CNC Roll Grinder Waldrich Siegen

Waldrich Siegen

Condition: good (used), Manufacturer: WALDRICH SIEGEN Type: WS-2A x 6000 Control: Lismar Year of manufacture: 1976 Covex and Concave grinding 2 steady rest included LISMAR surface deflection measuring system Coolant filtration system Some stones & Flanches included Specifications Metric US Standard Center height 450 mm Grinding diameter Ø 900 mm Grinding length 6000 mm Grinding stone speed 720 - 1800 Rpm Dimensions (estimate) Dq7J8B Length 14000 mm Width 4250 mm Height 2500 mm Weight 58000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: excellent (used), Year of construction: 2006, turning diameter over bed 2000 mm turning diameter over slide rest 1600 mm turning length 22.000 mm turning diameter 2000 mm turning length 20.500 mm control SIEMENS SINUMERIK 840 D workpiece weight 70.000 KG total power requirement Hauptmotor 110 kW LATHE FOR HEAVY MACHINING _____ CONVERSION TO CNC_____ 2006 _____TOP WIDTH_____ 22.000 mm _____MAXIMUM TURNING LENGTH_____ SUPPORT 1 20,000 mm SUPPORT 2 20,500 mm Dqmdz9 ___LARGEST TURNING DIAMETER ___ ABOVE SUPPORT 1600 mm ABOVE BED 2000 mm _____ WORKPIECE WEIGHT_____ Max. 70,000 KG _____PLANNING DISC_____ DIAMETER 2000 mm SPEED OF THE FACEPLATE, INFINITELY VARIABLE IN 4 STEPS 1.2 - 75 rpm MAXIMUM TORQUE AT CHARACTERISTIC SPEED 5.65 170,000 Nm MAIN ENGINE 110 kW LARGEST CLAMPING DIAMETER ON THE HEADSTOCK 1640 MM LARGEST CLAMPING DIAMETER ON THE TAILSTOCK 920 MM MOUNTING IN THE ROLLER BLOCK (PASSABLE) 2 PIECES 600 - 1290 mm MOUNTING IN STEADY RESTS (PASSABLE) 100 - 775 mm CONTROL SIEMENS SINUMERIK 840 D _____ SUPPORT 1 (TO THE HEADSTOCK) _____ TRAVEL OF THE UPPER SUPPORT 550 mm SLIDING MOVEMENT OF THE PUSHER 400 mm RAPID ADJUSTMENT LENGTHWISE (RAPID TRAVERSE) 3000 mm/min QUICK ADJUSTMENT FLAT (RAPID TRAVERSE) 1500 mm/min SLIDE HOLDER SITZMANN-HEINLEIN SYSTEM FEEDS STEPLESS FOR LONGITUDINAL 0.5 - 3000 mm/min FEEDS STEPLESS FOR FLAT 0.5 - 1500 mm/min _____ SUPPORT 2_____ MOVEMENT OF THE UPPER SUPPORT 550 mm SLIDING MOVEMENT OF THE SLIDER 400 mm RAPID ADJUSTMENT LENGTHWISE (RAPID TRAVERSE) 3000 mm/min QUICK ADJUSTMENT FLAT (RAPID TRAVERSE) 1500 mm/min SLIDE HOLDER SITZMANN-HEINLEIN SYSTEM FEEDS STEPLESS FOR LONGITUDINAL 0.5 - 3000 mm/min FEEDS STEPLESS FOR FLAT 0.5 - 1500 mm/min _____ RIDING STOCK_____ DIAMETER OF THE FACEPLATE 1200 mm QUILL DIAMETER 350 MM MAXIMUM ADJUSTMENT TRAVEL OF THE QUILL 150 mm CENTER POINT ANGLE 70° QUICK ADJUSTMENT ON THE BED 1850 mm/min _____ Revolutions of the faceplate per minute _____ 1st stage Motor speeds: 130 - 630 - 1575 Faceplate speeds: 1.2 - 5.65 - 14.2 2nd stage Motor speeds: 630 - 1575 Faceplate speeds: 10.8 - 27.2 3rd stage Motor speeds: 630 - 1575 Faceplate speeds: 15.5 - 38.8 4th stage Motor speeds: 630 - 1575 Faceplate speeds: 30 - 75

