Machines

verrschiedene verschiedene

3 Column drill press Alzmetall
6 Table drill press Flott
7 Table drill press Böhrer STB2
8 Table drill press Flott E1
16 Horizontal milling machine Este
17 Universal milling machine Optimum OPTI UF 100, because the C6A fuse (presumably control circuit) is tripping. Digital display in the X-axis counts, Y/Z axes do not count. The feed lever jams partially.
18 Universal milling machine Optimum OPTI UF 100 380 yes yes yes yes Gearbox "X-axis
Pgjdpfsz E Ht Aex Airot
Y-axis" Gearbox yes ? ? yes, X-axis spindle extension is bent, clamping lever is bent.
19 Universal milling machine Optimum OPTI UF 100 380 no yes yes yes Gearbox "X-axis
Y-axis" Gearbox yes ? ? yes, Y-axis has approximately 20mm of play.
20 Horizontal milling machine Steinel SH4 380 yes yes yes yes Gearbox X-axis Gearbox yes yes nA nA
26 Milling/drilling machine Zöllich ZAY7045FG 380 yes yes yes yes Gearbox nA nA nA nA nA nA, Handwheel for the Y-axis is defective, bellows are defective, protective cover is defective, oil level sight glass is defective/replaced with a wooden plug, knurled screw is defective.
28 Universal milling machine Maho MH300P 380 yes yes yes yes Stepless Not running Stepless yes ? nA yes, Feed does not work, a component is missing from the control panel, which is in the switch cabinet, varistors are defective, insulation of the PE line is melted, spindle play in the Z-axis is 0.2mm, spindle play in the Y-axis is 0.45mm, glass scale of the Z-axis is loose on one side, Heidenhain input panel has no display, Heidenhain input and zeroing of axis values is not possible, bellows are defective, tool clamping protective cover is defective, water pump strain relief is torn off.
30 Lathe Boley Theisen 380 yes yes yes yes yes yes yes yes ? ? nA, Glass scale mounted - digital display missing, (no chuck, no collets)
31 Lathe Weiler 380 yes yes yes yes Gearbox nA nA ? nA nA nA, Switch is defective, partially inoperative.
33 Lathe Kari E2N 380 yes yes yes yes Gearbox yes Gearbox yes ? yes nA, Machine cannot be switched on. Emergency stop is defective.
35 Lathe Dalian CDS6241 380 yes yes yes yes Gearbox yes Gearbox yes ? ? yes, Threading feed mechanism is defective, emergency stop foot pedal is defective, speed change lever is broken, digital display for the X-axis does not work, protective hose is torn from the strain relief.
36 Lathe Knuth SH180/1000G 380 yes yes yes yes Gearbox yes Gearbox yes ? nA nA, Electrical system is messed up, gear lever is very loud - probably gear damage.
42 Band saw Bauer HS260A 380 yes yes yes yes nA nA yes Stepless nA ? nA nA, Automatic operation is not possible because the counter is missing. Emergency stop jams slightly. Only the basic function is operational.
43 Cut-off saw Scheef 380 yes yes yes yes nA nA nA nA nA nA nA
44 Hacksaw Behringer KS200HY 380 yes yes yes yes nA nA no Stepless nA no nA nA, Hydraulic lifting and lowering does not work.
45 Hacksaw Behringer SUPERA275PU4 380 yes yes yes yes nA nA yes Stepless nA no nA nA, Switch housing is broken, hydraulic lifting and lowering only works via the hydraulic valve lever, "lift" and advance buttons are inoperative, other switches are inoperative.
46 Hacksaw Raim 250 380 yes yes yes yes nA nA yes Stepless nA no nA nA, On/off switch defective, no shutdown in upper end position (hydraulic cylinder extends), vise clamping lever missing.
50 CNC milling machine MAHO 600E defective

The listing was translated automatically. Translation errors are possible.