Four-jaw chuck

unbekannt

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The following three-part packaging line is offered on behalf of the owner, consisting of: + One semi-automatic L-sealer Bwjdpfx Ajxq Hcqjhmeu Sealing frame: 900 x 700 mm Product conveyor belt Film separator sheet Film roll holder for PO and PE films Machine is mobile 230 V, 3 m cable Year of manufacture: 2013, manufacturer unknown + One shrink tunnel Pass-through height: 250 mm Pass-through width: 500 mm Tunnel length (hood): 1,300 mm Rod spacing: 25 mm Three-phase current, 16 A and + One product conveyor belt 1,000 x 400 mm Adjustable side guides Harting connector The machine comes from a demonstration room, has correspondingly few operating hours, and is therefore in very good overall condition. The machine location is Salzgitter. The total price of 4,275 euros is ex works, unpacked, plus VAT. The individual components of the line can also be purchased separately. The individual prices – also ex works, unpacked, plus VAT – are as follows: L-sealer: 1,485 euros Shrink tunnel: 2,250 euros Product conveyor belt: 540 euros

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe -Diameter: 560 mm -Wall thickness: 16 mm -Length: 2880 mm -Number: 3x steel pipes available -Price: per piece -Weight: 214 kg/m² Bwodpfxszfafhs Ahmju

Condition: used, Machine: Unbekannt – Runder Edelstahltisch Bwjdpfx Asz Iazxjhmju

Condition: good (used), Roller conveyor, conveyor belt, roller track, pallet roller conveyor Bwodez Hw Sfepfx Ahmju -Roller conveyor: Colli roller track, length 3 m -Rollers: 2x Ø 48 x 15 mm -Roller spacing: 100 mm, see photos -Quantity: 225 x roller rails available -Price: per piece -Dimensions: 3000/125/H80 mm -Weight: 14.2 kg/pc.

Condition: good (used), Tool trolleys, workshop trolleys, mobile workshop trolleys, drawer cabinets, welding machine trolleys, machine trolleys -Width: 410 mm -Depth: 800 mm -Height: 1010 mm Bwodpjfnqhnefx Ahmou -Weight: 49 kg

Condition: used, functionality: fully functional, Manufacturer: unknown Year of manufacture: unknown Overall dimensions (L x W x H) in mm: 4,500 x 1,150 x 700 Width including drive: 1,050 Bwjdpszrr U Iefx Ahmju Conveyor length in mm (retracted): 4,500 Conveyor length in mm (extended): 12,500 Conveyor width in mm: 700 Conveyor height in mm: 640 Load capacity between 2 supports in kg: 20 Support roller axle type: Steel Support roller diameter in mm: 40 Support rollers per axle: 1 Support roller material: Steel Roller pitch in mm (retracted): 50 Roller pitch in mm (extended): 115 Drive: 10 x motor stations Motor manufacturer: SEW Motor specifications: 0.12 kW (total 1.2 kW), 230 V Conveyor speed in m/s: 0.7 Net weight: 360 Special features: Emergency stop, Schuko plug, Steinmetz circuit Condition: used / fully functional Functional test: OK

Condition: good (used), Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Plumb block bearing: bearing block, inner Ø 50 mm -Holes: 160 mm spacing x Ø18 mm -Quantity: 3 pillow block housings available - Price: per piece -Dimensions: 210/50/H170 mm Bwodpfx Ahjiq Tiaomsu -Weight: 3.3 kg/piece

Condition: new, pressure 10 t stroke 380 mm table-size 800 x 700 mm total power requirement 4,0 kW 90 mm weight 2,5 t dimensions 2,2 x 1,4 x 1,6 mm Bwedpfxez E Sv Ae Ahmeu

Condition: used, Technical details: floor-plate length: 4900 mm plate width: 1460 mm plate height: 300 mm Bwedsval Hqjpfx Ahmsu Plate thickness: 300 mm weight of the machine ca.: 5,3 / pro Platte t transport dimensions LxWxH: ca. 4,9 x 1,5 x 0,3 / pro Platte m There are two plate fields for sale. Material cast steel T-slots according to DIN 650: a=58; h=108; b=110; c=50 mm Center stand 295 mm 6x through holes Ø 40 mm 2 groove areas are broken out on the face of one panel. *

Condition: used, Technical details: weight: Preis wird nach kg berechnet kg Bodeu Nvkvjpfx Ahmswu Various crane runways Pos. 1: Columns for crane runway 6x double T-beams L: 4.66 metres x W: 22 cm x H: 54.5 cm 1x double T-beam L: 4,71 meter x W: 21,5 cm x H: 55 cm Pos. 2: Crane runway 4x T-beams L: 7.16 metres x W: 22 cm x H: 54.5 cm 2x T-beams L: 6.25 metres x W: 22 cm x H: 54.5 cm 2x T-beam end pieces with stopper L: 6.93 metres x W: 22 cm x H: 54.5 cm Pos. 3: Crane runway 4x T-beams L: 5.90 metres x W: 21.5 cm x H: 55 cm 2x T-beams L: 4.10 metres x W: 21.5 cm x H: 55 cm 2x end pieces with stopper L: 6.05 metres x W: 21.5 cm x H: 55 cm Pos 5: 10 pieces support beam length 6.400mm with TT profile 180 x 180mm weight 2420 kg Subject to prior sale. If still available. Please ask exactly for which beams you are interested. Subject to prior sale. If still available. Please enquire exactly which girders you are interested in. *