Condition: used, Max. turning diameter: 650 mm Min. turning diameter: 200 mm Max. turning length: 4000 mm Max. workpiece weight: 10 tons Center height: 400 mm Faceplate diameter: 650 mm Speed: 1 - 58.4 rpm K3Dggj3Nw Drive power: 45 HP Tailstock

Condition: like new (used), Year of construction: 1989, machine/vehicle number: 13.152, 3 axis CNC heavy duty roll/turbine lathe WALDRICH SIEGEN, model DH 1600 x 12000, max. work piece dia. 1.600 mm, max. turn lengths 12.000 mm, max. work piece weight 40 t, hydrostatic guide ways in Z and X, Bftq3Jbo9Z C axis in the face plate, hydrostatic worm drive, 2 chip conveyor, machine in as good as new condition Option: new CNC Control SINUMERIK 840 DsL, new Electric, new axis motors, new wiring and installation and commissioning in customers plant

Condition: refurbished (used), Functionality: fully functional, Machine type: Portal milling machine LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Storage location: Gera Country of manufacture: Germany Freight basis: ex stock location / in Germany + VAT Technical Data: Travels X-axis 14.000mm table lengthwise Y-axis 4.480mm slide-transverse Z-axis 3.000mm crossbeam vertical W-axis 300mm quill vertical Max. clearance: transverse 3,200mm high 3.800mm Machine table: Length 14,770mm width 3.100mm max. table load: 145 tons Quill: Tool taper: ISO60 power 100KW max. torque max. speed 600 rpm Rapid traverse: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Clamping: manual Designation: Right-angle milling head (ISO60) Vrsdaoz3 Orthogonal milling head (ISO60) Notes: Table guide hydrostatic New hydrostatic design calculated for max. load 450 tons (with uniform load) Further attachment heads available that were not previously used

Condition: used, Year of construction: 1987, Functionality: fully functional, Angle milling head - Manufacturer: Waldrich Siegen - Model: ET500 - Order no.: 11290/731 Bke0M73Brez

Condition: good (used), Year of construction: 2012, grinding width: 2,000 mm, workpiece weight (max.): 18,000 kg, grinding length: 8,000 mm, Manufacturer: Waldrich Coburg Bn7Ezermol8 Type: 30-10 S 3640 Control system: SIEMENS 840D Year of construction: 2012 Guideway / Slide way / Surface Grinding Machine Universal grinding head S10 with 110 Degree tilting / 2500 Rpm / 7.5 kW Vertical grinding head S30 with Ø 600 x 150 / 930 Rpm / 22 kW Double SIEMENS 840D Control panel Left & Right side machine KNOLL HL650/4000 Filtration system new 2023 Automatic doors (4x) for easy machine / load / clamping acces Hydraulic table drive with 18000 kg work load Rebuild in 2012 for 1.5 Mil EUR Large package flanches and stones Large package spare parts / ballscrews / measuring / protection covers Specifications Metric US Standard X - axis 8825 mm Y - axis 3010 mm Z - axis 2500 mm Table length 8000 mm Table width 1800 mm Table load 18000 Feed X - axis 1 - 45.000 mm/min. Feed Z-axis 100 - 3000 mm/min. Grinding stone dimensions 600 x 150 mm Power output 22 kW Rotational speed 930 rpm Coolant system Knoll 4000 L Feed Y - axis 1 - 700 mm/min. Dimensions (estimate) length 24360 mm width 9550 mm height 7000 mm weight 80200 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, Distance between columns 2.750 mm, Distance top of table to spindle nose 1.600 mm, fixed cross rail, 2 tables 2.500 x 4.000 mm, coupled 2.500 x 8.700 mm, power 58 kW, revs 1 – 1.800 rpm, base speed 136 rpm, max. torque 3.500 Nm, feeds and rapids 1 – 10.000 mm/min, traverses x y z 9.502 x 5.515 x 1.000 mm, quill movement 500 mm in 4 steps, automatic tool changer with 60 pockets, automatic mounting, 4 x 90° indexing and heel clearance for RAA Electric and mechanic remanufacturing in 2017 with • New CNC control SINUMERIK 840 D or at your choice Mtzwpg • New electric cabinet • New wiring • New motors for all axis and main spindle • New measuring system HEIDENHAIN LB 382 • Milling carriage general overhauled • New painting

