CNC-Turning-Boring-Milling Centre

WFL Millturn Technologies GmbH & Co. KG M60-G MILLTURN 2000mm

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Giedpfswcfgbox Aacsn Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Giodpfxovvf T As Aacon

Condition: good (used), Year of construction: 2003, travel distance X-axis: 13,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 30,000 rpm, distance between stands: 6,500 mm, spindle nose: HSK A63, X-axis: 13.000 mm Gedpfx Aaott I Sfjcein Y-axis: 4.500 mm Z-axis: 1.000 mm Distance between columns: 6.500 mm C-axis: 190º A-axis: 110º Positioning speed XYZ: 15.000 mm/min. Positioning speed AC: 10 tpm CNC Controller: Siemens 840D Spindle nose: HSK A63 Spindle speed: 30.000 rpm Spindle power: 20 kW Toolchanger: 20 Pockets Torrestool tables: 16x X-axis: 11.500 mm Y-axis: 3.500 mm Z-axis: 750 mm Country of origin: Spain Machine size LxWxH: 19.000 x 11.000 x 6770 mm Machine weight: 70.000 kg The Torresmill Gantry is a 5-axis CNC milling and drilling machine, specially designed to work on aeronautical materials (Composite, Aluminum, Titanium, Steel, ...). The Torresmill gantry is perfectly combined with the Torrestool universal clamping device, guaranteeing flexibility and process time.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 56,089 h, Swing diameter over bed/cross slide: 820mm/550mm, distance between centers: 2666mm, max. turning diameter: 610mm, max. workpiece length: 2500mm, travel X/Z: 410mm/2560mm, travel Y: -80mm/100mm, max. workpiece weight without/with tailstock: 500kg/1500kg, tool positions: 12, rapid traverse X/Z/Y: 24m/30m/12m/min, feed force X/Z/Y: 17kN/20kN/17kN. Machine dimensions X/Y/Z: approx. 5500mm/2250mm/2550mm, weight: approx. 15000kg, operating hours: approx. 56089. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Godpew Dfhuefx Aacjin

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers Gsdpoxayl Defx Aacjin - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, overall weight: 17,500 kg, working width: 1,300 mm, working height: 1,300 mm, working range: 1,300 mm, Amada H1300 Horizontal Bandsaw (1982) Capacity 1300 x 1300mm Power 230 V – 50/60 hz / 400 v – 50hz / 460 v 60hz Blade drive 11 kw Hydraulic drive 3.7 kw Coolant drive 0.4 kw Wire brush drive 0.4 kw Blade size 11380mm x thickness 1.6 x width 65 mm Net weight 17.500 kgs Total power requirement 16 kw Machine Data: Gisdpetv E Hcefx Aacsn Model H1300 Year of Construction 1982 Built in Japan

Condition: used, Year of construction: 2025, faceplate diameter 2.500 mm swing diameter 3.000 mm turning height 2.000 mm Control Fanuc max. Torque 55.010 Nm cutting capacity max. 5.000 kgf max. workpiece weight 15.000 kg table: table diameter 2.500 mm table speeds 1,0 - 150 1/min power capacity - table 60/75 kW C - Axis: resolution 0,001 ° Working speed 0 - 900 °/min max. table speed 2,5 1/min turret slide: Gedpjvp Sc Djfx Aacein Shank diameter 50 mm spindle cone ISO 7/24 / No.50 Spindlespeed 15 - 1.500 min/-1 power capacity - Tool Spindle 22 / 26 kW max. Torque 280 Nm ram cross section 280 mm axis stroke: x-axis 1.700 mm z-axis 1.600 mm cross rail adjustment 1.000 mm Tool-Presetter: tool taper MAS-BT 50 number of toolpositions 24 (12 + 12) pos. max. tool weight 70,0 kg draw bolt P50T-I feeds: rapid feed (X / Z) 10,0 m/min feed speeds max. 10.000 mm/min rapid traverse of the crossrail 300 mm/min total power requirement 200 kVA weight of the machine ca. 60,0 t dimensions of the machine ca. 11,00 x 9,00 x 8,50 m CNC - Vertical Turret Lathe HANKOOK - VTB 250 E - NEWMACHINE (related picture)

