used AMADA press brake Model: HFP220-4S Iodoxwtvdopfx Ac Hsik Capacity: 4000 x 220T Number of axes: 8 axes CNC: AMNC, retrofitted by AMADA in 2022 Fast working speed: 100 mm/sec Ram stroke: 200 mm Electrical power: 67 amps, 38.5 kW motor Operating hours: 12,921h Machine tested and inspected by AMADA – report with photo Video on request Machine loaded onto truck

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device Isdpfx Aeu T Nknoc Hsik - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: ready for operation (used), Year of construction: 1997, Press force: 1700kN, bending length: 4000mm, stroke: 215mm, installation height: 365mm, passage width: 3680mm, throat depth: 410mm, feed speed: 200mm/s, bending speed: 1-10mm/s, retraction rate: 135mm/s, working height: 1050mm, control: Delem. Including spare parts and accessories. Documentation available. Isdpstqfqijfx Ac Heik

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, controller manufacturer: Cybelec, controller model: Cybtouch 12, bending force (max.): 300 t, working width: 6,000 mm, number of axes: 4, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Used 6metre x 300ton Adira Cnc Press Brake - Hydraulic Pressbrake 300 Ton 6000mm bending Length Back gauge: X and Z Axis Upgraded touch screen control Cyblec CybTouch 12 Control System Year of Manufacture - 2005 Ijdpfxowu Ua Uj Ac Hoik Good service history including rebuilt ram cylinders, rebuilt crowning and upgraded control system Euro tool clamping

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, General Data Measurements width 2210 mm Iodpfxox D Ilyo Ac Hjik Measurements depth 5000 mm Measurements height 3100 mm Machine weight 18000 kg Control Unit Brand TRUMPF Main Drive Pressing force 1700 kN Bending length 4080 mm Stroke 365 mm Number of axis 8 This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: CNC control, FOR SALE AMADA PRESS BRAKE HFBO 4 METRES 125 TONS WITH TOOLING PRICE: €16,000 loaded Iisdpjxvqznofx Ac Hsk