Wood shredder

WEIMA WL4

Condition: refurbished (used), functionality: fully functional, overall weight: 1,300 kg, WEIMA WL 4 shredder, 18.5 kW Machine for shredding production waste from wood processing, furniture manufacturing, pallets, CLT, particleboard, rubber, and plastics. Mounted on vibration-damping legs. The machine is in fully working condition and has undergone the following repairs: 1. Bearing replacement on the shaft. 2. Complete gearbox service with replacement of 3 sets of bearings. 3. Replacement of the sliding rails of the drawer. 4. New rotor knives. New stationary knives. 5. Replacement of the hydraulic pump. 6. New gearbox and hydraulic oils. 7. New hydraulic hoses. 8. New oil filter. 9. Sandblasting and powder coating of the entire machine. Technical specifications: POWER: 18.5 kW NUMBER OF SHAFTS: 1 SHAFT LENGTH (mm): 600 mm SHAFT DIAMETER (mm): 252 mm ROTATION SPEED: 90 rpm NUMBER OF KNIVES: 14/28 SCREEN SIZE: 15 mm MACHINE DIMENSIONS: 200 x 160 x 120 cm MATERIAL: wood waste FEED OPENING DIMENSIONS (mm): 600 x 800 mm WEIGHT (kg): 1300 kg Lrsdpjz En Nrofx Agrot

Condition: like new (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 08/2027, total width: 690 mm, total length: 930 mm, total height: 1,760 mm, empty load weight: 385 kg, input frequency: 50 Hz, year of last overhaul: 2026, overall weight: 385 kg, electrical fuse: 16 A, power: 4.5 kW (6.12 HP), Planetary mixer Ledpfx Asvdknhogrert Model: Rego PM 60 E Stainless steel design Power adjustment – stepless Safety guard LED control with timer 1 stainless steel mixing bowl, 60 liters 1 beater, 1 flat stirrer robust technology Connection: 400V, 16A CEE plug Used machine, refurbished with warranty + spare parts service Optional: Delivery service Maintenance contract additional mixing bowl additional tool service package instruction & commissioning Many top-quality mixers in stock!

Condition: good (used), Shredding machine Rotor approx. 250 mm Hydraulic slide Feed opening approx. 600 x 800 mm Rotor length approx. 600 mm Motor 18.5 kW Functionality tested Lrodpjz Ea Tpefx Agret Technical data available upon request.

Condition: repair required (used), Year of construction: 1995, functionality: not functional, machine/vehicle number: 950/2507, fuel type: electric, Shredder, requires repair, possibly with a defective shaft. Lrsdpfsz Dt Uwex Agrot The device must be picked up.

Condition: good (used), Year of construction: 1993, Rotor width 800 mm Ljdpfx Aop H Sv Dsgrjrt 22 kw motor 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: good (used), Year of construction: 2010, Engine size : 18,5 Kw Opening : 600 x 1000 mm Number of knives : 28 trapez knives Rotor diameter : Ø 250 mm Rotor length : 600 mm Rotor rpm : 90/min Siewe holes : Ø 15 mm Dust extraction nozzle : Ø 160 mm Can be examined in working condition, ask for WHATSAPP demo. Lodpfxez Dn Ufo Agrjrt Mounted with new knives + counter knive Weight : 1300 Kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, From year 2016 but has never been in use. As new. The machine has never been used in production. We have only tested it for a short period of time. Data: Ljdpfxjz Dg Iqs Agrjrt Opening: 600X1.050 mm. Rotorlenght: 600 m. V-rotor with 28 reversible knifes. Motor: 18,5 kW. 400V, 50 hz. RPM: pp. 100. Weight: 1300 kg. Lenght/width/height: 2.045X1.165X1.640 mm. Original manual included. WEIMA - Made in Germany. Screen not included. Available in 10/12 mm 15/20 mm 20/25 mm 30/35 mm ect. Ask for quote. Very good for wood, plastic, composite ect. IN STOCK. We ship all over Europe.

