Moulder

WEINIG HYDROMAT 23 (9 spindle) GROOVED

Condition: excellent (used), Year of construction: 2001, operating hours: 9,089 h, functionality: fully functional, machine/vehicle number: 94250, WEINIG HYDROMAT H23 ELECTRONIC FEED FREQUENCY CONTROLLED (8 – 60 M/MIN). FEED MOTOR 15 KW 50MM SPINDLES WORKING WIDTH MAX. 230 MM WORKING HEIGHT MAX. 160 MM SHORT INFEED WITH (GROOVED FEED GUIDANCE, SEE USES AND BENEFITS HIGHLIGHTED BELOW) BOTTOM 7.5KW 6,000 RPM RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY RIGHT 7.5KW 6,000 RPM LEFT 7.5KW 6,000 RPM JOINTER READY TOP 11KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY TOP 7.5KW 6,000 RPM OUTBOARD BEARING, JOINTER READY BOTTOM 11 KW 6,000 RPM OUTBOARD BEARING, JOINTER READY 12X TOP FEED ROLLERS 6X BOTTOM FEED ROLLERS CNC ADJUSMENT OF 1ST BEDPLATE FROM CONTROL PANEL Nedjz Dnt Ispfx Agrslg POSSIBLE TO ADD ADDITIONAL STRAIGHT / PROFILE JOINTERS AS NEEDED FULL SOUND ENCLOSURE AUTOMATIC LUBRICATION SYSTEM FULL DOCUMENTATION INCLUDED EXHAUST MANIFOLD INCLUDED MACHINE LENGTH 5.2M POSSIBLE TO OFFER MECHANISATION IF NEEDED POSSIBLE TO OFFER MECHANISATION SPECIFICALLY FOR SHORT LENGTH FEEDING AND STACKING IF NEEDED Grooved Feed Guidance, Core Functions & Benefits: The longitudinal grooves milled directly into the bedplates work in conjunction with custom bottom cutterhead knives or grooving cutters. The initial cutter cuts matching grooves into the underside of the raw stock, registering it securely to the bed's grooves to keep short or cupped boards running straight without drifting off the fence. Friction & Resin Relief: Standard flat bedplates create significant surface drag when feeding wet, sap-rich, or resinous timber (like pine, fir, or green hardwood). The channels reduce overall contact area, lowering friction and preventing suction/sticking. Debris & Pitch Clearance: Sawdust, wood resin, and pitch buildup can cause uneven heights or feeding jams. Grooves act as evacuation paths, allowing fine dust and pitch to fall away from the main bearing surface. Wax/Lubricant Distribution: When paired with an automatic or manual bed lubrication system (such as table lubrication pumps), the grooves help distribute wax/oil evenly across the table rather than letting it wipe away on the first board. Common Applications Short Stock Processing: Ideal for running short pieces (such as parquet components, drawer sides, or short moulding blanks) that would otherwise struggle to maintain parallel alignment against the side fence. Cupped or Unseasoned Wood: Prevents cupped or warped boards from rolling or twisting as they hit the vertical and horizontal cutter spindles. High-Speed Feed Lines: Reduces the strain on feed rollers and drive systems by lowering bed drag during continuous industrial runs.

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Nlodpfx Ageu Agh Sjrog Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Nsdpfxexlcufs Agrolg Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B Nedpfou Udd Sex Agrslg With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Njdpoi Apuhsfx Agrjlg Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Njdpfx Ageifftxorelg Machine dimensions 370 x 200 x 190 cm weight ~ 3000 kg

Condition: excellent (used), functionality: fully functional, Weinig Unimat 1000 Star four-sided planer Working width 20-230mm Working height 8-160mm Number of spindles 6 Spindle arrangement: Bottom 5.5kw 6000r.p.m Njdpevcbr Isfx Agrjlg Right 4kw 7000r.p.m Left 5.5kw 7000r.p.m Top 7.5kw 7000r.p.m Bottom 7.5kw 7000r.p.m Universal 7.5kw 7000r.p.m Automatic height and width adjustment Automatic tabletop lubrication pump Powered rollers in worktop (1 grooved roller for wet wood) Push speed adjustable by variator 5-24m/min Weinig EM10 automatic material feeder

Condition: excellent (used), functionality: fully functional, Working width: 230 mm Nsdpox Hzv Tefx Agrjlg Working height: 160 mm Number of spindles: 5 Spindle configuration: 1. Bottom 15 kW 2. Right 11 kW 3. Left 11 kW 4. Top 15 kW 5. Bottom 7.5 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm 3 feed rollers in the work table Feed speed adjustable via inverter up to 60 m/min Feed driven by cardan shaft Pneumatic pressure rollers Technical documentation Machine dimensions: 300x180x170 cm (H) Weight: 3500 kg

Condition: good (used), Year of construction: 1979, functionality: fully functional, Four-sided planer / moulder Unimat 22N, 7 spindles Year of manufacture 1979 S/N 286512746 Manufacturer Weinig Germany planing width 220mm Planing height 120 mm 7 planer shanks: planing table length 2000mm Spindle arrangement (speed of the working spindles 6000 rpm) 1. bottom, 4 kW 2. left, 5,5kW 3. right, 7.5 kW 4. left, 4 kW 5. top, 7.5 kW 6. bottom, 7.5 kW 7. bottom, 4.0 kW 5, 6, 7 with counter bearing 3 rollers in the table (not driven) spindle diameter 40 mm Flying circle of the dressing spindle 125mm Flying circle of the dressing spindle 100-180mm Largest flying circle of the milling spindles 180mm Cardanic feed Feed infinitely variable (frequency converter) Nsdpfx Aget Eu Htsrolg 6-36 m /min. Manual Waxilit pump External dimensions L 4500 mm x W 1600 mm x 1700mm 4500 kg with 7 planer/knife heads included

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Njdpfsulnr Ajx Agrjlg Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table