Used Verrschiedene Machines for sale (66,559)

Condition: used, 3 Column drill press Alzmetall 6 Table drill press Flott 7 Table drill press Böhrer STB2 8 Table drill press Flott E1 16 Horizontal milling machine Este 17 Universal milling machine Optimum OPTI UF 100, because the C6A fuse (presumably control circuit) is tripping. Digital display in the X-axis counts, Y/Z axes do not count. The feed lever jams partially. 18 Universal milling machine Optimum OPTI UF 100 380 yes yes yes yes Gearbox "X-axis Y-axis" Gearbox yes ? ? yes, X-axis spindle extension is bent, clamping lever is bent. 19 Universal milling machine Optimum OPTI UF 100 380 no yes yes yes Gearbox "X-axis Y-axis" Gearbox yes ? ? yes, Y-axis has approximately 20mm of play. 20 Horizontal milling machine Steinel SH4 380 yes yes yes yes Gearbox X-axis Gearbox yes yes nA nA 26 Milling/drilling machine Zöllich ZAY7045FG 380 yes yes yes yes Gearbox nA nA nA nA nA nA, Handwheel for the Y-axis is defective, bellows are defective, protective cover is defective, oil level sight glass is defective/replaced with a wooden plug, knurled screw is defective. 28 Universal milling machine Maho MH300P 380 yes yes yes yes Stepless Not running Stepless yes ? nA yes, Feed does not work, a component is missing from the control panel, which is in the switch cabinet, varistors are defective, insulation of the PE line is melted, spindle play in the Z-axis is 0.2mm, spindle play in the Y-axis is 0.45mm, glass scale of the Z-axis is loose on one side, Heidenhain input panel has no display, Heidenhain input and zeroing of axis values is not possible, bellows are defective, tool clamping protective cover is defective, water pump strain relief is torn off. 30 Lathe Boley Theisen 380 yes yes yes yes yes yes yes yes ? ? nA, Glass scale mounted - digital display missing, (no chuck, no collets) 31 Lathe Weiler 380 yes yes yes yes Gearbox nA nA ? nA nA nA, Switch is defective, partially inoperative. 33 Lathe Kari E2N 380 yes yes yes yes Gearbox yes Gearbox yes ? yes nA, Machine cannot be switched on. Emergency stop is defective. 35 Lathe Dalian CDS6241 380 yes yes yes yes Gearbox yes Gearbox yes ? ? yes, Threading feed mechanism is defective, emergency stop foot pedal is defective, speed change lever is broken, digital display for the X-axis does not work, protective hose is torn from the strain relief. 36 Lathe Knuth SH180/1000G 380 yes yes yes yes Gearbox yes Gearbox yes ? nA nA, Electrical system is messed up, gear lever is very loud - probably gear damage. 42 Band saw Bauer HS260A 380 yes yes yes yes nA nA yes Stepless nA ? nA nA, Automatic operation is not possible because the counter is missing. Emergency stop jams slightly. Only the basic function is operational. Psdpjz E Ht Ajfx Amxsgt 43 Cut-off saw Scheef 380 yes yes yes yes nA nA nA nA nA nA nA 44 Hacksaw Behringer KS200HY 380 yes yes yes yes nA nA no Stepless nA no nA nA, Hydraulic lifting and lowering does not work. 45 Hacksaw Behringer SUPERA275PU4 380 yes yes yes yes nA nA yes Stepless nA no nA nA, Switch housing is broken, hydraulic lifting and lowering only works via the hydraulic valve lever, "lift" and advance buttons are inoperative, other switches are inoperative. 46 Hacksaw Raim 250 380 yes yes yes yes nA nA yes Stepless nA no nA nA, On/off switch defective, no shutdown in upper end position (hydraulic cylinder extends), vise clamping lever missing. 50 CNC milling machine MAHO 600E defective

