Bicycle hoop rack, single-sided, 90° - 1 unit

WSM

Condition: used, Bicycle rack, model 1, with 90° angled supports. Bicycle spacing: 4. * Welded construction * Space-saving bicycle parking due to alternating low/high positioning * Bicycle spacing: 350 mm * Sturdy, hot-dip galvanized steel construction with robust, round tube supports, diameter 18 mm. Kdodpfe Aadf Ssx Ag Asu

Condition: used, Bicycle rack, model 1, 90-degree angle. Bicycle spacing: 4, adjustable. Disassembled for shipping. · Bolted construction · Space-saving bicycle parking through alternating low/high positioning · Bicycle spacing: 350 mm · Sturdy, hot-dip galvanized steel construction with robust round tube frame Kdsdsz U Sd Hjpfx Ag Aou

Condition: used, Bicycle rack, model 1, 90-degree angle. Wheel spacing 5, as per drawing, disassembled, WSM. Kdjdpfoz U Drpox Ag Aju · Screwed together · Space-saving bicycle parking through alternating low/high positioning · Wheel spacing 350 mm · Stable, hot-dip galvanized steel construction with robust round tube supports.

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which reduces the formation of abrasion due to filling levels and vibrations. Function: It is a feeder that combines the advantages of helix conveyors with the need for clean processes. Special feature: The shortened sorting helix (effective length) is the core innovation to minimize contamination from abrasion. Application area: It is used where a high degree of cleanliness is required during feeding to ensure clean screwing/fastening. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt brake Helix conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm Kodpfxox Elkfo Ag Ajdu W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 Volts You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation, specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting spiral, which minimizes the generation of abrasion caused by material level and vibrations. Function: It is a feeder that combines the advantages of screw conveyors with the need for clean processes. Special feature: The shortened sorting spiral (effective length) is the core innovation to minimize contamination through abrasion. Application area: It is used where a high level of cleanliness is required during the feeding process to ensure clean assembly. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and contamination barrier Screw conveyor WFL 200 IU (200 mm) with singulation device Aluminum frame with plexiglass housing Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Ksdox Elfcspfx Ag Aodu Screws: M 2.5 x 6 mm Voltage: 230 volts You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), WSM Stationary Screw Unit, Assembly Station Assembly of components for car radios and navigation systems, as well as testing of these components. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with interlocking (locking). The doors are locked in automatic mode and can only be opened when the automatic mode is stopped or in manual mode after pressing the "Doors" button on the control panel. The automatic mode cannot be started when a door is open. Functional Sequence The station is loaded with the pre-assembled unit via the conveyor belt. The following describes the work steps of the automatic station with a process flow for a WT (test object). In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled unit in Station 2.1 - Lowering the carrier with the scanner and vision sensor - Scanning the 3 codes (front panel, front PCB, SD PCB), comparison with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the belt - Positioning the WT with the pre-assembled unit in Station 2.2 - Positioning the screwdriver and screwing in the front PCB - Lowering the WT onto the belt Kdjdpfsibichsx Ag Asu - Positioning the WT with the pre-assembled unit in Station 2.3 - Lowering the light shield and making contact, moving the carrier with the test sensors from below - Type-dependent testing of the lighting of the SD + CD slots and buttons - Functional test of the CD eject button - Lowering the WT onto the belt > continue If errors occur during the test, they are displayed on the display and can be corrected if possible. To do this, switch to manual mode and open the doors. After the repair and starting the automatic mode, the WT is tested again in the station. If no repair is possible (e.g., screwing error), the WT is marked as NIO (Not In Order) in the control system and is no longer processed. Manual NIO marking and removal are also possible. More new and used assembly stations - find them in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, Equipment: lighting, Hall office / supervisor office WSM W10, 3 x 2 m with electrical wiring and LAN Hall office / supervisor office WSM W10 – modular room system for indoor installation, 3 x 2 m, fully equipped with electrical wiring and network connections. Used hall office from the renowned manufacturer WSM (Walter Solbach Metallbau), ready for operation. Suitable as a supervisor office, storage office, workshop office, or control center in production and storage halls. Technical data: - External dimensions: 3,045 x 2,045 mm - Height: 2,680 mm, clear height 2,500 mm - Floor area: approx. 6.2 m² - Design: indoor installation (room-in-room), with floor - Steel structure with crane lifting points, can be moved as a complete unit - Glazing on 2 sides (long side and end side) - 1 entrance door with ventilation grille - Frame blue, wall panels white Electrical and network installation: - Power supply via CEE plug 32 A - Sub-distribution with circuit breakers - Several double sockets in the parapet channel Kdjdpez Hftkjfx Ag Aju - Network sockets RJ45 at the workstation, LAN cabling installed - Ceiling lighting Interior: - Permanently installed desk with solid wood top - Acoustic slat panels in wood look on the rear wall Condition: Used, fully functional. Interior in very good condition. Exterior shows signs of use, individual small dents in the lower wall panels. Floor shows signs of use. Comparable new price including electrical and network equipment: approx. €6,000 net. Scope of delivery: as shown in the pictures. Location and loading: - Location: 99428 Grammetal (Thuringia, near Weimar) - Loading onto a truck possible on site - Delivery and installation on request - Viewing by appointment Invoice: Sale by a specialist dealer with a proper invoice and VAT shown. Price net plus statutory VAT.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility Kdodpfx Agezardtj Aou SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent