Wood shredder

WEIMA WL 4

Condition: used, Year of construction: 1992, functionality: fully functional, fuel type: electric, – German-made – Year of manufacture: 1992 TECHNICAL PARAMETERS: - Feed opening: 600 x 800 mm - Rotor diameter: 175 mm - Rotor length: 600 mm - Total power: 18.5 kW - Number of knives: 14 pcs Hjdpfx Aiew Iqbys Tsw - Rotating crown cutting knives: 30 x 30 mm - Screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC DRAWER - Height of pressure drawer: 180 mm - Rotor speed: 80–120 rpm - Extraction connection diameter: Ø 200 mm - Dimensions (L/W/H): 200 x 120 x 120 cm - Weight: 1200 kg

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Hedez A H Saepfx Ai Tew

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Hjdpfx Ajbtnftei Tew Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and slow-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen hole size: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Hodpfx Aisbunq Hj Tew Rubber vibration dampers 2nd knife row Log spacer (free-cutting hopper) Location: 54634 Bitburg Available immediately

Condition: good (used), Used shredder in good condition for sale. Serviced in September 2026. * Available at a special price of €9,950 net plus VAT, ex works Neckartailfingen. For shredding hard and soft wood of all kinds. Engine: 15 kW Hodpfx Aijzu Rz Ss Tow Weight: approx. 1,300 kg Used machine, sold as is. Functional guarantee upon delivery.

Condition: excellent (used), Weima WL4 wood chipper 18.5 kW engine 600 mm rotor length Hodpfx Aioz Ip Dcj Tsw 28 knives on the rotor, V-rotor Hydraulic infeed hopper Automatic reversing function 20 mm screen Machine with very low operating hours. Used machine, its condition is only slightly different from a new machine. Weight approximately 1300 kg.

Condition: refurbished (used), functionality: fully functional, overall weight: 1,300 kg, WEIMA WL 4 shredder, 18.5 kW Machine for shredding production waste from wood processing, furniture manufacturing, pallets, CLT, particleboard, rubber, and plastics. Mounted on vibration-damping legs. Hsdsz En Nrjpfx Ai Tow The machine is in fully working condition and has undergone the following repairs: 1. Bearing replacement on the shaft. 2. Complete gearbox service with replacement of 3 sets of bearings. 3. Replacement of the sliding rails of the drawer. 4. New rotor knives. New stationary knives. 5. Replacement of the hydraulic pump. 6. New gearbox and hydraulic oils. 7. New hydraulic hoses. 8. New oil filter. 9. Sandblasting and powder coating of the entire machine. Technical specifications: POWER: 18.5 kW NUMBER OF SHAFTS: 1 SHAFT LENGTH (mm): 600 mm SHAFT DIAMETER (mm): 252 mm ROTATION SPEED: 90 rpm NUMBER OF KNIVES: 14/28 SCREEN SIZE: 15 mm MACHINE DIMENSIONS: 200 x 160 x 120 cm MATERIAL: wood waste FEED OPENING DIMENSIONS (mm): 600 x 800 mm WEIGHT (kg): 1300 kg

Condition: good (used), Shredding machine Rotor approx. 250 mm Hodjz Ea Tpopfx Ai Tew Hydraulic slide Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Functionality tested Technical data available upon request.

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Year of manufacture: 2003 Operating hours: approx. 1,244 h Hodpoz Ai N Rsfx Ai Tsw Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: used, Year of construction: 1999, Used wood shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 1999 Hodpjzu Ap Uofx Ai Tsw Technical data V - Rotor Motor 18.5 kW 400 V, 49 A, 90 rpm Feed opening 800x600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.