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, production capacity: 6,000 unit/h, The machine is operating flawlessly and has been under continuous Quadient maintenance. The latest service report from December 2025 is attached! TECHNICAL DETAILS Processing speed max.: 6,000 items/hour Document speed max.: 6,000 documents/hour Monthly volume max.: 300,000 filled envelopes/month Package thickness max.: 10 mm Package thickness for minimum clearance: less than 3 mm Minimum clearance in the depth direction with package thickness less than 3 mm: 6 mm Minimum clearance in the width direction with package thickness less than 3 mm: 16 mm Package thickness for increased clearance: 3–6 mm Minimum clearance in the depth direction with package thickness 3–6 mm: 12 mm Pedpfx Amszzqabjxjgt Minimum clearance in the width direction with package thickness 3–6 mm: 19 mm Envelope hopper capacity up to C5 max.: 800 pieces Envelope hopper capacity C4 max.: 500 pieces Envelope weight up to C5 min.: 70 g/m² Envelope weight above C5 min.: 90 g/m² Envelope weight max.: 110 g/m² Refilling possible during operation Envelope width min.: 225.5 mm Envelope width max.: 330 mm Envelope depth min.: 98.5 mm Envelope depth max.: 254 mm Flap length min.: 32 mm Flap length max.: 65 mm Envelope neck depth min.: 10 mm Envelope neck depth max.: 25 mm Minimum opening in the neck area: 70 mm Flap shoulder angle: 50–90° Neck angle: 5–20° MACHINE DETAILS Counter reading: 3,617,695 Voltage: 230 V AC Frequency: 50 Hz Fuse for envelope inserting head: 6.3 A Operating temperature: 18–28 °C Relative humidity: 30–80 % EQUIPMENT Tower feeder with 2 stations CIS reading Datamatrix reading Inserter for inserts up to A4 Enveloping module Output conveyor Conversion with C4 float switch Gluing possible with distilled water Matching base cabinet

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: M500.06133, overall weight: 15,000 kg, Emag VSC500 Vertical Turning Machine. Condition Good. Pgedjz Hc Nvspfx Amxst Weight 15,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: used, overall weight: 45,000 kg, Maus MTV4LSL500 Turning Machine/Drill. Pgodpez Hc Npofx Amxot Weight 45,000 kg. Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: used, machine/vehicle number: 008703, X axis working area: 3650 mm Y axis working area: 1600 mm Pedpfx Aezq Ur Tjmxogt Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 3 axes Total number of drilling spindles: 37 Total number of tool changer positions: 18

Condition: used, Year of construction: 2008, machine/vehicle number: LV082, overall weight: 44,000 kg, Pittler PV1250 Vertical Turning Machine/Drill. Weight 44,000 kg. Condition Machine needs work. Pedpjz Hb U Refx Amxjgt Delayed removal unit will be ready for removal by the end of September. Buyer responsible for removal, contractor must be licensed and insured.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: AB1052, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, controller model: Siemens Sinumerik 840D, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 560 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 410 mm Table length: 650 mm Table width: 450 mm Table load capacity: 250 kg Workpiece length: max. 650 mm Workpiece width: max. 450 mm Workpiece height: max. 450 mm Workpiece weight: max. 250 kg Feed rate, X-axis: 30 m/min Feed rate, Y-axis: 30 m/min Feed rate, Z-axis: 30 m/min Accuracy: ±0.015 mm Spindle speed: max. 12,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840D Input voltage: 400 V Input current type: Three-phase Dimensions & Weight Dimensions (L x W x H): 2,000 x 3,000 x 2,500 mm Total weight: 4,000 kg EQUIPMENT Oil mist separator Spindle cooling (20 bar) Documentation ShopMill function Pgjdpfxozzx H Ao Amxet Note: The machine has been regularly maintained electronically and mechanically. New ball screws and linear guides were installed approximately 2 years ago.

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type Psdpfx Ajh S Uhfsmxogt to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: used, machine/vehicle number: 008238, X axis working area: 3660 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Total number of tool changer positions: 15 Pedox A E Tfopfx Amxjgt

Condition: used, Year of construction: 2010, The Maximum Machines UG PSV 600, manufactured in 2010, is a machine with a format of 600 mm. It is currently in stock and located in Germany. This pressing unit with a vertical stacker is PLC-controlled and features automatic shingle control, multiple counters, and a batch counter. It offers better information through the PLC display, easier setting, and enhanced efficiency with a stronger pressing unit. Additionally, it is equipped for 2-up operations. The delivery terms are FCA. Format: 600 mm Pgsdpfx Aovfxx Djmxst Equipment: PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Stronger pressing unit - batch counter - 2-up-equipment