Condition: good (used), Year of construction: 2022, UK DELIVERY ONLY Gsdpsu Spvqsfx Aacein Developed for the shop-floor, the TIGO SF is a fully-protected and versatile coordinate measuring machine (CMM) that combines robust construction, innovative technology and flexibility of setup to ensure high-accuracy measurement in the harshest of environments. Tigo SF 5.6.5 HH-A-T5, 5° Automatic Indexing Head HP-S-X1S Analogue Scanning Probe Standard Styli Kit PC-DMIS Measurement Software Year of Manufacture 2022 Please contact us for alternative configurations. Measuring Range: X 500mm, Y 580mm, Z 500mm MPE(E0/E60) (18 °C - 22 °C) 2.2 + L/300 See Datasheet for further information.

Condition: excellent (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 8520-7-10558-FA, measuring range X-axis: 2,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 2,500 mm, Equipment: documentation/manual, Purchased brand new in 2023 for a project but no longer required. Only used for a number of hours - approx 50hrs. Tripod Table / Machine mounting ring Carry case Includes Dell Mobile Precision Workstation 7780 (Laptop of value £4,486.00) with PC DMIS 7-Axis Arm with 2.5 m Measurement Volume, Includes: • Absolute Encoders and SMART Sensors • Zero-G Counterbalance with SmartLock and HomeDock • Wrist Display • Haptic Feedback • Bluetooth wireless interface for wireless accessories • Spin Knob and Spin Grip • Base Plate with Mounting Ring • TESA TKJ Ball Probes: 3 mm Ruby / 6 mm Ruby / 15 mm Steel • Certified Length Standard • RDS Maintenance and Interface Software • Travel Case and Accessory Case • Power supply • Hexagon Dust Cover • ISO 10360-12 Certificate Removable Pistol Grip for Probing in Standard Mode (with Pistol Grip) or in Compact Mode (without Pistol Grip) Includes: • Nose Cone • 3 sizes of Pistol Grip Handles: Small / Medium / Large • The medium size grip is mounted on to Pistol Grip main body • Certified Sphere for Probing Wireless Pack (CP-W) shipped fully configured and mounted on t he arm. The CP-W provides: • Single Ethernet connection for all touch probes, tube probes and scanners (HP-L-8.9, HP-C-V3D, AS1, RS6, RS5 and RSSQUARED) • Wireless connections for all touch probes, tube probes, AS1, RS6, RS5 and RS-SQUARED. (HP-L-8.9 and HP-C-V3D do not support wireless connections). • One Ethernet to USB adapter, for users who prefer a USB connection to Ethernet • Battery operation available (with hot-swappable batteries) Includes: • Wireless Pack CP-W • ODU-Ethernet Cable - 3m Giodpfxjwhwdpj Aacon • Ethernet Gigabit adapter • Two rechargeable batteries Note: CP-W is certified to IP54 when mounted on the arm MST138 Portable Precision Carbon Tripod Precision carbon tripod for Absolute Tracker AT930/960, ATS600 or Absolute Arm. The MST138 has the following features: - Foldable tripod with carbon legs - Height scale on center leg - 3x integrated fixed positions for AT Controller/ATS Controller or external batteries MPB25/MPB100 - 3.5x8’’ thread to mount Absolute Tracker AT930/AT960, ATS600 or Absolute Arm - Adjustable height: 79 cm – 131 cm (31.1’’ – 51.6’’) - Weight: 13.5 kg (29.8 lbs) Compatibility: AT930, AT960, ATS600, AT403 TM6100A with MSI140 adaptor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 TruBend 5130X Press Brake BendMaster Robotic Bending System Gijdpjxdfqmefx Aacen Control System: TASC 6000 (robot and press are programmed via the machine interface) Press Brake Specifications: Press force: 130 tons Bending length: 3,250 mm Year of manufacture: 02.2016 More information and video available on request ...