Condition: used, Year of construction: 2026, Special price – demonstration machine, Garbsen. Our WL 6 machine concept. The Weima high-performance shredder, with its flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, achieving a significant volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be loaded via a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without requiring manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent controlled. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston seals. The patented and profiled V-rotor, made of solid steel, has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive, and four-way rotatable knives/cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction in the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption, and an optimal discharge of the shredded material. The screen located under the rotor determines the chip size (10 - 100 mm). An optionally available, hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor shaft on one side. Precise cutting at high throughput with a profiled V-rotor. The V-rotor, developed specifically by WEIMA, is universally applicable and made of solid material. Its aggressive material feed, with up to two knife rows, guarantees a high throughput with low power consumption. It can be equipped with hardened cutting knives made of steel with edge lengths of 30 mm and 40 mm. These can be repeatedly rotated when worn, which drastically reduces maintenance costs. Intuitive operation thanks to a Siemens PLC control with a touch display. To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. In doing so, we use only high-quality components – for example, from Siemens or Rittal. Intuitively operable touch screens guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. Technical specifications WL 6: Feed opening 800 x 1,250 mm. Hopper capacity 0.9 m³. Rotor length 800 mm. Rotor diameter 256 mm. Drive power 22 kW. Rotor speed 90 rpm. Max. number of knives 42 pieces. Type and size of knives: concave / 40 x 40 mm, cutting crowns. Screen size 10-60 mm. Paint: WEIMA standard RAL 2022 / 7016. Connection value 400 V +/- 5% / 50 Hz. Weight approx. 1,600 kg. Including: - Control cabinet* (Rittal) incl. electrical control (Moeller / Siemens) and S Ledoy D E Tdopfx Agrert

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Ledjz A H Saepfx Agrort Storage location: Supplier

Condition: excellent (used), 18.5 kW 1500 kg In very good condition. Lsdpfx Agsz Ak Dpjrjrt

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 450 kg, lifting height: 9,900 mm, empty load weight: 2,300 kg, fuel type: electric, tire condition: 70 %, drive condition: 75 %, maximum load weight: 454 kg, Self-propelled scissor lift SKYJACK SJ III 4632 11.7 m working core. 317kg thr personal lift SKYJACK SJ III 4632 scissor lift for sale in excellent condition personal lift, work stand with extendable platform. Manufacturer: Skyjack year of manufacture: 2011 load capacity: 454 kg Working height: 11.7 m Raised platform height: 9.7m Total width: 1.9 m Total length: 2.3 m Gross weight: 2300 kg non-marking tires operating hours: 374 TROJAN MOTIVE batteries in good condition. Lodpfxeugtlie Agrjrt built-in battery charger

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Lrodpfoz Ai N Rsx Agret Year of manufacture: 2003 Operating hours: approx. 1,244 h Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm Ledsw H Rn Espfx Agrert - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: new, Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), AZR 600 – 18.5 kW 30 round knives with welded knife holders incl. 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Pusher with hold-down device Vibration-damping machine feet Lredpfxsi Hb Ias Agrot Automatic star-delta start-up Automatic shutdown when hopper is empty Control cabinet with 5 m cable and PLC-controlled Feed opening: 600 x 800 mm Hopper volume: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW – 400 V – 50 Hz – 3 Ph. Hydraulic motor: 0.75 kW – 400 V – 50 Hz – 3 Ph. Subject to technical changes and errors.

Condition: as good as new (ex-display), Year of construction: 2026, Low-noise and low-speed model WL 4/18.5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with log spacer: 600 x 1050 mm Lodpfxjbtnfte Agrert Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm, concave Screen perforation: 15/20 mm Included: Control cabinet Electrical control system Star-delta starter Rubber vibration dampers 2nd knife row Log spacer (self-cleaning hopper) Top-of-the-line equipment Location: In stock in Bitburg - immediately available - at a special price.