Condition: good (used), - Make : Waldrich - Siegen - Typ : PF-F-150(1)-530/400 - No. : 11.093/0 - Age : Overhault 2004 ( Euro 2.2 Mil) - X Travel : 12.000 - Y Travel : 7.300 - Z Travel : 3.000 - W Travel : 4.000 - Between column : 5.000 - Table width : 4.730 - Table length : 12.000 - Table load : 19 t / mtr. Ca. 250 ton Xrd7Juab - Table feed : 10.000 mm/min. - W axis : 3.000 mm/min. - T axis : 6.000 mm/min. - Cross adj. milling head : - Vert. adj. cross rail : - Horizontal hydrostatic spindle ram - Milling spindle Ø : 560 - Milling tool taper : iso 60 - C axis feed : 5.000 mm/min. - Milling motor : 90 kW - Spindle speed : 2.500 R/pm - Z axis stroke : 3.000 - Z axis feed : 2.000 mm/min. - Milling Küma Angle head WF2 90 kw- 450 - Milling Küma Uni. UB1D 60 kw - 2400 - Milling Küma Fixed GB1D 90 kw- 2400 - Milling Küma Angle head WF1? - Electric requirement : 3 x 400 V / 50 Hz - Power requirement : 600 kVA / 630 Amp - Capacity 4.000 L coolant true spindle 20/40 Bar Machine is rebuild in 2004 by Schiess Bed – Table assembly group: * Renewal of sliding lining * Grinding of guideway * Renewal of table drive * Direct linear measuring syst. * Hydrostatic Portal and cross rail: * Modification of adjusting spindle trape Zoidal spindle was recplaced with ball screw * Direct linear measuring syst. * New drive motors for relization of higer speed on feed axes of milling support. * New milling support with hydrostatic guideways Electric system: * Complet elctric cabinet switchgear * Complet new wire * Siemens Sinumrik 840 D in 6 axis !! Equipment / parts : * Complet new raumag janich covers * Complet new double chip conveyor * Complet with big tooling packet * Complet with big mounting equipment - Under power in Europe - Free directly - Controlled axis X / Y / Z / W / C / B axis - Over all height : 10.475 mm - Over all width : 11.934 mm - Over all length : 30.000 mm - Total weight : ca. 350.000 Kg Please Note: The above information has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details !

Condition: excellent (used), Year of construction: 1962, machine/vehicle number: 12.178, CNC roll grinder WALDRICH SIEGEN, 1996 converted into a CNC machine through HERKULES. Max. grinding dia 1.200 mm, max. grinding lenghts 5.000 mm, max roll weight 25 t between the Centers.The machine get a new Imxsyhdx CNC Control, new Electric Cabinet, new motors, new wiring and new measuring System in 2023. The machine can be inspected after Appointment in our warehouse.

Year of construction: 2003, Condition: good (used), Functionality: fully functional, Horizontal machining center with hydrostatic guides X, Y, Z for highest precision TECHNICAL DETAILS X-travel: 2000 mm Y-way: 1250 mm Z-path: 1400 mm speed: 20 - 5.000 rpm torque: 750 Nm tool holder: HSK 100 control: SIEMENS 840D tool changing device: 60 positions Pallet size: 1250 x 1250 mm spindle: 20 kW rapid traverse X-Y-Z: 18 m/min table load: 3 / 5 t MACHINE DETAILS Huyhr8G machine weight: approx. 15 t Space requirement: approx. 10.5 x 8.5 x 4.1 m EQUIPMENT NC rotary table 2-fold pallet storage Control panel for loading station IKZ 3D measuring probe Chip conveyor Packing for international transport is exclusive! EXW provision is also possible.

