Flexographic printer

UTECO ONYX 876

Condition: ready for operation (used), Year of construction: 2002, Flexoprinting machine CI type Bonardi Mira 1200 6 col. System: Sleeved Printing Width: 1200 mm Web Width: 1250 mm Printing Repeat (Max): 800 mm Printing Repeat (Min): 350 mm Plate-Cylinder Gear-Pitch Module: 5 mm Plate-Thickness, Sticky Back Included: 1,64 mm Drying System: Electrical Sleeve changeover central impression press Helical gears, pitch 5 mm Side register capability /- 10 mm Up-down register capability /- 7 mm Mechanical speed 250 m/min Web tension range 30-250 N Flexo inks solvent based and water No 6 pneumatic pumps Printing plate thickness 1,14 mm Cpedpfxjxuwane Ah Isw Sticky back adhesive thickness 0,50 mm Chill roller with OD 290 mm Double unwinder with automatic control tensión Electromagnetic powder brakes Pneumatic loaded dancer with two low inertia air cylinders Two air expandable shafts Reel max diam 700 mm Core diam. 3” Doble rewinder Two motors CA Pneumatic loaded dancer with two low inertia air cylinders Micro switch to stop the press in case the web breaks or reel end Marriage roll pneumatic operated to enable to splice to be carried out at reducer speed with operator intervention PRINTING MANDRELS Nr. 02 sets of Nr. 06 mandrels ANILOX ROLLERS A total package of 10 ceramic coated and laser engraved aniloxes 260,100, 140 l/cm SLEEVE AND REPEAT GEARS Repeat 5 set of printing sleeves 350, 400, 450, 550, 600 BANANA ROLLER 1 Banana at the infeed (before nip on top of the central drum). 1 Banana at the infeed (before rewinder )

Condition: good (used), Year of construction: 2004, General information: • Manufacturer: Edale Ltd. (UK) • Model: Sigma • Year of Manufacture: 2004 • Condition: Very good, regularly serviced • Availability: Immediately Technical Specifications: • Printing units: 8 x UV flexo o Configurable as 8 front-side or 4 front + 4 reverse • Die cutting units: 2 • Web Width: 510mm • Conversion Options: Roll-to-roll and roll-to-sheet • Turn bars: 2 (for front/back printing) • Register Control: Included • Drying System: UV curing on all units • Inspection: Camera-ready setup possible • Applications: Labels, films, flexible packaging, paper and carton • Included Accessories: Magnetic cylinders, printing cylinders, anilox rollers • Unwinder: Included • Rewinder: Included Additional details: • The machine is fully operational and has been well maintained. • Ideal for short to medium production runs with high flexibility. • All documentation available. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) Cpsdpfx Ahswmfzge Isw _____

Condition: used, Year of construction: 2003, Number of inking units 8 Max. printing width 900 mm Max. material width 950 mm Min. printing length 280 – 650 mm Max. mechanical machine speed 250 m/min Material to print: PE, OPP, Paper Repeat of design, 280 mm - 650 mm printing sleeves for 1.14. plates (more the 150 sleeves) printing sleeves for 2.54 plates (approx 50 cylinders) corona, slit, automatic winders quick sleeve and anilox change system Two edge guides Ink pumps Doctor blade system Codpfx Asw Hryvjh Iopw camera system

Condition: good (used), Year of construction: 2004, functionality: fully functional, product width (max.): 500 mm, We are offering an EDALE flexographic printing machine with a total of 8 printing units and two die-cutting stations. Cedpfx Ahsxhd A As Ispw

Condition: excellent (used), Year of construction: 2017, Gallus EM 430 S (6 colors) 1 rotary die-cutting unit - Automatic web tension control 0 – 400N (±5N) - Corona web treatment - Contact web cleaning - Longitudinal register control (all) - 1 mobile laminating station, unwind up to 800 mm diameter (10°–90° angle) - 1 variable position matrix removal up to 800 mm diameter - 2 winding and unwinding towers, variably usable up to 800 mm diameter - 2 web tension stations Cjdpeww U R Sjfx Ah Iepw The machine - is supplied without accessories - is offered without camera optics

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). We are happy to assist with this. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) Csdpfx Aoylyhdjh Ijpw • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)

Condition: excellent (used), Year of construction: 2007, Gallus EM 410 – 55 S 9 colors Year of manufacture: 2007 Complete rail system Unwinder for 1 meter roll diameter Splice detector Web break detectors Teknek cleaning system Corona treatment Antistatic system Ink pumps: 1 Knife cutting unit: 3 knives 6 printheads with IST UV units (9) Sensotec register control system Rotary die cutter (K1B Gap Master) AVT inspection system Rewinder compatible between both presses, selection required Cold foil unit (unwinder + rewinder) compatible between both presses Cold foil pressure cylinders: 2 Cold foil small cylinders: 2 Cpsdpfoxw U Axox Ah Iow Screen printhead Gen I: 2 available for both presses, selection required Screen printhead Gen II: 2 available for both presses, selection required Screen printhead Gen III: 2 available for both presses, selection required Mounting device: 2 available for both presses, selection required

Condition: excellent (used), Year of construction: 2005, Gallus EM410-21S 10 colors Year of manufacture: 2005 Complete rail system Csdsxw Uz Iepfx Ah Ijpw Unwinder for 1-meter roll diameter Splice detector Web break detectors Teknek cleaning system Corona treatment Antistatic system 6 printheads with IST UV curing units: 10 units in total Ink pumps: 3 Sensotec register control system Rotary die-cutting unit (K1B Gap Master) AVT inspection system Rewinder: compatible with both presses, selection required Cold foil unit (unwinder + rewinder): compatible with both presses Cold foil pressure cylinder: 3 Cold foil small cylinder: 3 Screen printhead Gen I: 2 available for both presses, selection required Screen printhead Gen II: 2 available for both presses, selection required Screen printhead Gen III: 2 available for both presses, selection required Mounting device: 2 available for both presses, selection required Additional ink chamber: 2 available for both presses, selection required Mounting device Additional ink chamber Tool list available on request

Condition: good (used), Year of construction: 2005, operating hours: 7,500 h, functionality: fully functional, machine/vehicle number: 3149, Fischer&Krecke Flexpress 16S with 1250 mm printing width. The machine is still in operation and can be viewed at any time. Fully functional and in well-maintained condition. Cedpfxoxqmn To Ah Iopw