Shredder

ZENO ZTLL 1000x1200

Condition: used, Year of construction: 2007, No. 04468 Single-shaft shredder ZENO ZTLL 800 x 1000 Used, year of construction 2007 3200 operating hours This chipper is used for shredding wood, paper, plastic, residual waste, etc. Lslhcdov Rpvwjwvjrn Inlet cross-section 800 x 1000 mm Hole diameter in screen 25 mm Rotor diameter 300 mm Rotor width 800 mm Number of knives 20 Drive motor 15 kW Soft start control Suction connection 250 mm CE-compliant TÜV/GS-tested Transport dimensions 2000 x 1400 x 2000 mm LWH Weight approx. 1800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: repair required (used), Year of construction: 1992, Feed opening: 600 x 1,000 mm Hopper capacity: 0.6 m³ Throughput: 2.0 - 3.5 rm/h depending on material and screen Rotor diameter: 250 mm Rotor length: 600 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 160 mm Air speed: 23 m/sec Motor power: 15 kW The machine's bearings need to be replaced. The machine needs to be overhauled. Therefore, it is being sold at a reduced price. Location: From stock, 54634 Bitburg Lolov Npf Ashcdwvorn - available immediately -

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, Functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Lrelhsu Thabecdwven Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2000, 75kW Lslhcdwjhwd Huevsrn incl. trough chain conveyor ZENO TKF 600x7600 (2007) and magnetic drum ZENO ZMT 500x620 (2007)

Condition: ready for operation (used), Working width: 1400mm, infeed cross-section X/Y: 1400mm/1600mm, drive: 45kW, 1500rpm, rotor flight circle: 380mm, rotor speed: approx. 105rpm, number of cutting tools: 52, screen design: 12mm perforation, screen diameter: 30mm, hydraulic unit: 2.2kW, 1420rpm. Dimensions X/Y/Z: 2740mm/2270mm/2390mm, weight: approx. 5400kg. Documentation available. Lrslhstph Htjcdwvsn

Condition: used, Year of construction: 1993, Feed opening: 800 x 1,000 mm Hopper capacity: 0.8 m³ Throughput capacity: 2.5 - 4 rm/h depending on material and screen Rotor diameter: 300 mm Rotor length: 800 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 250mm Air speed: 28 m/sec Motor power: 15kW Operating hours: 4165 Lolhcjqmmldsdwvjrn

Condition: used, Inlet cross section: 5,000 x 3,500 mm Drive: 2 x 110 kW Hydraulic power unit slider: 22 kW rotor flight circle: 635 mm Rotor design: 244 pcs. inserts on tool holders Lrolhcdwjbq Stweven Screen design: solid screen basket, reinforced with ribs, hydraulically swivelling away hopper volume: approx. 40 m³ machine weight: approx. 55 t

Condition: ready for operation (used), Year of construction: 2010, Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available. Lslhcdwstpp Hpevsrn

Condition: as good as new (ex-display), Intake opening: 2000 x 1900 mm Motor power: 2 x 75 kW Rotor flight circle: Ø 600 mm Rotor speed: approx. 84 rpm Lrolhcdscb Dttewvsn Cutting system: 152 cutting inserts 40x40x20 mm on toolholders Screen perforation: with this Screen perforation is for achieving the security levels P2 to P5 Counter knife: with cutting gap adjustment Machine weight: approx. 21.000 kg Machine number: A 32

Condition: used, Intake opening: 1.200 x 1.600 mm Motor power: 110 kW, without gearbox Ljljbq Stqehcdwvsrn Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5.900 kg