Condition: used, Year of construction: 2006, turning diameter 3000 mm swing diameter 3000 mm turning height 800 mm Control Sinumerik 840 D Diameter hydraulic chuck 2800 mm speed range step 1 1-30 rpm speed range step 2 4-120 rpm max. power capactiy 250 kW max. torque 215000 Nm max. load 20000 kg dimensions of the machine ca. 16,9 x 13,2 x 5,6 m Telescopic steel cover between the supports - Support right, horizontal (X-axis) -150/+1750 mm - Support left, horizontal (U-axis) -1750/+150 mm Right and left support for turning: - Cross-section of the chisel slide 320 x 320 mm - Smallest plunge diameter approx. 450 mm - Max. cutting force when turning up to chisel slide extension 75000 N CNC axis: - X-axis right support, horizontal - U-axis left support, horizontal Bpj9Boehee - Z-axis right chisel slide, vertical - W-axis left chisel slide, vertical Equipment/accessories: - Internal coolant supply - Chip conveyor - Measurement of turning tools - Automatic changing system for machining units - Inspection station for machining units

Condition: ready for operation (used), - USED - BRIDGE-TYPE MILLING MACHINE WITH MOBILE TABLE AND MOBILE CROSS BEAM LONGITUDINAL TRAVEL: 9000 mm TRANSVERSAL TRAVEL: 2950 mm VERTICAL TRAVEL: 1250+2200 mm RAPID FEEDS L-T-V: 3 - 3 - 2 m/min TABLE SIZE: 2800 x 8000 (5000+3000) mm MAX ADMITTED LOAD: 64000 Kg SPINDLE: 20 - 600 rpm; 100 kW; 13000 Nm; ISO 60 DISTANCE BETWEEN UPRIGHTS: 3200 mm DISTANCE SPINDLE NOSE-TABLE: 2806 mm OVERALL DIMENSIONS: 21000 x 7800 x 6650 mm Qz9Q3Pzf ACCESSORIES: GEAR BOX NOTE: No 1 90° HEAD; No 1 REDUCED 90° HEAD; No 1 VERTICAL EXTENSION; No1 TILTING HEAD; 3-STEPS GEAR BOX

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix Dq77Sz - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254326, Offer 22407 Technical data: 2Mby3Sbr - Cutting length 250 mm - cutting angle 90 ° - Cutting thickness - mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm - stroke rate up to approx. 55 /min - table size W 800 x D 800 mm - working height approx. 940 mm - fences steplessly adjustable in length and degrees - drive 400 V / 4 kW - oil filling 50 l - E - foot switch - space requirement approx. W 800 x H 1250 x D 900 mm - weight approx. 700 kg

Condition: excellent (used), Year of construction: 1994, operating hours: 1,930 h, Functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total length: 15,000 mm, table length: 5,000 mm, total width: 15,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total height: 7,500 mm, table height: 1,350 mm, distance between stands: 3,500 mm, type of input current: AC, table load: 65,000 kg, workpiece weight (max.): 65,000 kg, distance table center to spindle nose: 2,300 mm, overall weight: 210,000 kg, spindle motor power: 50,000 W, MACHINE DATA Machine type: Portal milling machine - double column for continuous 5 axis operation Manufacturer: WALDRICH COBURG Model: 15 S - 10 FPF 300 NC Year of construction: 1994 Condition: Fully refurbished 2015 Functionality: fully functional Operating hours: 1,931 h TECHNICAL DETAILS Number of controlled axes: 5 travel distance X-axis: 7,200 mm travel distance Y-axis: 4,200 mm travel distance Z-axis: 1,750 mm spindle speed (max.): 4,000 rpm working width: 3,500 mm PROVISION Machine location: Ljubljana, Slovenia Availability: now Delivery conditions: FCA Pick up at location: Ljubljana Shipping costs: upon request Planer-milling machine - double column: completely overhauled in 2014 / 2015 by Waldrich Coburg (basically everything except the casting): > New control unit > New cables > New motors > New electrics > Guideways overhauled DESCRIPTION - Heavy double-column machine for processing complex shapes - 2 pallet stations with 2 pallets (load capacity 65t each) - Machine with CNC control SIEMENS 840D sl - In 2014, conversion of the control system to SIEMENS 840D sl (incl. complete cabling and control cabinet) - in 2015 replacement of all axis motors - Various angle milling heads - NC-controlled milling head with 50 kW milling power / clamping 2.5° each with Hirth serration (type USP300C450F15S) - 2-axis NC-controlled fork head with 40 kW milling power (type UFN00SZ500) - Automatic tool changer for 76 tools (ISO 50 and 60) TECHNICAL DETAILS Travel X / Y / Z: 7,200 / 4,200 / 1,750 mm Milling width: 3,500 mm Distance spindle nose to table: 2,300 mm Milling power: 50 kW Speed: 10 - 4,000 rpm Front spindle diameter: 150 mm Bfngq8Ys03 Spindle holder: ISO 60, ISO50 Control: Siemens 840D sl Pallet size: 3,000 x 5,000 mm Pallet load: max. 65 t Number of pallets: 2 pieces Tool changer: 76 slots Feed rate: 10 - 15,000 mm/min MACHINE DETAILS Pick-up power: 92 kW Weight: 210 t Spindle hours: 1,931 h Switch-on time: 7,870 h Bed dimensions: 12.5 x 2.3 x 0.78 m; 28.5 t Pallet dimensions: 5.35 x 3.0 x 0.4 m; 22 t Main pallet carrier dimensions: 5.1 x 2.9 x 0.5 m; 25 t Dimensions of bed section: 3.8 x 2.9 x 0.5 m; 10 t Milling spindle box dimensions: 4.1 x 1.9 x 1.5 m; 13.5 t Left/right column dimensions: 4.1 x 1.3 x 1.7 m; 10.5 t Exhaust air slide dimensions: 8.5 x 0.7 x 1.2 m; 1.1 t Control cabinet dimensions: 7.9 x 0.6 x 2.1 m; 2.8t

