Center lathe

Weiler Praktikant 160 B

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Kljdpfx Aajzd Tycezju Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Klodpfx Ajx Utc Ioazou Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Various turning tools Hand tools The machine can be inspected under power.

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Kedpow Sdr Hsfx Aazelu Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Ksdey D N Daopfx Aazslu Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Klodpsy Rpr Rsfx Aazju Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: Kljdohy Tdyopfx Aazou - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Kjdpewhzdmjfx Aazolu Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout K&C NEW Technical data: >> Year of manufacture: 1986, machine number 86-160-348 >> Center height: 160 mm >> Distance between centers: 650 mm >> Spindle speeds: 8 steps; from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: 0.02 to 0.63 mm/rev >> Usable threads: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg Kledswthbiopfx Aazou >> Spindle brake switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal >> Collet clamping device, collets as new from 1 to 29 mm in 1 mm increments >> 160 mm new three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear wall >> Machine leveling feet >> Coolant device About the machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe built to toolroom precision in very good condition. The machine is, of course, fully functional. The Weiler was completely dismantled and newly painted in light grey. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces as if ground. Take the opportunity to inspect the machine under power on site and verify its condition for yourself.

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice Kodpfou H U S Hex Aazolu - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation