Used Weima Wood Shredder for sale (90)

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ Pgjdpfxeh Hnp Ds Agqjw working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: excellent (used), Year of construction: 2012, operating hours: 272 h, power: 18.5 kW (25.15 HP), Weima WL4 Shredder Rotor diameter: 252 mm Rotor width: 600 mm Rotor speed: 90 rpm Pgedjxyknvopfx Agqew Screen hole size: 20 mm Drive power: 18.5 kW Weight: approx. 1,300 kg Only 272 operating hours The machine has seen very little use (practically unused).

Condition: good (used), Year of construction: 1998, High-performance shredder with 1.2 m rotor width Podpfxexwwvus Agqjgw Large rotor diameter of 368 mm with 64 blades 37 kW motor Engine and gearbox replaced 6 years ago

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse Pedpsw Tbw Ajfx Agqogw - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: new, Year of construction: 2025, Weima single-shaft shredder Type: WL 4 Rotor diameter: 260 mm Rotor width: 600 mm Self-cutting hopper Logspaser (600x1050 mm) Pjdoxwyx Sspfx Agqegw Motor power: 18.5 kW Double knife row with 28 pcs. Weight: 1300 kg Extraction nozzle: 160 mm incl. bolted extraction trough. Screen perforation: 15 / 20 mm (or as requested and agreed) Stock machine immediately available. Price ex stock Rosenheim, excluding shipping.

Condition: excellent (used), Rębak Weima WL6, silnik 18,5KW, Pgedpfow Aaumox Agqow długość rotora 800mm, szuflada hydrauliczna, autorewers.

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. Psdpoh Eiw Ijfx Agqogw manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: good (used), functionality: fully functional, power: 18.5 kW (25.15 HP), Weima ECO 600 E shredder, year of manufacture 10/2005 Electric motor: 18.5 kW Drive power via V-belt and gearbox Feed opening: 600 mm x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Rotor length: 600 mm Rotor speed: 60 - 100 rpm Screen hole size: 20 mm Pgjdexf T Hrspfx Agqow Tools: 14 knives Extraction nozzle diameter: 160 mm Weight: approx. 1,300 kg

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Max. feed opening: 400 x 80 mm Slow speed: 250 rpm Pgsdpfx Agoxlm Ntjqew Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg ADVANTAGES Pgedpfx Aew S H Azogqsw – German production – Auto-reverse – Feed drawer – Very good condition – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm Pgedpfxow H Rn Es Agqjw - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: like new (used), Hopper dimensions: 1005 × 600 mm Pgedpjw Iznksfx Agqsw Motor power: 18.5 kW Shaft drive via planetary gearbox Pneumatic pressing drawer Year of manufacture: 2013 Shaft length: 600 mm

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Pgsdpjpdqzxofx Agqow Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, operating hours: 1,192 h, functionality: fully functional, rotor diameter: 260 mm, rotor width: 800 mm, power: 30 kW (40.79 HP), filling opening width: 800 mm, filling opening length: 1,450 mm, working width: 800 mm, Technical data wood and plastic shredder: Manufacturer WEIMA Maschinenbau GmbH Type WLK 800 Year of construction 2018 Operating hours 1,192 hours Drive power 30 kW Speed 90 rpm Rated current 70 A Slow-blow fuse 80 A Hydraulic pressure for horizontal slide 160 bar, load-dependent or pulsed control selectable Rotor type profiled V-rotor Rotor diameter 260 mm Rotor length 800 mm Rotor speed 80 - 125 rpm Number of cutting crowns, concave, 2-row, 42 pieces Cutting crown size 40 x 40 mm Grain size 15 - 80 mm Feed opening 800 x 1450 mm Cutting chamber dimensions 720 x 700 mm Hopper capacity 0.8 m³ Machine dimensions 2,590 x 1,745 x 2,180 mm (l x w x h) PLC control Siemens SIMATIC S7-1200 Screen basket with 30 mm hole size, can be folded downwards Shredder transport weight 2.8 tonnes Machine equipment: Segmented floor 2-sided Free-cutting hopper Electromechanical drive with WEIMA WAP gearbox Hydromechanical starting clutch V-rotor (2-row) Adjustable counter blade for regulating the cutting gap Reversible counter blade Remote bearing for easy maintenance Condition of the shredder: The shredder was only used sporadically for wood and plastic shredding and is in good, ready-to-use condition. The machine is available at short notice. Scope of delivery: 1 Weimar WLK 800 shredder with control cabinet Pgsdpfx Ajwrxklogqow Comments: The documentation (Manual, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2020, Rotor 260 mm Feed opening approx. 800 x 1200 mm Rotor length approx. 800 mm Motor 18.5 kW Technical data upon request Psdpfewzaizsx Agqjgw Required space approx. 2050 x 1550 mm All information without guarantee

