Moulder

WEINIG HYDROMAT 3000

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Lodpfx Aoi A Ix Hom Nsaa

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW Laedstkt Tpjpfx Am Nja • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Condition: new, Year of construction: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roller drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Ledpewt T Unefx Am Nsaa

Condition: excellent (used), High speed moulder infeed comprising a freestanding flat magazine in front of a high speed moulder. The infeed magazine is driven by hydraulic motors powered by an 5.5kW hydraulic unit (max 140m/min). A buffer of feedstock is alligned laying flat side by side on the chain cross feeder. The chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and the transport roller then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow operation of the EM814. Ledpfx Aowgbxzem Nsaa

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 174 h, load capacity: 7,000 kg, lifting height: 5,000 mm, free lift: 2,405 mm, fuel type: electric, mast type: duplex, construction height: 3,500 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 8.25 x 15 Rear tires Type: Superelastic Lasdpoq E A Uzsfx Am Nea Rear tires Size: 8.25 x 15 Battery Volt: 80V Battery Ah: 1120Ah Battery year of construction: 2022 Description: Fork positioner, sideshift, Kalmar comfort cab with heating and air conditioning, radio, battery 80 V / 1120 Ah - Nexsys - MAINTENANCE-FREE, charger, 2 LED work lights at the front on the lift mast, 2 LED work lights at the front on the roof, 2 LED work lights at the rear on the roof, indicators at the front and rear, reversing camera, safety light, safety light, rear lights at the front and rear. rear, Rear view camera, Safety-Light, Rear view mirror, Fork positioner, Sideshift, Kalmar comfort cabin with heating and air conditioning, radio, Battery 80 V / 1120 Ah - Nexsys - MAINTENANCE FREE, charger, 2 LED work lights at the front of the lifting mast, 2 LED work lights at the front of the roof, 2 LED work lights at the rear of the roof, Turn signals front and rear, backup camera, Safety light, Rear view mirror, Sideshift, Fork positioner, 3rd valve, 4th valve, air conditioning, scales,

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: Expander Typ OEE 23,2 315KW, type of input current: three-phase, overall weight: 2,800 kg, power: 315 kW (428.28 HP), input voltage: 400 V, Used expander/extruder, versatile, can be used with both hydraulic counterpressure slide and dies (shaping e.g. for animal feed) Machine was purchased, unfortunately cannot be used because our power connection is not sufficient. Available: expander extruder with gear and drive, hydraulic slide (cone not plate), rotary knife and various dies, hydraulic unit with oil cooler. If required, the associated belt dryer is also available. Please send inquiries by email, thank you. Laedpfx Amevlwche Nea

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW Ledovu Sayjpfx Am Njaa 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Without feeder: 125 000€

Condition: new, Jartek dry and green board sorting line Ljdex Ddhkspfx Am Noaa

Condition: good (used), Complete feed of gang saw Esterer HDN 600 was recently removed due to conversion to frequency-controlled feed. Laoder Hmhnopfx Am Nea immediately available Location: Austria, near Wels

Condition: excellent (used), Year of construction: 2015, WEINIG POWERMAT 1200 (6 SPINDLE) YEAR 2015 WIDTH 230MM HEIGHT 160MM ALL SPINDLES 8000 RPM ALL SPINDLES 50MM SHORT INFEED TABLE 1: BOTTOM 7.5 KW 2: RIGHT 7.5 KW 3: LEFT 7.5 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW CNC AXIAL CONTROL ON SPINDLES 3, 4 AND 5 40 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS ANTI-KICKBACK DEVICE AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS Lajdpfxeyub Dxo Am Noa DIMENSION: APPR 3400 X 2000 X 1800 MM WEIGHT: APPR. 4500 KGS DUSTHOODS: 6 x 140 MM DIAMETER DUST MANIFOLD INCLUDED POSSIBLE TO SUPPLY WITH MOULDER INFEED AND DROP LEAF OUTFEED POSSIBLE TO SUPPLY TOOLING IF NEEDED