High throughput ambient cooling spiral.

York Spiral cooler

Year of construction: 2021, condition: new, ebmpapst EC-centrifugal module, backward-curved, single-intake, with support bracket Type: K3G250-PR04-H2 Motor: M3G084-DF Phase: 1~ Nominal voltage: 230 VAC Redpsi D Ei Asfx Ankjcd Nominal voltage range: 200 .. 277 VAC Frequency: 50/60 Hz Method of obtaining data ml Speed: 3080 min-1 Power consumption: 500 W Current draw: 2.3 A Min. ambient temperature: -25°C Max. ambient temperature: 40°C The fans are new and in priginal packaging with 18 pieces per pallet of the production year 10/2021. There are several pallets available. Incl. packaging ex works 53567 Buchholz (Westerwald), Germany. We will gladly organise freight. Please enquire about freight costs, stating the destination.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Rjdeykrtpepfx Ankecd Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. Redoxvca Aspfx Ankscd E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 245988600001002, nominal power: 378.4 kW (514.48 HP), total length: 6,900 mm, total width: 1,100 mm, total height: 2,300 mm, type of cooling: air, Brand new Lu-ve EAV80-90 air-cooled condenser for Freon. We can supply this condenser with matching fans. The condenser block has minor transport damage. The condenser has a capacity of 378.4 kW at an air flow rate of 80,000 m³/h. Specifications: Brand: Lu-Ve Model: EAV80-90 Product type: air-cooled condenser Capacity: 378.4 kW (based on an air flow of 80,000 m³/h) Number of fans: 6 Rcsdpfx Ajx A Ta Tonkod Refrigerant: Freon Surface area: 716.1 m² Dimensions: 6900x1100x2300 mm (LxWxH) Weight: 1047 kg Year of manufacture: 2024