Year of construction: 1991, Condition: ready for operation (used), General Data Measurements width 6610 mm Measurements depth 11500 mm Measurements height 5170 mm Machine weight 45800 kg Dq2Q7L Workpiece Workpiece weight 11000 kg This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information. Application Types Grinding

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Dq0Rnr Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: good (used), Year of construction: 1979, Functionality: fully functional, More detailed technical specifications are written in the attached document. Fixed table length: 36000 mm Fixed table width: 6000 mm Distance between columns with covers / without covers: 6900/7100 mm Gantry travel: 30000 mm Cross rail travel: 3100 mm Machine dimensions (L, W, H): 43000 x 12000 x 10000 mm Uj88T2Ojld

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min Bgjo2Arh0K transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

Year of construction: 1990, Condition: good (used), machine/vehicle number: V 254xxx, Lg. no. 22462 Technical data: - Cutting length 250 mm - cutting angle 90 ° Qk8X0Vk - Cutting thickness - mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminum up to 5 mm - stroke rate up to approx. 55 /min - table size W 800 x D 800 mm - working height approx. 940 mm - stops steplessly adjustable in length and degrees - drive 400 V / 4 kW - oil filling 50 l - E - foot switch - space requirement approx. W 800 x H 1250 x D 900 mm - weight approx. 700 kg

Condition: like new (used), Sell Waldrich coburg slide grinding machine causes higher machine investment. Stroke: 7500 x 2200 x 1600 2 grinding heads (1 flat and 1 swivel) Machine in perfect condition, rebuilt in geometry in 2017 with few operating hours. 2Rvrza Visible in France, Burgundy region

Condition: good (used), Year of construction: 1977, Slideway grinding machine Waldrich Coburg model 50-15 S6060 3000X12000 Year of manufacture 1977 Dqztbl Main technical data: table size 3000x12000mm distance between columns 3600mm grinding length 12000mm grinding height 3000mm max. workpiece weight 58000kg

Condition: excellent (used), Year of construction: 1968, Functionality: fully functional, Table dimensions=2000X10000mm; Cross-rail travel=2100mm; Dpsxxn Workpiece maximum weight=24500 kg; Overall size: L = 23000 mm, W = 7000 mm, H = 7000 mm I have attached a document containing additional specifications regarding this machine.

Condition: good (used), Year of construction: 2005, x-travel 6000 mm y-travel 3500 mm z-travel 1500 mm control SIEMENS 840D table load 12 t Dq77Rr height over floor 6300 mm table dimension - longitudinal 5000 mm table dimension - cross 2500 mm no. of tables 2 tool change unit 200 -fach weight of tools max. 30 kg tool taper HSK A 100 diameter of tools max. 250 mm workpiece length 500 mm spindle turning speed range 5-6000 U/min c-axis -10 bis 370 ° b-axis 5 bis -95 ° column daylight 3000 mm distance spindle nose and table 1500 mm weight of the machine ca. 161 t dimensions of the machine ca. 20.5 x 11 x 6.3 m This WALDRICH-COBURG Valutec portal milling machine is in very, very good condition and can be beautiful condition and can be inspected by arrangement with the seller.