Condition: excellent (used), Catalogue number 7293 TECHNICAL DATA - Loading hopper dimensions (top, LxW): 1200x1520mm - Loading hopper dimensions (bottom, LxW): 1000x1520mm - Outlet for shredded wood + auger - Rotor working width: 1500mm - Main motor: 45kW - Pump motor: approx. 1.5kW - Number of knives: 41 pcs - Knife size: 40x40mm - Screen: 15mm x 20mm - Pusher drawer - Electric auto-reverse - Dimensions (LxWxH): 2450x2460x1720mm - Weight: approx. 3000kg Pgsdpfor Hmxdjx Agqow ADVANTAGES – German-made – Very good condition – Used shredder Original photos Net price: 155,900 PLN Net price: 37,120 EUR depending on the 4.2 EUR exchange rate (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Psdpfjrq Eu Rox Agqjgw Rotor diameter: 252 mm Rotor knives: 28 pcs Funnel: 600 x 1050 mm

Condition: excellent (used), Year of construction: 2017, Weima Wood Shredder - Walking Floor Shredder - Low-Noise and Slow-Running Top condition - only 150 operating hours - Type: WL 600 Shaft diameter (mm): 260 Knife length (mm): 600 Knife shaft speed (rpm): 80 - 125 Number of knives (pcs): 14 Max. granulate size (mm): 20/25 Opening (mm): 600 x 800 Extraction port diameter (mm): 160 Motor power (kW): 15 Voltage (V): 400 Working height (mm): 1645 L x W x H (mm): 1,805 x 1,118 x 1,645 Pgodpfjxiq Syjx Agqsw Weight (kg): 1,100 Location: ex-stock 54634 Bitburg - available immediately - Subject to prior sale

Condition: good (used), Rotor approx. 250 mm Hydraulic slider Pgsdpfx Ajwc R Rlsgqjw Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW External dimensions approx. 1750 x 1250 x 1600 mm Technical specifications upon request

Condition: excellent (used), CATALOG NUMBER 7594 Pgsdpov R Tndefx Agqjw Technical specifications: - Feed hopper inlet: 620x800 mm - Discharge outlet for shredded wood: Ø160 mm - Working width of rotor: 620 mm - Main motor: 18.5 kW - Pump motor: 0.75 kW - Number of knives: 30 pcs - Knife dimensions: 30x30 mm - Sieve: 12 mm/15 mm - Pressing drawer - Autoreverse - Dimensions (L/W/H): 1750x1220x1650 mm - Weight: 1020 kg ADVANTAGES – German-made – Original DTR documentation – Autoreverse function – Pressing drawer – Very good condition – Used wood chipper Net price: 39,900 PLN Net price: 9,500 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2025, Year of manufacture: 2025/2 Engine power: 18.5 kW Speed: 90 1/min Weight: 1.3 tons Rotor lengths: 600 mm Rotor diameter: 252 mm Pjdpfx Aovw Tw Eegqsgw Rotor knives: 28 pcs Funnel: 600 x 1050 mm with an extra-ribbed sliding plate

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Feed hopper inlet: 800x1000 mm - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm Pgsdognzd Espfx Agqow - Screen: 0.8x10 mm - Pressure drawer - Electric auto-reverse - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA Pgodpfx Aswrpv Ejgqow - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Top equipment Pgodpfsbtnftjx Agqow Location: Ex stock Bitburg - immediately available - at a special price

Condition: as good as new (ex-display), Year of construction: 2025, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements Pjdpfx Agobunq Heqegw 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available