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Pgedpfx Asu Eviqemxet Gluing System: EVA Hotmelt

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pjdpfsz Ag A Ijx Amxsgt Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase Pgedpjzzx Hcofx Amxjt EQUIPMENT CE marking Chip conveyor Spindle speed continuously adjustable 20 bar spindle cooling Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Pgedpfx Amjz Agzqexst Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Complete P20 & P30 HVAC Duct Flange Profile Roll Forming Lines with Butyl Sealant System For sale is a complete set of two professional roll forming lines for the production of P20 and P30 flange profiles, used in the manufacturing of rectangular HVAC ducts and fittings. The set includes: - P20 flange profile production line - P30 flange profile production line Both machines are equipped with an integrated butyl sealant application system. Depending on production requirements, the profiles can be manufactured with or without factory-applied butyl sealant. This provides full flexibility and allows the finished profiles to be adapted to different duct manufacturing technologies and customer requirements. The machines perform the complete production process – from coil decoiling, through multi-stage roll forming, to automatic cutting of the finished profile to the required length. Technical highlights - 18 roll forming stations - Automatic PLC-controlled cutting system - Production speed up to 9 m/min without sealant application - Production speed up to 5 m/min with butyl sealant application - Integrated butyl sealant application system - Complete production lines for P20 and P30 profiles Both machines are in very good technical condition. Since new, they have been used exclusively for the production needs of our own HVAC duct manufacturing facility. They have not been used for continuous mass production of profiles for commercial sale, therefore their overall level of utilisation is relatively low. Both production lines are fully operational, properly adjusted, tested and ready for immediate production. The machines are offered as a complete P20 + P30 set, allowing the buyer to establish in-house production of the two main flange profile sizes commonly used in the manufacturing of rectangular HVAC ducts and fittings. Relocation and commissioning support We can provide technical assistance with dismantling and relocation of the machines. We can also support the buyer with installation, adjustment, testing and commissioning at the new production facility, helping to ensure that both lines are properly set up and ready for production after relocation. Pgsdpfx Aszx Rz Homxjt The machines can be inspected while in operation, and production tests can be carried out prior to purchase. The indicated price is NET and VAT will be added where applicable.

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Pgedpfjum H Ekex Amxjt Total number of tool changer positions: 13

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Pjdpfx Amjwuclxsxegt Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: used, machine/vehicle number: 008014, Max. panel length: 1250 mm Lateral horizontal groups: yes Pgedswuz S Dspfx Amxot

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Pgsdpfxshwi U Tj Amxjt Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Pgjdjz Agzdepfx Amxot Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Year of construction: 2024, condition: good (used), functionality: fully functional, We are offering this well-maintained em machines Liquid Mate Sense Premium monitoring and control system for cutting fluids, manufactured in 2024, featuring a completely new set of sensors. Manufacturer: em machines Model: Liquid Mate Sense Premium Year of manufacture: 2024 Psdpfx Ajzm Hahsmxjgt Condition: good Category ID: 661 Type: Monitoring and control of cutting fluids The LiquidMate Sense Premium is an innovative, standalone plug-and-play solution for fully automated monitoring and control of cutting fluids in individual machines and central systems. It precisely measures concentration, pH value, and temperature, monitors the fill level, and actively regulates the cutting fluid. A major advantage is the circulation monitoring, which ensures regular movement of the cutting fluid and prevents bacterial growth and fungal contamination. The solution is low-maintenance, easy to install, and offers versatile connectivity, including an integrated online dashboard for convenient remote monitoring. LiquidMate is CE and UKCA certified and works with all common cutting fluids, contributing to environmentally friendly and cost-effective operation. If you have any questions or require further information, please send us a message or call us. We have 11 of these units available, and the machines can also be inspected. We can also offer them as a package.

Condition: used, machine/vehicle number: 008700, X axis working area: 3050 mm Y axis working area: 1300 mm Main Electrospindle power: 7.5 KW Podpfxezq Ur Hj Amxsgt Number of controlled axes: 3 axes Total number of drilling spindles: 52 Total number of tool changer positions: 6

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: Pedpfxow Ty S Ss Amxsgt - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Pjdpfez Ahrwex Amxjgt Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Pgsdpsz Ag Abefx Amxjt Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories