Welding Table

WMT P 4000 x 2000

Condition: ready for operation (used), Year of construction: 2023, operating hours: 4,937 h, pressing force: 102 t, overall weight: 7,200 kg, number of axes: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for various applications. With a weight of 7200 kg and a control system of AMNC3i with Lite Mode, it offers advanced capabilities. Consider the opportunity to buy this AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 Laedpfsyk Dc Njx Amveg • Installed power: 18.6 kW • Full load current: 29.8 A • Noise level: 72 dB(A) • Press beam length: 3110 mm • Opening width: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite Mode • Configuration: Without crowning • Tool clamping: S-GRIP DUOTools available:3 Amada punches no. 831206, 835 mm long, and 1 split version 3 Amada punches no. 820806, 835 mm long, and 1 split version Plus dies: 3 pieces V 16 / H 120 / 85° x 835 mm long and 1 piece split design 2 pieces V 16 / H 120 / 88° x 835 mm long 3 pieces V 32 / 85° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 88° x 835 mm long and 1 piece split design 3 pieces V 16 / V 25 / 88° x 835 mm long and 1 piece split design 3 pieces V 8 / V 12 / 30° x 835 mm long and 1 piece split design

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes Ledpfx Ajynbmmsmvoag only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Ledpeh Dqb Defx Amvsag Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, range L-W-H 1250 x 460 x 940 mm weight 88 kg 9 St. Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x sturdy handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball-bearing guides. (Double bearing) All drawers can be opened 100%. Internal dimensions of the upper wide drawer 105 x 40 x 10 cm. Inner dimensions of the upper 6 narrow drawers 49 x 40 x 7 cm. Inner dimensions of the lower 2 narrow drawers 49 x 40 x 23.5 cm. Lsdpfou Imc Tox Amvoag

Condition: used, Year of construction: 2020, carrying capacity 5000 kg length 5000 mm width 2000 mm height 500 mm weight 1250 kg length in total ca. 6300 mm transport measurements ca. 5900x2000x500 mm Like new, only used 3 times Lasdow I Hqwjpfx Amvog Heavy-duty trailer with double swivel steering - Small turning circle - Tilt-proof thanks to steering angle limiter - Robust, low maintenance - Reversible drawbar - 30 mm impregnated wooden support. - Coupling eye diameter 40 mm - Tire dimensions approx. 425 x 260 mm

Condition: good (used), Clamping plate with grooves, marking plate, measuring plate, measuring table, straightening plate, marking plate Lasdendzycspfx Amvjg -Clamping surface: 2995 x 2500 mm -Clamping plate: with grooves, no T-slots -Height: 300 mm -Groove width: 10 mm -Groove spacing: 200 mm -Transport dimensions: 3100/2500/H300 mm -Weight: 5000 kg

Condition: new, table length 2990 mm Laodpfx Amoxpxrhjveg table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Surface flatness 0.2 - 0.5 mm over 1000 mm.

Condition: used, overall weight: 3,150 kg, operation weight: 3,150 kg, maximum load weight: 3 kg, Year of construction: 1955, maximum speed: 30 km/h, First registration: 06/01/2026. We are selling one restored Mercedes-Benz Unimog U 401 vintage vehicle from the 1955 model year. Slightly oily, otherwise in very good condition. 25 hp, unladen weight 2150 kg, payload 1000 kg, permissible total weight 3150 kg, all-wheel drive, 25 hp diesel engine OM636, tire size 6.50x20, trailer hitch, convertible top, displacement 1767 cc, 30 km/h. Further details are available upon request. Storage location: 94491 Hengersberg. Laodpfxsyq At Hs Amvog

Year of construction: 2026, condition: new, Three-phase powered positioner Table and arm rotation using hydraulic turntables Arm height adjustment using a hydraulic cylinder Control of functions on the positioner housing Useful for positioning components during: welding cleaning assembly Increases work efficiency by up to 40% The ability to rotate without limitations in 2 axes, and with additional vertical and horizontal movement, allows for any positioning of the clamped object (including upside down). The 3-axis positioner provides a significant improvement in working conditions compared to traditional rotary-tilting positioners (optimal object positioning, easy operation). Advantages and benefits: For the employer: Increased work efficiency by up to 40% through optimal object positioning - resulting in a short payback period for the device Increased production efficiency without requiring additional space in the production hall Improved quality of welded joints - always possible to weld in the downhand position The robust design of the device ensures long-lasting, trouble-free operation For the operator: Ensures an ergonomic working posture Minimizes the risk of accidents - no need to change the object clamping Eliminates work interruptions caused by waiting for a crane Easy assembly and operation Full automation of welding is possible by using Kawasaki welding robots. Our offer also includes positioners with a robot and an integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE FOR POSITIONER OPERATION Ljdpjiuna Esfx Amvsag FOOT PEDAL WITH CABLE FOR TABLE ROTATION CONTROL SMOOTH ADJUSTMENT OF TABLE ROTATION SPEED AND ARM ROTATION SPEED CONSTANT TABLE ROTATION FUNCTION ARM LENGTH AND SHAPE TABLE SIZE AND SHAPE ROTATIONAL MASS We can manufacture a positioner according to individual customer specifications.

Condition: used, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 1250mm -Length: 1595mm - Height: 47mm - Holes: M16 grid 50 x 50 mm -Drilling: 22 mm grid 450 x 400 mm Lajdpsiaqngjfx Amvsg -Plate: without straight edge -Number: 1 piece available -Weight: 700kg