Lead/traction spindle lathe

WMW DLZ 1000/IIIx10000

TECHNICAL DATA:
Circulation diameter over bed 1,000 mm
Diameter in the recess 1,120 mm
Circulation diameter over bed slide 690 mm
Center height above floor 1,110 mm
Center height above bed 460 mm
Width of the bed 800 mm
Width of the recess in front of the faceplate 550 mm
Turning length 10,000 mm
Max. Center width 10,535 mm
Diameter of the faceplate 1,000 mm
Diameter of the lead screw 60 mm
Cross section of cutting steel 40 x 63 mm
Maximum permissible workpiece weights
Between centers, without setting vice 5,000 kg
Two centers, with 1 setting vice 6,300 kg
Between centers, with 2 setting sticks 8,000 kg
Drive power of the main motor
For speed series 1,2 22 kW
For speed ranges 3,4,5,6 30 kW
Speed of the main motor
For speed ranges 1,2 1000 min-1
For speed ranges 3,4,5,6 1500 min-1
Number of work spindle speeds
For speed series 1,3,5 22
For speed ranges 2,4,6 18


Page -2-


Speed of the working spindle speeds
For speed series 1 2.8...355 min-1
For speed series 2 7.1...355 min-1
For speed series 3 3.55...450 min-1
For speed series 4 9...450 min-1
For speed series 5 4.5...560 min-1
For speed series 6 11.2...560 min-1
Fpjdpsu R Hzhofx Aaler

Step change 1.25

Maximum permissible face plate speed 355 min-1

24 Normal longitudinal feeds 0.25...3.55 mm/rev
14 longitudinal feeds fine 0.05...0.224 mm/rev
24 normal face feeds 0.09...1.25 mm/rev
14 fine face feeds 0.018...0.08 mm/rev

Thread pitches normal
22 pitches in mm 1...14
24 pitches in gear to one inch 28...2
18 pitches according to module 0.25...3.5
24 pitches according to diametral pitch 112...8

Fine thread - protruding values 1.5

Steep thread - protruding values 12 times

Steep thread for speed series 1,3,5
With spider face plate - protruding values 32 times

Maximum permissible workpiece weight
Without setting vice 5000 kg
With 1 setting vice 6300 kg
With 2 setting vices 8000 kg

Maximum torque 1700 mkp

Characteristic speed for speed series 1,2 9 min-1
Characteristic speed for speed series 3,4,5,6 14 min-1

The listing was translated automatically. Translation errors are possible.