Lathe

Weiler Matador

Condition: good (used), functionality: fully functional, + Multifix "A" baseplate + Three-jaw chuck + Collets + Coolant pump Center height approx. 150mm Swinging diameter over support 160mm Swinging diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 RPM Bedoz Hatlepfx Ahmoln Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (LxWxH): 150 x 70 x 150cm Weight: 600Kg

Condition: excellent (used), Year of construction: 2004, I sell the horizontal wood shredder DI Mechanik SDOP 400/3, Made in Slovakia Year 2004 Cylinder system with 3 knives. Bljdpfx Ahst S Eunomsn 400x150mm input in the shredder Motor 30KW Productivity apprx 5-7 m3 / hr. Condition like new. Avialable immediately.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm Bjdpfx Ahsxacgdomsln turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. Bljdpfx Ajxq Hhyshmsn range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - Emergency stop button - Operating instructions

Condition: good (used), Technical specifications for the crate rack: Shelving system: Stow Type: Midirack Technical specifications for installation: Number of shelf rows: 1 Shelf length: 1,910 mm Number of bays per shelf row: 1 The scope of delivery includes: 2x shelf uprights, used Material color: Sendzimir galvanized Upright profile dimensions: 55 x 45 x 1.5 mm Incl. cross and diagonal braces, Footplates The uprights are pre-assembled 2,000 mm high 600 mm deep Bedpfx Ahjv E H Iyemsln 10x shelf crossbars, used Material color: white Z-profile: 77 x 32 mm Weight | Unit: approx. 3.95 kg Hooks: 2 hooks Clearance: 1,800 mm 20x locking pins, used Material color: Sendzimir galvanized To secure the longitudinal beams against accidental removal 5x chipboard panels, used Thickness: 22 mm Width: approx. 1,780 mm Depth: approx. 590 mm Surface: coated if necessary (two-part if necessary) 20x folding boxes, used Manufacturer: Bekuplast Color: Red Material: Polypropylene External dimensions: approx. 600 x 400 x 285 mm (LxWxH) Internal dimensions: approx. 555 x 360 x 272 mm (LxWxH) Handles: open end / closed end Weight: 2.93 kg each Pieces Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - collet holder with lots of collets - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support Bodpsxaccxefx Ahmeln - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Bljdpfxoxacire Ahmon Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: good (used), functionality: fully functional, Subject to differential taxation according to §25a of the German VAT Act. You will receive a regular invoice. Internal article number: 26057 Lathe Weiler Matador + Multifix "A" baseplate + 3-jaw chuck + Collets + Coolant pump Center height approx. 150mm Turning diameter over carriage 160mm Turning diameter over bed approx. 300mm Distance between centers approx. 500mm Spindle bore approx. 36mm Speed range 30 - 3500 rpm Automatic longitudinal/cross feeds Tailstock MK3 Dimensions (L x W x H): 150 x 70 x 150cm Weight: 600kg Blsdpfszx R R Ijx Ahmsn The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our heated storage area of over 500 m².

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Blsdpjxp Rvlsfx Ahmjn

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Bsdpfx Aoxp Ru Ujhmjln

Condition: ready for operation (used), Leading and feed spindle lathe Weiler Matador -Distance between centers: 500 mm Bljdpfx Ajztbbtjhmon -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Chuck guard -Forkardt F 160 three-jaw chuck with wedge shank -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted.

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. Blsdpfozr Rnyex Ahmon -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.